OHT owners club!
-
@Bancomat85 said:
Punch to the pivot method? How can i do it?I personally wouldn't bother because the slightly loose pliers give the spring room to function.
But if you must, pop off the two retaining link clips and remove the plier head.
Place one side of the plier pivot against something hard and hit the other side with a punch. -
Overall, if I could find one on clearance or trade a few unused MTs away, OHT owners, would it be worth it?
-
I don't regret mine. Love the look of the BO version most.
I haven't used it much but it has great fiddle-factor. :DHere's my 2c on your thoughts about it's shortcomings GLBM:
Flimsy handle scales. - Mine seem fine.
Tools drag on said scales. - Not an issue on mine.
Ridiculous twist lock mechanism that has no positive positioning, so you can turn it and not know. - Hasn't been a problem for me, although I tend to not lock it.
Plier spring system makes tool bulkier than necessary. It didn't need to be spring loaded. IMO. - I LOVE that the pliers are spring-action.
Excessive hot spots when squeezing handles. - I found the handles really comfortable.
Can opener could have been nixed, small flat head put in its' place and much longer main blade could have filled an entire 'slot'. - I think being aimed at military it needed to have a can opener.
Plier jaws only meet at the far tips. Holding thin stuff is not practical/possible. - I think there is a good reason for that... explained on another thread.
No practical bit kit options. - True, but I think it's meant to be self-contained multitool.
Standard "molle" sheath is junk. The edge liner at the top tears within days. - True, the pocket part especially. I also think it's a litttle too small for the OHT which doesn't help. -
@Syncop8r said:
I don't regret mine. Love the look of the BO version most.
I haven't used it much but it has great fiddle-factor. :DHere's my 2c on your thoughts about it's shortcomings GLBM:
Flimsy handle scales. - Mine seem fine.
Tools drag on said scales. - Not an issue on mine.
Ridiculous twist lock mechanism that has no positive positioning, so you can turn it and not know. - Hasn't been a problem for me, although I tend to not lock it.
Plier spring system makes tool bulkier than necessary. It didn't need to be spring loaded. IMO. - I LOVE that the pliers are spring-action.
Excessive hot spots when squeezing handles. - I found the handles really comfortable.
Can opener could have been nixed, small flat head put in its' place and much longer main blade could have filled an entire 'slot'. - I think being aimed at military it needed to have a can opener.
Plier jaws only meet at the far tips. Holding thin stuff is not practical/possible. - I think there is a good reason for that... explained on another thread.
No practical bit kit options. - True, but I think it's meant to be self-contained multitool.
Standard "molle" sheath is junk. The edge liner at the top tears within days. - True, the pocket part especially. I also think it's a litttle too small for the OHT which doesn't help.I am curious and no offense intended. And I thank you for the rebuttle. But, have you tried to EDC your OHT? I thought it was the bee's knees until I carried it a couple of weeks. That is when the handle scale/drag issues and grip discomfort became obvious. My plier lock remained off, but just putting it in the sheath would twist it sometimes. Absolutely no positive positioning on either of my OHTs plier locks. It was always a mystery if the pliers would flik out or not, because of it. I can remedy some of the issues, but I don't personally recommend the OHT at $80. My personal opinion is that there are several MTs in the price range that are superior.
But, in the end, MT assertions are mostly opinion/subjective observation really. I did not intend(or desire) to have an OHT debate, because it is all so subjective, but *you * asked me and I replied. :P
-
Sorry for turning it into a debate! I'm not questioning your experiences, as you have said I asked for yours, and I have given mine. I'm just interested in others' points of view (and why they are different to mine!).

@gerleatherberman said:
But, have you tried to EDC your OHT?No to be fair I haven't. So I perhaps I would agree with you if I had.

I often wonder about a pocket clip on the OHT...
-
@Syncop8r said:
Sorry for turning it into a debate! I'm not questioning your experiences, as you have said I asked for yours, and I have given mine. I'm just interested in others' points of view (and why they are different to mine!).
@gerleatherberman said:
But, have you tried to EDC your OHT?No to be fair I haven't. So I perhaps I would agree with you if I had.

I often wonder about a pocket clip on the OHT...
It's all good.

It is important in the big MT picture that everyone voices their experiences. If it weren't for MT.O, I would still be using a Gerber pinchy and probably having my hand removed from persistent palm trauma.The OHT has some cool things going on. And admittedly, I tend to be overly critical about MTs.
A pocket clip could be kind of neat. Looking at mine, the clip could possibly be installed by drilling out the handle pivot and using a new peen rivet to attach a pocket clip. Tricky part would be where to secure it on the out-facing scale below the bypass area. Looks like there is a space to create a lock point behind where the lg. flat head (one side) or phillips (other side) fold in. There is enough scale room for this in theory. This would allow a pretty deep ride in theory. Maybe one of the mod pros on here could chime in. I did look at plier clearance and see no reason this couldn't work. :ahhh -
I'm looking at the other end, secured by the pivot, passing through the hole at the top (or is it the bottom?) then folding down...
I like MTs primarily for their gadgetiness rather than their actual usefulness to me. Otherwise NONE of them would be worth the money (to me).

-
Camo with free shot tool
.jpg)
-
Very cool!

-
Camo with free shot tool
Is that Camo or snake print?
It is very cool looking, and have never seen another in that pattern.
Sent from my iPhone using Tapatalk
on the box it said camo, but parts of it look like snake scales
-
Did you purchase at a SHOT show?
Sent from my iPhone using Tapatalk
-
Perfect for hiding in a rattlesnake den.
-
Hi guys! How can i do to remove the pliers on my oht? I thought that should it be easy, just removing the clip on the buttons... but they are stiff to remove and i'm afraid to break it... is this the right way or am i doing wrong?
-
I think that is the first camo one I have seen as well
:o 
-
@Bancomat85 said:
Hi guys! How can i do to remove the pliers on my oht? I thought that should it be easy, just removing the clip on the buttons... but they are stiff to remove and i'm afraid to break it... is this the right way or am i doing wrong?I think you are going about it right but I have never taken the plier head off mine so not for sure
:D Good luck though 
-
I'm too scared to try. Maybe Zoidberg well chime in as it sounds like he has done it before...?
-
the camo was bought in Vienna, high street. It was on special and they had a few on offer, 99 Euro down from 130, but I saw it cheaper on eBay. They also had the orange skeletool on offer
I will check if they have any more left in a couple of weeks.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login