Gerber Mr. Pinchy Multi Plier Club
-
Nice pinchy Alan! Thanks for sharing!

The Multi Plier is true old school multi tool! -
-
The pinchy served me well for over a decade, so I cannot cut it down. But, I don't believe I could use one everyday at work again. The mp600 blunt nose is fantastic as an upgrade though! Right now I carry a LM wave and a blunt nose 600. Very happy with each of them! I do miss the days when I was perfectly in tune with using the pinchy though. Before I started collecting MTs.

The one in the middle was involved with hundreds of thousands of dollars of repairs through my employers (I didn't get a lot of that money, but my bosses were happy).

-
Messing around with Pinchy.

-
Version 1 has arrived. A beautifully polished MT. All tool are butter smooth to open. The quality exceeds that of my v.2, v. 3, and v.4. A very pleasant surprise! The scissors are pretty lame though. It really has a 'hand crafted' excellence about it.





-
@gerleatherberman said:
Version 1 has arrived. A beautifully polished MT. All tool are butter smooth to open. The quality exceeds that of my v.2, v. 3, and v.4. A very pleasant surprise! The scissors are pretty lame though. It really has a 'hand crafted' excellence about it.
it's one of those "the first ones, the good oldies, were the best"

-
@gerleatherberman said:
Version 1 has arrived. A beautifully polished MT. All tool are butter smooth to open. The quality exceeds that of my v.2, v. 3, and v.4. A very pleasant surprise! The scissors are pretty lame though. It really has a 'hand crafted' excellence about it.
Nice one

Unless my eyes are deceiving me it looks has even had one of the the running improvements they made to the V1s as they went - a nail nick on a blade that actually lines up with the cutout in the handle (the very early V1s didn't)

But nobody can convince me that that that enormously thick lanyard ring isn't also serving duty as a spacer. I reckon they could have added at least 3 more (admittedly very short) tools in that width.
-
Version 1 has arrived. A beautifully polished MT. All tool are butter smooth to open. The quality exceeds that of my v.2, v. 3, and v.4. A very pleasant surprise! The scissors are pretty lame though. It really has a 'hand crafted' excellence about it.

Nice one

Unless my eyes are deceiving me it looks has even had one of the the running improvements they made to the V1s as they went - a nail nick on a blade that actually lines up with the cutout in the handle (the very early V1s didn't)

But nobody can convince me that that that enormously thick lanyard ring isn't also serving duty as a spacer. I reckon they could have added at least 3 more (admittedly very short) tools in that width.
Thank you!

Indeed the nick lines up! And the lanyard ring is absurd, but the quality of the MT overall probably took most of the budget. For the money they used on the lame scissors, they could have filled most of that jumbo lanyard loop with more implements for sure.
-
Version 3 hanging around.


-
Multi-Plier family.

-
Even Mr. Pinchy needs some holiday spirit!
MTs at Christmas by None, on Flickr -
@gerleatherberman said:
Even Mr. Pinchy needs some holiday spirit!
MTs at Christmas by None, on Flickrgood one!

-
Much appreciated!

-
Infamously bad Version 1 Multi Plier Scissors. They work on copy paper...sometimes.


-
@gerleatherberman said:
Infamously bad Version 1 Multi Plier Scissors. They work on copy paper...sometimes.
inspired by Lynn's scissors thread?
I sure like the MP series' scissors, but never tried the ones in an old Mr.Pinchy!
-
Infamously bad Version 1 Multi Plier Scissors. They work on copy paper...sometimes.

inspired by Lynn's scissors thread?
I sure like the MP series' scissors, but never tried the ones in an old Mr.Pinchy!
Indeed.

The shame of it is that the scissors have a decent grind on the cutter portion, but the geometry of cutting causes them to open apart when in use. I tightened the screw on the scissors pivot, but the same issue is there. If the version 1 wasn't a shelf queen, I am certain the pivot screw could be removed and the scissor blades bent slightly to make them more usable. -
Recently got one that in very good condition.. Almost new. But but but.... How do you use these things...? It's like zero handle splay.. I am sure everyone that uses these gets pinch in the palm/fingers and it's no joke... It's built like a tank.... Btw, I notice there's these 2 holes on both sides of the pliers pivot. Are they adjustable? Mine is kinda too tight to be usable.
-
@Sam Lim said:
Recently got one that in very good condition.. Almost new. But but but.... How do you use these things...? It's like zero handle splay.. I am sure everyone that uses these gets pinch in the palm/fingers and it's no joke... It's built like a tank.... Btw, I notice there's these 2 holes on both sides of the pliers pivot. Are they adjustable? Mine is kinda too tight to be usable.And that's why we call them the infamous Mr. Pinchy.

Post a pic and I may be able to help you with the issue at hand. I used one for over ten years! There are three different pivot types. Only one that is an issue is the pliers that slide on rivets instead of screws. If it is a rivet type, then some good silicone oil and a few hours of open/closing may work. If the sliding mechanism has screws, then we're going to get that pinchy working like butter!
If it has the two little holes on each side of the plier pivot, then it is an earlier one with the best pivot and can be adjusted. The four screws that slide the pliers out can be removed for easy adjustment.I found ways to avoid getting pinched a lot. Best thing it to look closely at what you will be using them on and think about where your palm is when squeezing.
-
And avoid cutting anything hard with the wire cutters. When it goes through, the handles close up very rapidly indeed, and hey presto, instant blood blister on your palm !
:ahhh -
@gregozedobe said:
And avoid cutting anything hard with the wire cutters. When it goes through, the handles close up very rapidly indeed, and hey presto, instant blood blister on your palm !
:ahhhIndeed! Those are the best blisters.

When possible cutting hard wire, place 1/2 pinchy handle on hard surface and push down other handle. If no way to push with a hard surface, a piece of plastic sheet or cardboard can be used between your palm and the pinch zone.
I used mine for lamp repair half the time I carried it, so I had systems in place to avoid he pinch.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better π
Register Login