Finally managed 'shaving sharp'
-
@Lynn LeFey said:
Wohoo!Well, I got three used Campers from the MTO store to stick in survival kits, and managed to get a shaving sharp edge on 5 of the 6 blades. I used a lansky stone, ceramic rods and a leather belt to strop. The blade that isn't shaving sharp is still as sharp as i usually sharpen to, able to cut thin receipt paper.
I'm particularly proud of this because one of the blades had a rolled edge when it arrived.
Congratulations Lynn! Persistence pays off.

-
Big milestone Lynn, you can now bring your blade’s edge to the next level. Very good on you. Might me a little proud even. Ok the sobbing grand father is coming out now...
Well done and feel good about it.
-
Good job !

-
Thanks all.
Rich, I almost never sharpen beyond the point you describe as well, as, like you, I find no practical point to it. This was really a practice of CAN I, not do I need to.
And i use thin receipt paper, instead of phone book, but they're pretty much the same for determining sharpness.The system i use isn't 100% without assistance. The ceramic rods are the kind that stick into a block, and make a V, so the angle of sharpening is kind of predefined, assuming you hold the blade vertical while working. But ALMOST entirely freehand? :D
-
Lynn -
Doesn't really matter how you do it, just as long as you get the edge you want. I've been freehand sharpening all my life (65+). I just have a "thing" about the term "shaving sharp" - IMHO it's overused (especially on other knife forums) and basically meaningless. A) No one actually shaves with a pocket knife that I know of and B) shaving arm hair is much different from beard hair (much coarser). I did try it once though; nearly required plastic cosmetic surgery to fix all the cuts, nicks and skin lost
Fortunately no major blood vessels like the vugular vein were cut. ;)Rich
-
@Rich S said:
Lynn -Doesn't really matter how you do it, just as long as you get the edge you want. I've been freehand sharpening all my life (65+). I just have a "thing" about the term "shaving sharp" - IMHO it's overused (especially on other knife forums) and basically meaningless. A) No one actually shaves with a pocket knife that I know of and B) shaving arm hair is much different from beard hair (much coarser). I did try it once though; nearly required plastic cosmetic surgery to fix all the cuts, nicks and skin lost
Fortunately no major blood vessels like the vugular vein were cut. ;)Rich
I have shaved my face with both a SAK and an opinel in a pinch. Not fun but it worked.
I love my knives being sharp


-
I can sharpen to a good, sharp, working edge. Never to hair popping sharp, but I do love when my blades are that sharp, not because there's any real benefit, it's rather nice cutting something with a blade so sharp it takes almost no effort to do so
-
Great job Lynn.
As a user of the Lansky I can only say using "training wheels" is nothing to be ashamed of. Freehand is great but to me the whole point is getting your knife sharp so its a safe knife. I don't care how you get the blade sharp just get it sharp as you require. Personally I like to take my edges a bit further than most but, but I find the experience relaxing.
-
@Aloha007 said:
Great job Lynn.As a user of the Lansky I can only say using "training wheels" is nothing to be ashamed of. Freehand is great but to me the whole point is getting your knife sharp so its a safe knife. I don't care how you get the blade sharp just get it sharp as you require. Personally I like to take my edges a bit further than most but, but I find the experience relaxing.
+1.... Almost therapeutic
-
Yeah, I think 'therapeutic' is a fair word.
Kind of a zen mindfulness ritual.
-
Great job Lynn.
As a user of the Lansky I can only say using "training wheels" is nothing to be ashamed of. Freehand is great but to me the whole point is getting your knife sharp so its a safe knife. I don't care how you get the blade sharp just get it sharp as you require. Personally I like to take my edges a bit further than most but, but I find the experience relaxing.
+1.... Almost therapeutic
+2
-
Lynn wrote:
"Kind of a zen mindfulness ritual."
Yes, I agree 100%
Rich
-
I get that same feeling every Friday evening, cleaning a week´s worth of dirt off my SAKs.
-
It's a cool skill to have, especially in a survival situation. But like any skill worth having it takes time to learn and even some initial investment in a good sharpening set-up. For sharpening certain knives it's not worth it from an economic standpoint. Is it worth it to spend time sharpening a $10 Mora when I can get a new one that's sharp out of the box, it really isn't worth my time economically.
-
Do you make $ 10 in 5 minutes?
-
I wish i had your job, thats 1200 dollars an hour
-
2.5 million/yr
-
Sendall of the moras you go through to me :D
-
@gdoolittle said:
I wish i had your job, thats 1200 dollars an hourThere are 60 minutes in an hour, divided by 5 minutes equals 12. 12 multiplied by $10 would be $120. So your math is very wrong. It also doesn't take me 5 minutes to sharpen any knife that's really dull and used, this might be due to my lack of skill and easy set-up but again there is a cost factor to acquiring those things. Anytime I've had to sharpen anything that was actually dull it takes closer to half an hour going between the various stages and cleaning. If you're talking about maintenance stropping on a chisel that's already sharp, that's 5 minutes or less. If you have Tormek machine, you're done in seconds/minutes but that cost a lot of Mora knives.
-
@gdoolittle said:
I wish i had your job, thats 1200 dollars an hour
There are 60 minutes in an hour, divided by 5 minutes equals 12. 12 multiplied by $10 would be $120. So your math is very wrong. It also doesn't take me 5 minutes to sharpen any knife that's really dull and used, this might be due to my lack of skill and easy set-up but again there is cost factor to acquiring those things. Anytime I've had to sharpen anything that was actually dull it takes closer to half an hour going between the various stages and cleaning. If you're talking about maintenance stropping on a chisel that's already sharp, that's 5 minutes or less. If you have Tormek machine, you're done in seconds/minutes but that cost a lot of Mora knives.
PI only have to find the stone. For me, touch up sharpening every week suffices to not let the knife get dull, ever.
BTW Hair shaving sharp doesn´t make sense to me. It won´t last more than a few cardboard boxes. I sharpen my knives enough that they´ll be usable with little effort.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login