Showcase: Mods to plier-based multitools
-
Tool Name: Mini Surge 2.0
Basis: Leatherman Wave, with parts from the Rebar and Surge, along with Vic 91mm scissors
Aim: to fit the Surge Blade Exchanger onto a Wave chassis
Mods: I took the original Mini Surge mod a step further buy adding a cutout in the Wave handle to accommodate the blade exchanger from a Surge. I used Vic 91mm scissors on this one instead of the Wingman scissors.
Links: Mini Surge 2.0

-
Beautiful mods Breezy, thanks for sharing summaries and pics
(had seen one or two before)

Sent on my SM-G930F with Tapatalk
-
@Dutch_Tooler said:
Beautiful mods Breezy, thanks for sharing summaries and pics
(had seen one or two before)

Sent on my SM-G930F with Tapatalk
+1 Lot of excellent work Breezy
Again this is an awesome thread DT
and yes that might be my diamond file in one of my Rebar's now
:D -
Beautiful mods Breezy, thanks for sharing summaries and pics
(had seen one or two before)

+1 Lot of excellent work Breezy
Again this is an awesome thread DT
and yes that might be my diamond file in one of my Rebar's now
:Dthanks guys

I also have a knifeless Squirt mod that I'd like to add here, but I can't find any pictures of it at the moment. :-[ I've also done a couple simpler mods with the Style CS/PS platform that are a little more user friendly. I'll try to get some pics uploaded soon and post some details to go with them.

There's also plenty of fun to be had with cerakote... but I didn't think those deserved their own post in this thread, so I'll sneak in a picture here. ;)

-
**Tool Name: **keywave? Lol
**Basis: **Leatherman Wave
**Aim: **Fitting my personal needs more
**Mods: **Typical rebar pliers head and awl mod. Scissors modded to fit with the rebar pliers. Two keys added externally, one on top, one on bottom. Surge blade exchanger added. Retained the original large bit holder, small bit holder, and dedicated flat.
**Links: **/topic/74521


-
Tool Name: Leatherman Rebar / Diamond file mod
Basis: Chassis is Leatherman Rebar, file from a LM Wave or PST II
Aim: To add a Diamond file to the Rebar
Mods: Use a Wave file and re-profile to fit Rebar later tried a PST file as proof of concept
Links:/post/1309095Spoiler:
DSC09262_zpsubsxdi0b by SteveC, on Flickr

...
Now that is one great mod I might try to adopt too for my Rebar - I checked but the ST 300 file I have lying about is not diamond and that would be an excellent addition. Thanks Steve for the detailed pics

OneTwoThree questions - what did you use on the hard file material? Would a diamond cutting disk on a Dremel work? Did you add a nail nick or could you access the existing one well?Thanks for the encouragement Ponch
Am I right in guessing the Wave file above has found its way into your Rebar?I used the regular Dremel cutoff disks, the non reinforced ones. No nail nick needed.
Great thread idea BTW

-
Thanks Steve

@386greene said:
**Tool Name: **keywave? Lol
**Basis: **Leatherman Wave
**Aim: **Fitting my personal needs more
**Mods: **Typical rebar pliers head and awl mod. Scissors modded to fit with the rebar pliers. Two keys added externally, one on top, one on bottom. Surge blade exchanger added. Retained the original large bit holder, small bit holder, and dedicated flat.
**Links: **/topic/74521Just had a detailed look at the pics, very nicely done 386greene - thanks for sharing
! What did you use to cut off the shield - Dremel? -
@Dutch_Tooler said:
Thanks Steve
**Tool Name: **keywave? Lol
**Basis: **Leatherman Wave
**Aim: **Fitting my personal needs more
**Mods: **Typical rebar pliers head and awl mod. Scissors modded to fit with the rebar pliers. Two keys added externally, one on top, one on bottom. Surge blade exchanger added. Retained the original large bit holder, small bit holder, and dedicated flat.
**Links: **/topic/74521Just had a detailed look at the pics, very nicely done 386greene - thanks for sharing
! What did you use to cut off the shield - Dremel?Mainly a Dremel, but I also used my bench top belt sander (not safe at all!)
-
Tool Name: Rebar 2
Basis: Leatherman Rebar
Aim: To make the Rebar better suit my day to day life
Mods: Added scissors in, a diamond file to replace the regular file and sharpened the can opener to to a package opener
EDIT: I also added the pivot of a LM Kick so I could have a pocket clip option if I wanted
Links: /topic/67409 Stupid Photobucket
1121170719a~2 by Poncho 65, on Flickr
1121170719 by Poncho 65, on Flickr
1121170716a by Poncho 65, on Flickr -
Here's my Rebar II mod thread

/post/1033900

-
@SteveC said:
Here's my Rebar II mod thread
/post/1033900

Thanks Steve. I detect an ever-so-slight similarity to Ponch's Rebar 2 (apart from the diamond file refinement)... Given the timeline, yours must have been the earlier (or original)?

About thinning the can opener - about how much did you need to take off? -
Steve's predates mine
I also had a couple other peoples Rebars to go by as well

-
Here's my Rebar II mod thread

/post/1033900

Thanks Steve. I detect an ever-so-slight similarity to Ponch's Rebar 2 (apart from the diamond file refinement)... Given the timeline, yours must have been the earlier (or original)?

About thinning the can opener - about how much did you need to take off?I definitely wasn't the first to put scissors in the Rebar

I didn't measure how much I took off but it wasn't a lot 1/32" or less. -
I stuffed a ton of things into a juice..

-
Very nice, thanks for sharing!

Would you care to add a few details as per original post? It would be especially interesting to know where you got extraneous items from and what you had to do to them to make them fit.
-
@Dutch_Tooler said:
Very nice, thanks for sharing!
Would you care to add a few details as per original post? It would be especially interesting to know where you got extraneous items from and what you had to do to them to make them fit.
sorry I missed the first post.. I will start again. -
@Sam Lim said:
I stuffed a ton of things into a juice..
you sure got all the Juice out of the tool with those mods!

Hey that gives me a name. I am going to call her "juicy".
-
Tool Name: Juicy
Basis: Leatherman Juice CS4
Aim: Basically to squeeze in as much functional tools as possible.
Mods: Original scales and rivets were removed. Knife blade shortened to accommodate the larger flathead as a pry tool in the same tool bay. A selection of rather random tools from some micra knockoffs. Only acceptable quality tools were picked. All tools have their individual lock bar to hold them in place. Currently using screw (M3) and nuts, its a little undersized but it hasn’t cause any problems yet. Non generic tools added- Eye glass screw drivers ( both flathead and Philips ), sim card extraction tool, nail file, mini pry tool, No.1 philips screw driver, cap lifter and awl combi tool, tweezer.
Links: </topic/73731
-
@Sam Lim said:
Tool Name: Juicy
Basis: Leatherman Juice CS4
Aim: Basically to squeeze in as much functional tools as possible.
Mods: Original scales and rivets were removed. Knife blade shorted to accommodate the larger flathead as a prytool in the same tool bay. A selection of rather random tools from some micra knockoffs. Only acceptable quality tools were picked. All tools have their individual lock bar to hold them in place. Currently using screw (M4) and nuts, its a little undersized but it hasn’t cause any problems yet. Non generic tools added- Eye glass screw drivers ( both flathead and Philips ), sim card extraction tool, nail file, mini pry tool, No.1 philips screw driver, cap lifter and awl combi tool, tweezer.
Links: /topic/73731
Wow... thanks Sam, much appreciated!
Sent on my SM-G930F with Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login