Showcase: Mods to plier-based multitools
-
Last one. ;)
Tool Name: Leatherman LBT (Lunch Box Tool)
Basis: Chassis is Leatherman PST, inside tools are a combination of the Leatherman PST, PST II and Flair
**Aim: ** To build a Leatherman that I can prepare and eat lunch with.
**Mods: ** I added a pate knife and a cocktail fork from a Flair into a PST chassis to eat lunch with. Added the PST blade to prepare lunch with and then filled the gaps with a scissors, can opener and some screw drivers.
**Links: ** /post/683928Cheers, Pete
-
Nice, thanks Pete

-
Nice ones Pete !

-
Tool Name: Leatherman Rebar / Diamond file mod
Basis: Chassis is Leatherman Rebar, file from a LM Wave or PST II
Aim: To add a Diamond file to the Rebar
Mods: Use a Wave file and re-profile to fit Rebar later tried a PST file as proof of concept
Links:/post/1309095
DSC09262_zpsubsxdi0b by SteveC, on Flickr

PST II file
DSC09622_zpsjbsejimp by SteveC, on Flickr
DSC09630_zps34macmvk by SteveC, on Flickr -
Excellent mods! Would like to see even more of them

-
Great idea for a thread DT

So many great mods so far

I will try and add to this one as well and would love to see even more members do the same

-
@SteveC said:
Tool Name: Leatherman Rebar / Diamond file mod
Basis: Chassis is Leatherman Rebar, file from a LM Wave or PST II
Aim: To add a Diamond file to the Rebar
Mods: Use a Wave file and re-profile to fit Rebar later tried a PST file as proof of concept
Links:/post/1309095
DSC09262_zpsubsxdi0b by SteveC, on Flickr

...
Now that is one great mod I might try to adopt too for my Rebar - I checked but the ST 300 file I have lying about is not diamond and that would be an excellent addition. Thanks Steve for the detailed pics

OneTwoThree questions - what did you use on the hard file material? Would a diamond cutting disk on a Dremel work? Did you add a nail nick or could you access the existing one well?Thanks for the encouragement Ponch
Am I right in guessing the Wave file above has found its way into your Rebar? -
Tool Name: Learherman Surge R (acronym for Ruggedised)
Basis: Leatherman Surge
Aim: Ruggedise the Surge by replacing the versatile, but fiddly and loss-prone, bit driver. I see the Surge R as my tool for situations in which I don't care about the street legality of my carry - in my garden, or at Armageddon. In both cases it must be as rugged as possible. I can still attach a removable bit driver to the fixed Phillips anyway if versatility is called for.
Mods: Took out the bit driver and replaced it with the leftover Phillips from the ST 300 VX (see above). To make the tool close properly I did have to break off the plier head rest tab in the handle. Note this requires utmost care lest you lose spring tension, as the lock spring is actually the same piece of metal as the tab.
Links: /post/1575142, /post/1575357
-
@Dutch_Tooler said:
Now that is one great mod I might try to adopt too for my Rebar - I checked but the ST 300 file I have lying about is not diamond and that would be an excellent addition. Thanks Steve for the detailed pics
OneTwoThree questions - what did you use on the hard file material? Would a diamond cutting disk on a Dremel work? Did you add a nail nick or could you access the existing one well?I have done some mods with the diamond files. I don't think a diamond cutting disk is necessary... I'm pretty sure I used one of the standard metal cutting discs with my Dremel. I can double check at home tonight.



great idea for a thread, DT!
I can dig up some of my old mod threads if anyone is interested. 
-
Thanks, and yes please, the more mods the merrier :D :D
-
I'd be happy to... especially seeing as mods are what got me started here in the first place. :D
-
Tool Name: Mini Surge or ReCharge
Basis: Leatherman Wave or Charge, with parts from the Rebar and Wingman
Aim: to incorporate the Rebar plier head with replaceable cutters into the Wave/Charge platform, and give people exactly the tool loadout they want on a Wave (or Charge) :D
Mods: This mod can be done with either the Wave or the Charge as the main chassis of the tool; I have done both, but most people seem to prefer the Wave. The Mini Surge mod linked below is one that I did for Kampfer, and to give credit where credit is due, he is the one who came up with the "Mini Surge" name for the tool. I have done so many of these mods that I lost count somewhere along the way, but there are plenty of different combinations of tools that can be used with this mod. The pictures below are of Kampfer's Mini Surge (and the "Spare Parts" Rebar), plus a ReCharge mod that I did for someone else.
Links: Kampfer's Mini Surge

