Brainstorming - 84mm fieldmaster sak
-
Don't rush it mate. Just don't forget about it either. We are keen for you to succeed

brass rod for 84mm : https://www.conrad.de/de/messing-rund-profil-o-x-l-22-mm-x-500-mm-236163.html
I ended up ordering a cheap, small, modelling hobby ball/pein hammer over ebay.-Tom
Do you have any idea what is the weight of your hammer?

Total weight is 92g. I reckon you could double it without any issues whatsoever. Electrician for scale.

-
Don't rush it mate. Just don't forget about it either. We are keen for you to succeed

brass rod for 84mm : https://www.conrad.de/de/messing-rund-profil-o-x-l-22-mm-x-500-mm-236163.html
I ended up ordering a cheap, small, modelling hobby ball/pein hammer over ebay.-Tom
Do you have any idea what is the weight of your hammer?

Total weight is 92g. I reckon you could double it without any issues whatsoever. Electrician for scale.
I just ordered a 4 oz (that's about 114 g in sane unit system :D) hammer from UK for 12 GBP.

-
4 oz will work fine. I have a 2 and and 8. The 2 is too small for larger pins, but I use it for 58mm modding and its perfect.
-
It seems I missed a rather important detail of sak modding. How the smurf do you drill out the pins without ruining the bushings (is that what they are called? :D)?!

:D
-
By punching a little hole in the centre of the rivet to give the drill bit something to bite on. :D
Another option is to drill/sand out the rivets on one side on a few beater SAKs, and saving the brushings on the other side for reuse. That's how syph does it.
-
@Pablo O'Brien said:
By punching a little hole in the centre of the rivet to give the drill bit something to bite on. :DAnother option is to drill/sand out the rivets on one side on a few beater SAKs, and saving the brushings on the other side for reuse. That's how syph does it.
I didn't want to do that since I wanted to remove the pin, not tighten it even more. I will try that next.

:D
-
@Pablo O'Brien said:
By punching a little hole in the centre of the rivet to give the drill bit something to bite on. :D
Another option is to drill/sand out the rivets on one side on a few beater SAKs, and saving the brushings on the other side for reuse. That's how syph does it.
I didn't want to do that since I wanted to remove the pin, not tighten it even more. I will try that next.

:D
You can see how Gareth does it here:
</topic/9808 -
I managed removed the first pin! :ahhh
:D

-
I've also got this:

-

Can't wait to see what comes next.

-
What happens next :ahhh

-
Well, I'll drill out and remove all the pins from all three donor knives during the weekend now that I have the technique figured out. The hand drill you see in the picture works really well for this kind of stuff. You have so much more control over it compared to dremel drills.

I'll also clean up/polish liners from the two used sak-s. And I hope to also polish the scissors as they are a bit scratched. :D
-
:P
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login