What did you use your Sak on today?
-

just like... you don't HAVE to shoot rats with rat-shot.... you can shoot snakes too... :D
-
Is a ferret cage meant to hold some small animal?
Yeah, ferrets. Here’s the two,
JRah thought ferret was the type of cage
that punisher guy doesnt look so friendly dont know if that plastic thingie will be able to hold him :DLol, Punisher is the more friendly one, he’s pissed cause he woke up.
JR -
I was very glad to have a CT34 in my bag today.
I had a patient for a retinal scan. This had to be a wide field scan, so I had to attach the lens.
Unfortunately the lock was tightened in the wrong direction and left the lens loose on the camera.
I MacGuyvered it loos by wrapping it in medical tape for grip. The CT34 cut the tape when I was done.The lens in question is big and heavy. When I connected the lens the head of the camera slowly tilted down.
Which makes making a scan impossible as both the patient and the lens need to be kept still.
Luckily the bit driver of the CT34 proved helpful and tightened the slip on the camera and I was able to make some pretty scans.I really like the bit driver. A very useful tool!
-
New socks!
.jpg)
-
Being all packed up for moving where’s the can opener? Oh crap.. never fear the sak is here!
JR
-
@MadPlumbarian said:
Being all packed up for moving where’s the can opener? Oh crap.. never fear the sak is here!
JR
-
Did a strange thing today with my Forester. See somehow nobody gives a damn about the fact that not one flip chart paper roll in my life had ever been fitting the flip chart I used. The holes are always misplaced. Always no matter what the company, city or country that is. And therefore in order to properly install a paper roll you should drill the holes. Well you got the idea [emoji362]



-
mmmm lunch
.jpg)
-
yes, it does! 
-
The "early '60s 4-5 layer Vic" in my recent lot score turned out to be a 1957(8?)-1961 236maU (Ranger) and it's already earning its keep working on an old Marklin HO breakdown crane. I used the tweezers and the partially round awl (great as a marlinspike) to carefully pick a knot in the winch line, and then the tweezers again pull the winch line from the crank, then remove the rubber coating from a paper clip with the scraper on the bottle opener, so that it could be cut and shaped into a new pin to hold a piece.
<a href="https://flic.kr/p/DrH2h9" target="_blank" rel="noopener noreferrer"><img src="https://farm5.staticflickr.com/4575/24576116708_6e85b66e6c_c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Photo0807 by cody6268, on Flickr
<a href="https://flic.kr/p/GCQLTz" target="_blank" rel="noopener noreferrer"><img src="https://farm5.staticflickr.com/4536/26671180959_eced019c17_c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Photo0808 by cody6268, on Flickr
This is why the pin needed to be replaced. The slots on this part fit into the missing pin, and the other end fits into the boom, so that the boom will remain raised at various positions. Now to wait until the part arrives to finish the task.
-
Nice Vic Cody, and good use of it!

-
Think I might need a bigger knife.............
No, it did a great job 🍞 :D


-
I was oiling a sheath and used my Farmer (Farmer Friday!) to pop the lid of my grease can.

For those of you who can get this stuff (Huberd's Shoe Grease), I highly recommend it. It's a mix of Pine Pitch and Beeswax. It makes a great leather protectant and preservative. Apparently pine pitch resists rot and bugs and water. Bees wax...is just great stuff. The only downside is that the pine pitch smells smokey, like barbecue, and using this stuff always makes me feel hungry. Regardless, it works really well. Git some.
-
I was picking up some lumber yesterday and noticed a heavy-duty staple sticking out of the side of one of the pieces. Used my deluxe tinker to pull it out before I hauled it down onto my cart, and saved myself from a nasty gash.
For a while I had been thinking about switching to a smaller SAK without pliers, but this reminded me of just how handy they can be.
-
Nothin' but true.....

But it is good stuff.

-
Lift and cut the plastic safety seal.

-
Package duty

-
Saturday Spartan, doing what a Spartan does...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
