EDC using only maglites
-
More than 20 years ago I Used to carry a 3 D cell Mag Lite and old Mini MagLite for work, now I keep the 3D in my big old Blazer. Don't know where the mini went. then carried an original Steamlight and though that was so much smaller. Sold that and for the last 15 years I've been carrying a Surefire 60.
Maybe it's time to reassess. I like some of the Fenix and Olight offerings, but I see that Mini MagLights have come a long way as well. I'd like to keep buying made in USA, where quality and features are the same or better, so I may get the 272 lumen mini Mag Lite with multiple modes. Or maybe even the 100 lumen. Not decided yet.
-
Seems like it's the LED technology that has allowed these giant numbers of lumens.
-
Thanks for the reply Thundah!
The new offerings are incredibly low cost for the build quality and lumen output. I am not sure how they keep the costs so low being US made, but I love the LED maglites. The 2xAAA(111Lumen) I carry is phenomenal light/value/size IMO. And if the light is too bright, you can just twist the front out some and it gets dimmer. I have been carrying my new one for months now and use it everyday. Still using the same Duracell batteries it came with. The 2xAA(272Lumen) has made it into my tool bag, because it is a bit much with the weight of two MTs, a knife, a boxcutter, pocket level, measuring tape, and pen/marker is a tad bit too much for me personally. Non alkaline batteries can help with weight reduction as well.
I have a stockpile of the harbor freight(free with coupon) non alkaline batteries ready to use when the Duracells run out. :)In short, it is worth giving the new led mags a try, because they really do offer a lot for an EDC light. The pro series led multi mode stuff is pretty good now. The early pro mags have a bad rep, but it seems mag has taken care of any issues with multi mode pro series.
-
What you want is the Mini Maglite Pro+, most likely. That's my EDC light

-
I have the larger D models in the house and cars. One weekend when I was bored I upgraded the Lumens with the Terralux, tactical bezels, and glassbreaker tail caps. Fun.
Coincidentally I decided to upgrade an AA freebie I got from Orkin years ago. Lumens is now 150 and I installed a scratch resistant lens. I’m waiting for the glass breaker bezel and tactical bezel. Again just for fun.
I grew up using Maglites so no other flashlight has felt “right” in my hand. Sadly I don’t edc one but maybe I’ll hive it a shot. You’ve inspired me!!
-
I have a mod AA, I put a led in to up the lumens, but also put a defensive bezel on. Only problem was I cut the turns down, so it like starts to come apart after a few turns. So I’ve been wanting to get one of these for a while, well I snuck one in the cart, only problem is my other one with the bezel is packed, so after our move and I find it I’ll put it on this one..
JR

-
Ok, so I picked up the 111 lumen 2xAAA, and a red 47 lumen Solitaire.
They are nice. I slid the Solitaire into the side pocket of my Leatherman Surge. The 111 lumen is nice too, although maybe a little thin for its length and I wouldn't mind if the head was also kindled, like on the Solitaire. I will try both of them later during the dog walk.
I tried to compare the brightness and beam to that of my Surefire 60, and then I realized, the batteries in the Surefire are many months old and it is not at its brightest. Will refill the batteries this week and compare again, at the local high school football field to check for distance of beam.
I bought the old triple D cell either in the very late 80's or early 90's. It still works, but the crystal is all scratched up, the bulb never seems to quite focus, and the anodized aluminum is all chipped and scratched up as well. I may do an LED upgrade and purchase a new crystal.
I was going to buy the 272 lumen 2xAA, however, it was $26 at home depot and did not offer multiple brightness settings, which I thought was an option on the 272 lumen...
-
@ThundahBeagle said:
Ok, so I picked up the 111 lumen 2xAAA, and a red 47 lumen Solitaire.They are nice. I slid the Solitaire into the side pocket of my Leatherman Surge. The 111 lumen is nice too, although maybe a little thin for its length and I wouldn't mind if the head was also kindled, like on the Solitaire. I will try both of them later during the dog walk.
I tried to compare the brightness and beam to that of my Surefire 60, and then I realized, the batteries in the Surefire are many months old and it is not at its brightest. Will refill the batteries this week and compare again, at the local high school football field to check for distance of beam.
I bought the old triple D cell either in the very late 80's or early 90's. It still works, but the crystal is all scratched up, the bulb never seems to quite focus, and the anodized aluminum is all chipped and scratched up as well. I may do an LED upgrade and purchase a new crystal.
I was going to buy the 272 lumen 2xAA, however, it was $26 at home depot and did not offer multiple brightness settings, which I thought was an option on the 272 lumen...
If you look at my earlier post you will see I recommended the Mini Maglite Pro+. This is a distinct model, the + indicates that it has more power as well as a low mode, as opposed to the non + version which has one setting and a bit less power.
-
My old but never used non-LED Solitaire has been living in my left pocket for a week now, and every time I use it I wonder how I got along without light for so long

