Too Sharp?
-
I've tried polished edges, it does make the edge look shinny 8) but I gave it up pretty quick. The edge didn't seem to hold up as well for cardboard, wood, zip ties or other hard or abrasive cuts.
Steels like AUS-8, 1095 get done with a 320 or 600 grit aluminum oxide stone.
For higher carbide steels like 154CM & D2 I use a 600 silicon carbide stone.
High carbide, vanadium steels like S30V & M390 get special attention. I relieve the edge to 17 per side then a 20 micro bevel with a 1500 diamond plate. -
I just keep mine sharp enough to cut hot butter.
-
@OldBoy2016 said:
That was a crazy pic by the way, what was that smoky S? Blowing cigar smoke? 👌that's a whittled hair (meaning the edge that did that was so sharp to take shaves off a single human hair)

Extreme sharpness :ahhh -
That was a crazy pic by the way, what was that smoky S? Blowing cigar smoke? 👌
that's a whittled hair (meaning the edge that did that was so sharp to take shaves off a single human hair)

Extreme sharpness :ahhhMad skills!
-
@Dean51 said:
I've tried polished edges, it does make the edge look shinny 8) but I gave it up pretty quick. The edge didn't seem to hold up as well for cardboard, wood, zip ties or other hard or abrasive cuts.Yeah that’s what was stopping me from doing this before. Nice to know there are real world experiences in this. I guess I’ll see what happens with my Cold Steel. Hopefully the edge won’t roll too bad.
-
That was a crazy pic by the way, what was that smoky S? Blowing cigar smoke? 👌
that's a whittled hair (meaning the edge that did that was so sharp to take shaves off a single human hair)

Extreme sharpness :ahhhMad skills!
I would have thought that you would need an obsidian scalpel and microscope to do that. :ahhh
Mad skills doesn't do it justice. 8) -
Having an edge like that is really fun and great for detail work but not so good if you slip and cut yourself :ahhh
-
My benchmark is to smoothly and slowly push cut receipt paper. If it can do that it can slice through food packaging without ripping it.
-
I've tried polished edges, it does make the edge look shinny 8) but I gave it up pretty quick. The edge didn't seem to hold up as well for cardboard, wood, zip ties or other hard or abrasive cuts.
Yeah that’s what was stopping me from doing this before. Nice to know there are real world experiences in this. I guess I’ll see what happens with my Cold Steel. Hopefully the edge won’t roll too bad.
A polished edge should not roll any more than a toothier edge at the same angle.
If you make the edge angle too acute then steels like AUS-8 will roll and steels like S30V will micro chip. -
I've tried polished edges, it does make the edge look shinny 8) but I gave it up pretty quick. The edge didn't seem to hold up as well for cardboard, wood, zip ties or other hard or abrasive cuts.
Yeah that’s what was stopping me from doing this before. Nice to know there are real world experiences in this. I guess I’ll see what happens with my Cold Steel. Hopefully the edge won’t roll too bad.
A polished edge should not roll any more than a toothier edge at the same angle.
If you make the edge angle too acute then steels like AUS-8 will roll and steels like S30V will micro chip.Good to know!!!
-
@pomsbz said:
My benchmark is to smoothly and slowly push cut receipt paper. If it can do that it can slice through food packaging without ripping it.Don’t laugh, but I rushed over to the kitchen to look for receipts. Lol.
Looks good! I wish I have access to a better camera and show some pics.
I have noticed that I could never get the edge next to the heel as sharp as the belly edge as the American Lawman doesn’t have a sharpening notch.
So when I slice something from beginning to end it’s always a bit tougher at first then smooths out at the end.
At this sharpening rate though eventually that heel will eventually disappear. My only niggling complaint on this wonderful knife.
As a side note when they came out with the same model but CTS XHP steel I immediately bought it in case my old one gets lost. But after a few days I shelved it. For some reason I really love the AUS 8. Very forgiving when I need to fix the edge.
I notched the blade one time accidentally cutting through some sheeting and cut into a rock. Took me only 10 minutes to fix.
In the Massdrop site I waxed poetically about budget steels and mentioned innocently that the super or high end steels were not as forgiving to sharpen and got slammed on my sharpening skills as a response. Hatahhhs!!!!
Gotta love social media.