-
Tool Name: Skinny Charge
Basis: Leatherman Charge ALX, with parts from the Rebar and Wingman
Aim: to create a slimmer version of the Charge
Mods: I did this mod for myself after becoming frustrated in the lab at work and not being able to find the tools I needed. ;) I normally EDC a Skeletool CX, so I wanted a slimmer version of the Charge with the tool loadout optimized for what I need in the lab on a regular basis. Thinned out the chassis and removed two of the external tools and added Wingman scissors. Kept the original internal tool loadout, but changed the bits in the bit driver. Added the Rebar plier head as well.
Links: Breezy's Skinny Charge

-
Tool Name: Mini Surge 2.0
Basis: Leatherman Wave, with parts from the Rebar and Surge, along with Vic 91mm scissors
Aim: to fit the Surge Blade Exchanger onto a Wave chassis
Mods: I took the original Mini Surge mod a step further buy adding a cutout in the Wave handle to accommodate the blade exchanger from a Surge. I used Vic 91mm scissors on this one instead of the Wingman scissors.
Links: Mini Surge 2.0

-
Beautiful mods Breezy, thanks for sharing summaries and pics
(had seen one or two before)

Sent on my SM-G930F with Tapatalk
-
@Dutch_Tooler said:
Beautiful mods Breezy, thanks for sharing summaries and pics
(had seen one or two before)

Sent on my SM-G930F with Tapatalk
+1 Lot of excellent work Breezy
Again this is an awesome thread DT
and yes that might be my diamond file in one of my Rebar's now
:D -
Beautiful mods Breezy, thanks for sharing summaries and pics
(had seen one or two before)

+1 Lot of excellent work Breezy
Again this is an awesome thread DT
and yes that might be my diamond file in one of my Rebar's now
:Dthanks guys

I also have a knifeless Squirt mod that I'd like to add here, but I can't find any pictures of it at the moment. :-[ I've also done a couple simpler mods with the Style CS/PS platform that are a little more user friendly. I'll try to get some pics uploaded soon and post some details to go with them.

There's also plenty of fun to be had with cerakote... but I didn't think those deserved their own post in this thread, so I'll sneak in a picture here. ;)

-
**Tool Name: **keywave? Lol
**Basis: **Leatherman Wave
**Aim: **Fitting my personal needs more
**Mods: **Typical rebar pliers head and awl mod. Scissors modded to fit with the rebar pliers. Two keys added externally, one on top, one on bottom. Surge blade exchanger added. Retained the original large bit holder, small bit holder, and dedicated flat.
**Links: **/topic/74521


-
Tool Name: Leatherman Rebar / Diamond file mod
Basis: Chassis is Leatherman Rebar, file from a LM Wave or PST II
Aim: To add a Diamond file to the Rebar
Mods: Use a Wave file and re-profile to fit Rebar later tried a PST file as proof of concept
Links:/post/1309095Spoiler:
DSC09262_zpsubsxdi0b by SteveC, on Flickr

...
Now that is one great mod I might try to adopt too for my Rebar - I checked but the ST 300 file I have lying about is not diamond and that would be an excellent addition. Thanks Steve for the detailed pics

OneTwoThree questions - what did you use on the hard file material? Would a diamond cutting disk on a Dremel work? Did you add a nail nick or could you access the existing one well?Thanks for the encouragement Ponch
Am I right in guessing the Wave file above has found its way into your Rebar?I used the regular Dremel cutoff disks, the non reinforced ones. No nail nick needed.
Great thread idea BTW

-
Thanks Steve

@386greene said:
**Tool Name: **keywave? Lol
**Basis: **Leatherman Wave
**Aim: **Fitting my personal needs more
**Mods: **Typical rebar pliers head and awl mod. Scissors modded to fit with the rebar pliers. Two keys added externally, one on top, one on bottom. Surge blade exchanger added. Retained the original large bit holder, small bit holder, and dedicated flat.
**Links: **/topic/74521Just had a detailed look at the pics, very nicely done 386greene - thanks for sharing
! What did you use to cut off the shield - Dremel?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login