Any idea what the difference in battery life is incandescent vs LED?
Mine is not very bright, but it serves the purpose perfectly. If I can getr acceptable battery life, I see no point in upgrading.....
-
The LED solitaire has about the same battery life, but stays bright throughout the battery drain. The incandescent bulbs tend to get dimmer and dimmer as the battery drains.
But, with that being said and you finding the old solitaire adequate, the old saying goes "If it ain't broke don't fix it".
-
@WoodsDuck said:
If you look at my earlier post you will see I recommended the Mini Maglite Pro+. This is a distinct model, the + indicates that it has more power as well as a low mode, as opposed to the non + version which has one setting and a bit less power.Ah, yes. That's the difference alright. Thanks WoodsDuck. They had no "pluses" at Home Depot, but it does appear that's what I want. Looks like I'm taking a trip to Amazon.
By the way, is it just me, or is there no $20-ish dollar, 100 to 200 lumen, with tail switch, multi mode offering from MagLite? Does Fenix and Olight have that market cornered because they can do it at cheaper labor. I saw the XL50, but it was considerably fatter and was $25 or $30. Is that about the size of an Olight I3e or is the olight more the size of the Solitaire?
-
I was having a hard time justifying the purchase of another MiniMagLite when I have a perfectly good untouched vintage one. I could mod it to LED, if only I could bring myself to break open this package:
-
Sixteen years old at best, and MagLite didn't start releasing LED models until eleven years ago.
Normally I would bust this wide open, oil the tool and upgrade the light to LED, but I have another OG Super Tool and have been using my Surefire, so this is just on its own shelf in the cabinet.
-
@ThundahBeagle said:
Sixteen years old at best, and MagLite didn't start releasing LED models until eleven years ago.Normally I would bust this wide open, oil the tool and upgrade the light to LED, but I have another OG Super Tool and have been using my Surefire, so this is just on its own shelf in the cabinet.
Very nice bundle!
I imagine you could find a generous MTo member who would help you to remove the temptation from your life :D
-
Thank you again, WoodsDuck.
Generous MTo member, you say? Relieve me of such a temptation you say? I've not yet encountered such a person.
-
I had a thought to give that bundle to friend who is a custodian/ maintenance and fix it man at a local elementary school. Really good guy. Gave me a giant 2" thick, 5 foot long laminated work bench top from the 70's that is heh-vee! Michigan Maple Block company. He has a LM Wingman that he has beaten to hell but doesn't want to part with it to send it in for repair. So I thought I would gift him this OG ST/ MagLite combo to return the favor. The thing is, he says he uses the scissors a lot, likes th spring loaded plyers head, and doesn't like the OG Super Tool locking system. So it resides on the shelf waiting for the day it can prove itself
-
So I went ahead and just got the 272 lumen AA Pro model without the (+). Got it in grey. What a powerful light! I just can't find the Pro+ in any brick and mortar. Besides, I have the 47 lumen Solitaire, the 60 lumen Surefire, the 100 lumen AAA, and the really old 3 cell D. Who needs a second or third lower setting when I have all of those to choose from?
I also got a Nite Ize L.E.D. / tail switch upgrade. I installed only the tail switch and it didn't work. I don't know if it only works in conjunction with the LED it comes with, or if it just doesn't work with a light that is already more powerful.
-
@ThundahBeagle said:
So I went ahead and just got the 272 lumen AA Pro model without the (+). Got it in grey. What a powerful light! I just can't find the Pro+ in any brick and mortar. Besides, I have the 47 lumen Solitaire, the 60 lumen Surefire, the 100 lumen AAA, and the really old 3 cell D. Who needs a second or third lower setting when I have all of those to choose from?I also got a Nite Ize L.E.D. / tail switch upgrade. I installed only the tail switch and it didn't work. I don't know if it only works in conjunction with the LED it comes with, or if it just doesn't work with a light that is already more powerful.
Was the flashlight head screwed out(maglite on position) when you tried the niteize tail switch? I know you probably tried it, but if it were me, I would have forgotten to do that.

-
Right. Maybe I did fall for that little red herring at first, but I soon realized the error. Still nothing. I'll try again tomorrow. Maybe I'm still missing something. The Nite Ize bulb and head yields only about 30 lumen, so if this tail switch is dependent on including that head and bulb, I will abandon it.
Interesting how the LED AA is longer than the incandescent AA by about half an inch. Small price to pay for going from something like 14 lumens to 272.
-
@ThundahBeagle said:
Right. Maybe I did fall for that little red herring at first, but I soon realized the error. Still nothing. I'll try again tomorrow. Maybe I'm still missing something. The Nite Ize bulb and head yields only about 30 lumen, so if this tail switch is dependent on including that head and bulb, I will abandon it.Interesting how the LED AA is longer than the incandescent AA by about half an inch. Small price to pay for going from something like 14 lumens to 272.
Thank you for trying this. The tailswitch would be awesome on 272 lumens!
That particular model is the Maglite that got me back to using Mags again. A truly awesome flashlight.
Good luck on the tailswitch thundah. I am curious to know if it can be used, so I can put a fatter o-ring in the light head to save my beam setting and switch it on from the tail. I am ok with the twist on/off, but the tail switch would be like icing on the cake. :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