-
@Pablo O'Brien said:
Hey, at least you won't feel the cuts due to them being sooo fine. :DMy neighbor and close friend borrowed a kitchen knife from us and when she returned it, placed it on our magnetic knife holder right next to the sharpest polished kitchen knife we own. We then sat down together for a beer when she noticed that the side of her hand was bleeding. She swore that her hand never came in contact with the other knife and from what I saw it didn't look like she did. That gets into the realm of scary sharp :D
-
@Pablo O'Brien said:
Hey, at least you won't feel the cuts due to them being sooo fine. :D
My neighbor and close friend borrowed a kitchen knife from us and when she returned it, placed it on our magnetic knife holder right next to the sharpest polished kitchen knife we own. We then sat down together for a beer when she noticed that the side of her hand was bleeding. She swore that her hand never came in contact with the other knife and from what I saw it didn't look like she did. That gets into the realm of scary sharp :D
has happened me on occasion with factory edged knives from Cold Steel and Spyderco.
Embarrassing but makes you :o at your new acquisition -
So after giving the new edge a test drive I’m thinking of keeping it this way. Biggest reason is that my wife was going through her purse collection 🤣 and I noticed that some of the stuff she was throwing away actually had some nice size clips I can use a carabiners. Nice brass rings too that I can repurpose.
I’m constantly using carabiners for something or the other and the ones she had on her purses were made of sturdier stuff.
Anyway the knife went through leather like cutting mud. Nice!! For sturdier material I noticed that as long as I cut firmly and slowly like popping zip ties the edge seems to hold up. Anything faster or harder seems like the edge needs touch up.
Off topic, but I wish that the crowd in Massdrop is as nice as the folks here. I give Grant and the other moderators kudos for maintaining a kind culture.
Massdrop has some great deals on knives and such but seem to attract trolls and steel snobs. I realize that AUS8 is a budget steel but when done right it has its place.
I never learn, but I’ll leave a comment on budget steels and I get trashed for some reason or the other.I mean I get it, we live in a life of embarrassing riches and better knife steels. But there are a few folks who love the old school back locks and don’t need adamantium claws for EDC 😜
Anyway, sorry for the rant. Thanks everyone for their responses!!
-
@OldBoy2016 said:
So after giving the new edge a test drive I’m thinking of keeping it this way. Biggest reason is that my wife was going through her purse collection 🤣 and I noticed that some of the stuff she was throwing away actually had some nice size clips I can use a carabiners. Nice brass rings too that I can repurpose.I’m constantly using carabiners for something or the other and the ones she had on her purses were made of sturdier stuff.
Anyway the knife went through leather like cutting mud. Nice!! For sturdier material I noticed that as long as I cut firmly and slowly like popping zip ties the edge seems to hold up. Anything faster or harder seems like the edge needs touch up.
Off topic, but I wish that the crowd in Massdrop is as nice as the folks here. I give Grant and the other moderators kudos for maintaining a kind culture.
Massdrop has some great deals on knives and such but seem to attract trolls and steel snobs. I realize that AUS8 is a budget steel but when done right it has its place.
I never learn, but I’ll leave a comment on budget steels and I get trashed for some reason or the other.I mean I get it, we live in a life of embarrassing riches and better knife steels. But there are a few folks who love the old school back locks and don’t need adamantium claws for EDC 😜
Anyway, sorry for the rant. Thanks everyone for their responses!!
AUS8 and 420HC are two of my favorites even after using and owning knives in ELMAX, CTS-XHP, S30V, etc.
in fact AUS8-A is the steel I have more folders with (about 22)
Just too good for everyday use and ease of sharpening
-
My favorite super steel is ordinary Vic steel.

-
So after giving the new edge a test drive I’m thinking of keeping it this way. Biggest reason is that my wife was going through her purse collection 🤣 and I noticed that some of the stuff she was throwing away actually had some nice size clips I can use a carabiners. Nice brass rings too that I can repurpose.
I’m constantly using carabiners for something or the other and the ones she had on her purses were made of sturdier stuff.
Anyway the knife went through leather like cutting mud. Nice!! For sturdier material I noticed that as long as I cut firmly and slowly like popping zip ties the edge seems to hold up. Anything faster or harder seems like the edge needs touch up.
Off topic, but I wish that the crowd in Massdrop is as nice as the folks here. I give Grant and the other moderators kudos for maintaining a kind culture.
Massdrop has some great deals on knives and such but seem to attract trolls and steel snobs. I realize that AUS8 is a budget steel but when done right it has its place.
I never learn, but I’ll leave a comment on budget steels and I get trashed for some reason or the other.I mean I get it, we live in a life of embarrassing riches and better knife steels. But there are a few folks who love the old school back locks and don’t need adamantium claws for EDC 😜
Anyway, sorry for the rant. Thanks everyone for their responses!!
AUS8 and 420HC are two of my favorites even after using and owning knives in ELMAX, CTS-XHP, S30V, etc.
in fact AUS8-A is the steel I have more folders with (about 22)
Just too good for everyday use and ease of sharpening
Thank you Peacant! I really enjoy aus8 and 420hc as well. Anything harder and it seems the blades chip more easily! A lot of people on MT.o trash talk 420hc, but when I hit a staple and roll an edge cutting a box open, it is nice to know I won't be spending all night putting a clean edge back on it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
