The Hacked Leatherman Owners Club.
-
@5hif7y said:
another club to join :D


@Poncho65 said:
1124171433a by Poncho 65, on Flickr
1124171432 by Poncho 65, on Flickr
You two are gonna cost me.

-
@Poncho65 said:
1127171424a~2 by Poncho 65, on Flickr
1127171426~2 by Poncho 65, on Flickr
1127171423_Burst01~2 by Poncho 65, on FlickrSome damn good pic you took there Poncho

-
Thanks very much 5hif7y
I love the color swap on these and NOW I am wondering how it would look on an OG Supertool, a :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh and a PST 
:D :D
-
1128171244a~2 by Poncho 65, on Flickr -
-
Thanks DT

-
Color Swapped 300

1130171021a~2 by Poncho 65, on Flickr -
Nice

Meanwhile, in D_T's basement...

Sent on my SM-G930F with Tapatalk
-
-
Just a question to those who have fitted a Rebar pliers head in a Wave or Charge: is this (always) a straight drop in?
I'm considering upgrading the Wave R but I'm a tad worried that the Rebar head might require more space and that the painstaking mods I applied to the handle tools will have to be done all over again

Thanks in advance

-
I am thinking that the pins that are head rests in the Wave/Charge are in the way for the Rebar plier head (it is a bit wider) and it doesn't require them being in there for it to close correctly
So you will have to do away with them to make the Rebar head work but not sure that you will be able to go back to the regular plier head after removing said pins 
I have never done this mod myself so this is only here say and I may be wrong though
:D

-
Straight drop in... but scissor prevents full closed position...
My approach was to cut down the the scissors...

Another approach was to grind down a bit the part of the plier head which hits the scissors...
A friend of mine removed the scissor altogether...
Sent from my iPhone using Tapatalk
-
Thanks for chiming in jaya
Grinding on the scissors would be way easier to go back to the other plier head if you wanted

-
Thanks chaps
.My Wave R no longer has scissors and the plier head rest tabs had to be removed already to make way for the fixed Phillips, the small fixed screwdriver and the awl... judging by what you guys are telling me, I fear that these tools might be in the way of the Rebar plier head...

Sent on my SM-G930F with Tapatalk
-
One approach is to grind down the internal tools (fixed Phillips, scissors, and awl are the main culprits). This is what I do for the majority of my ReCharge/Mini Surge mods. I'd be happy to show you some before/after pics if you're interested.
Another approach is to grind down the Rebar plier head itself. I have never tried this as I fear it would compromise the strength of the pliers.
A different approach is to completely remove the blade locking pin mechanism from inside the handle (not just breaking off the plier head rests), then re-peening the handle. I believe this allows enough extra space for the tools and the plier head to coexist nicely. :D I haven't tried this approach either, but I'm pretty sure that Dr. Z has done it.
Hope this helps.

-
Thanks Breezy... I think I'll try swapping the heads first, judging by appearances it might just work out without (much) further grinding on the tools- I already did quite a bit of that to make the three new tools fit. Thanks for the tip regarding the blade locks... but I think I'd only consider doing away with that in a real emergency. I had also considered grinding at the pliers head but share your misgivings, especially in view of a fellow member's report on broken pliers...
Sent on my SM-G930F with Tapatalk
-
please keep us posted! :D
just to clarify, the blade locks themselves will still function just fine... what you lose is the pins that prevent the main blades from opening while the pliers are deployed.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

