Looking for a slimmer Multitool
-
A LM Rebar is relatively slim and open to modding...
Sent on my SM-G930F with Tapatalk
-
Welcome to the forum
how about a juice s2 ? Although would depend on what tools you need daily 
-
Skeletool is pretty thin.
-
Thank you all for the suggestions and the warm welcome. Sounds like the rebar might be the perfect fit size wise. I also saw the Leatherman Wave, does anybody know how wide it is? I like the fact that it has scissors and interchangeable bits, although they're not strictly essential.
-
Quick measurements just now:
Wave 37 mm wide overall (mainly due to the blades which extend out from the handles in width).
Rebar: 34 mm at the locks, these spring in however; 31 mm at the handles.You can do it the MTO way and buy both, then swap the bit driver and scissors from the Wave into the Rebar :D (however modding voids warranty... check the Hacked Leatherman thread for some examples, including my Rebar VX).
Sent on my SM-G930F with Tapatalk
-
Welcome to

I would make a suggestion but a couple that I would have said are already mentioned ;) :D
-
@Dutch_Tooler said:
Quick measurements just now:
Wave 37 mm wide overall (mainly due to the blades which extend out from the handles in width).
Rebar: 34 mm at the locks, these spring in however; 31 mm at the handles.You can do it the MTO way and buy both, then swap the bit driver and scissors from the Wave into the Rebar :D (however modding voids warranty... check the Hacked Leatherman thread for some examples, including my Rebar VX).
Sent on my SM-G930F with Tapatalk
Thanks for the measurements, its greatly appreciated, would you be able to give me the thickness as well?
Anyway looks like the Rebar is the better option for me as I need that smaller form factor.
-
I also would recommend the Rebar

Welcome to MTO !
-
Rebar (right) if looking for new. As mentioned, 31-34mm
Original PST (left) is 27mm for its full length or PST II if old-school is acceptable
Nothing quite as slim and slick and plain old utilitarian as the PST platform
-
Original Super Tool by Leatherman = 31mm
Nobody has mentioned any Swiss Army knives, probably because you mentioned replacing an MP 600, but in case it is an option, a Camper at its widest at the nail knick are is 25/26 mm, although it has no plyers. The Tinker Deluxe has small plyers and is 26mm blade spine to awl, and 22mm scale to scale.
Update: PST = 27mm x 12mm x 102mm
-
I agree the PST/PST II are good options. Rebar too. Let us know what you choose!
-
Willing to bet that if Leatherman pulled the plans and specs of the PST and PST II out of the drawer and started producing them again, as they were, but new production and date codes, they would be purchased. Maybe not as many as the Wave or Surge, but more than enough to justify production costs. I mean, they still produce the Rev for some reason, and I bet a new PST would sell far better than that
-
@ThundahBeagle said:
Willing to bet that if Leatherman pulled the plans and specs of the PST and PST II out of the drawer and started producing them again, as they were, but new production and date codes, they would be purchased. Maybe not as many as the Wave or Surge, but more than enough to justify production costs. I mean, they still produce the Rev for some reason, and I bet a new PST would sell far better than thatThe PST's patent should have expired by now. Anyone could start making it. PST II maybe, too.
And for that reason, we might not ever see Leatherman making them.
-
@ThundahBeagle said:
Willing to bet that if Leatherman pulled the plans and specs of the PST and PST II out of the drawer and started producing them again, as they were, but new production and date codes, they would be purchased.Particularly if the made a knifeless model with a file and a woodsaw! I'd buy half a dozen of them to go with fixed blades in various sizes.
And make a super slim line tool, no file or saw or blade.
Pure tool, even school friendly (at least for faculty and visiting adults).But some of us have been asking for that for years. Just like we want the original Squirt models back because the new ones have sucky scissors.
-
Why not the 600's little brother, the MP400
Great little tool that is very similar to the 600 in loadout and function, just smaller and lighter. I've had mine for 13 years.
-
Welcome to MTO. let me be the first to suggest the Victorinox Spirit or Spirit X. It has outside opening tools, although not one hand opening, and an excellent assortment at that, and is thinner than any comparable tools. I carried mine today for nearly 19 hours, in my back pocket, and I can assure you that it is so comfortable to carry that you won't even notice it.
-
Vic Spirit is very slim.
-
Quick measurements just now:
Wave 37 mm wide overall (mainly due to the blades which extend out from the handles in width).
Rebar: 34 mm at the locks, these spring in however; 31 mm at the handles.You can do it the MTO way and buy both, then swap the bit driver and scissors from the Wave into the Rebar :D (however modding voids warranty... check the Hacked Leatherman thread for some examples, including my Rebar VX).
Sent on my SM-G930F with Tapatalk
Thanks for the measurements, its greatly appreciated, would you be able to give me the thickness as well?
Anyway looks like the Rebar is the better option for me as I need that smaller form factor.
You're welcome
Thickness is 16 mm.Sent on my SM-G930F with Tapatalk
-
just because it's on topic, anybody know the specs for the Pocket Power PLier? It always felt so thin and slim to me...
-
Wow, didn't expect so many options. I'd like to keep the black oxide finish so that should help narrow things down a bit. Swiss army knives are a no go as I need sturdy pliers and the SOG baton is too long therefore a traditional multitool design is probably my best bet.
@ThundahBeagle said:
Rebar (right) if looking for new. As mentioned, 31-34mmOriginal PST (left) is 27mm for its full length or PST II if old-school is acceptable
Nothing quite as slim and slick and plain old utilitarian as the PST platform
Original Super Tool by Leatherman = 31mm
Nobody has mentioned any Swiss Army knives, probably because you mentioned replacing an MP 600, but in case it is an option, a Camper at its widest at the nail knick are is 25/26 mm, although it has no plyers. The Tinker Deluxe has small plyers and is 26mm blade spine to awl, and 22mm scale to scale.
Update: PST = 27mm x 12mm x 102mm
Great stuff, thank you. I'm guessing the PTS is so slim because it lacks a locking mechanism. Ideally I'd like to have that feature, so the Original Super Tool you mentioned could be a great alternative to the Rebar.
@rdub934 said:
Why not the 600's little brother, the MP400Great little tool that is very similar to the 600 in loadout and function, just smaller and lighter. I've had mine for 13 years.
That's actually the first one I looked at, my impression was that it was too wide due to the plastic tabs for the locking mechanism that stick out the sides (just like on my 600). If you have the time could you let me know the maximum width on the 400? I don't know why manufacturers don't publish all the measurements on their websites, it would make life a heck of a lot easier.
@Alan K. said:
Welcome to MTO. let me be the first to suggest the Victorinox Spirit or Spirit X. It has outside opening tools, although not one hand opening, and an excellent assortment at that, and is thinner than any comparable tools. I carried mine today for nearly 19 hours, in my back pocket, and I can assure you that it is so comfortable to carry that you won't even notice it.@Etherealicer said:
Vic Spirit is very slim.I wasn't able to find these in black oxide finish, is that correct?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login