And so it begins.... (My adventures into Alox!)
-
-
Do you think it´s possible to develop one that doesn´t need scale cutouts?
-
@Ronald Schröder said:
Do you think it´s possible to develop one that doesn´t need scale cutouts?Yes this one. It's a drop in replacement for the wood saw
-
That is so cool! You could potentially use the same brass mechanism for other TI tools...
Nice design work. -
-
Good stuff, awesome.

-
Syph, couldn't you just carbidize the Ti tool in the area where it will rub against the steel? Like you do to the scales at the rubbing points?
-
@tankerG said:
Syph, couldn't you just carbidize the Ti tool in the area where it will rub against the steel? Like you do to the scales at the rubbing points?Tried that, and didnt work. Alot more pressure with a backspring compared to the side contact of the scales. That solution has been working perfectly though for Ti liners and scales.
-
I don't think I ever showed this.
This is my low tech yet very precise method for sizing pivots. A machined series of holes of incrementally increasing depth and a jewelers saw with a tiny 0.010" kerf. Been doing it this way for years now. The Platinum series blades from Ottofrei will cut hardened steel and Ti with ease. In the old days I used to actually hand cut liners and scales out of Ti with these same blades.

-
Syph, couldn't you just carbidize the Ti tool in the area where it will rub against the steel? Like you do to the scales at the rubbing points?
Tried that, and didnt work. Alot more pressure with a backspring compared to the side contact of the scales. That solution has been working perfectly though for Ti liners and scales.
I was also wondering, because titanium will polish to a mirror finish, if it would still gall with polished stainless under pressure?
I'm betting you have already tried this too... ;)
-
I have also noticed when using all stainless hardware, nuts and bolts mostly for high corrosion applications or decorative purposes, that the stainless will gall with itself a lot. I nearly always use anti-seize for that, but it's usually (hopefully) a one time assembly, and not a constant movement situation. It really is an annoying thing with stainless, and anti-seize is a messy business also. Not really a problem when it's highly polished, like on a SAK...
-
Syph, couldn't you just carbidize the Ti tool in the area where it will rub against the steel? Like you do to the scales at the rubbing points?
Tried that, and didnt work. Alot more pressure with a backspring compared to the side contact of the scales. That solution has been working perfectly though for Ti liners and scales.
I was also wondering, because titanium will polish to a mirror finish, if it would still gall with polished stainless under pressure?
I'm betting you have already tried this too... ;)
The more polished the worse the gall. Actually even with stainless above 220 grit will gall with other stainless. This takes about 5 minutes of effort to combine the brass and Ti parts easy soultion now that I got the g code worked out. I made half a dozen and putting a test one together now.
-
Nice, waiting for the prototype...

Also waiting for your custom damascus phase.
:D -
He has been talking about a marlin spike for a while - But this does not look like that
Is it something internal to do with the construction process ??? Not sure where that wee device would fit in a SAKDing ding!
People keep asking for the Marlin spikes. I work with Ti as steel needs heat treating and is a pain to machine. A Ti tool on steel backsprings galls so bad it feels like there is sand in the joint.
So this little gismo let's me use Ti material and solves the gall problem! The action is smooth as silk! ....And my prize for the correct guess is ........
A custom Syph SAK with a ..... marlin spike !! :D
;) -
That is a sweet fix for that type of problem Syph

-
Tumbled and textured Ti 93. Its been awhile but I still remembered all the tricks to put one together. :D
-
-
Bladeless!
Was a swiss champ and lost mag layer and main blade layer. I shaved down the tang of the corkscrew just a tad so it could fit on the back of the metal saw layer.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

