Dollar Tree $1 SAK-knockoff (Lynn's $5 Challenge)
-
@cody6268 said:
A used Classic is around $3, 1-2 layer SAKs not much more, and they'll always be able to be counted on.WAS.
I've been looking hard, and finding a used classic (shipping included) for the $5 challenge is essentially impossible. Shipping's $3 at least these days, on most stuff.
At the gun and knife show I was just at, I didn't see a single classic that wasn't at least $5. And those were pretty banged up ones. But they DO seem to be available at around $6 shipped, in good condition.
However, I CAN seem to find 2-layers 91mm SAKs at around $7 each (including shipping). And that is a pretty killer deal.
-
So your telling me that the one dollar SAK clone is a bad one :D
Interesting

-
Nice review, thanks

Another thing that would've deterred me slightly from investing in anything like this is the almost incredible thinness of the liners, as seen in the pic. I can sympathise with your less than perfect confidence in any parts of this knife being able to deal with any torque - period... -
Ok, this is acceptable for $1.
But, only the time you've spent writing this and testing it out it's probably x10 worth the knife's price.
It reminds me of Cutlerylover's infamous SAK Knockoff video
I've had a coule or three of these. On one, I literally broke the metal scales presing with my index and thumb and pushing them in opposite directions.
on the other, I broke the scissors trying to cut a shoelace,
the saw is the usual "fish scaler" that won't bite or cut anything.and the drivers are always too thick, I also bent irreversibly the flathead and Phillips on two of my knockoffs with minimal force.

As for the blade, well, it's the only part that works for actual cutting, but only brute cutting (cardboard, plastics) without any finesse at all. They also profit from a regrind and thinning in any case, but the material you lose from the stone and the time you spend are usually way worth the knife's price.

And even if it cuts. if you only want a cheap throwaway knife for cutting only (recycling, workbench beater...) then a Box Cutter with replaceable blades, a $1 single blade knife or a paring knife will be tougher, thinner (better cutters) and lighter than this metallic chunk that wants to be everything but achieves nothing. And sometimes cheaper (at this thing's usual selling price)
That's my $0.02 anyway.Even my time reading your (interesting) opinion and thoughts was worht more than $1.09!!! :ahhh
-
@ThePeacent said:
And even if it cuts. if you only want a cheap throwaway knife for cutting only (recycling, workbench beater...) then a Box Cutter with replaceable blades, a $1 single blade knife or a paring knife will be tougher, thinner (better cutters) and lighter than this metallic chunk that wants to be everything but achieves nothing. And sometimes cheaper (at this thing's usual selling price)
That's my $0.02 anyway.Even my time reading your (interesting) opinion and thoughts was worht more than $1.09!!! :ahhh
That's the thing. I have been looking for YEARS now for inexpensive stuff for emergency kits. 'Budget bugout' if you like. There are almost no knives of any quality whatsoever available for $1. None. I've found ONE model (new), and they were comparable in quality to this tool. I HAVE found a couple better quality blades used at $1, but that's SUPER rare.
As for your time reading this being worth more the cost of the tool, well.... yeah, probably. But it's entertainment time, and THAT is time well spent.
Reading about Lynn suffering is HILARIOUS.

-
@Lynn LeFey said:
@cody6268 said:
A used Classic is around $3, 1-2 layer SAKs not much more, and they'll always be able to be counted on.WAS.
I've been looking hard, and finding a used classic (shipping included) for the $5 challenge is essentially impossible. Shipping's $3 at least these days, on most stuff.
At the gun and knife show I was just at, I didn't see a single classic that wasn't at least $5. And those were pretty banged up ones. But they DO seem to be available at around $6 shipped, in good condition.
However, I CAN seem to find 2-layers 91mm SAKs at around $7 each (including shipping). And that is a pretty killer deal.
[free-plug]
I have a huge box of Classics, Esquires and similar knives that I would be willing to include with any store purchase for $3. As you said, they just aren't worth the cost of shipping them nowadays, but if anyone wants to add it to an existing order I'd be happy to do it.
[/free-plug]
Def
-
@Grant Lamontagne said:
@Lynn LeFey said:
@cody6268 said:
A used Classic is around $3, 1-2 layer SAKs not much more, and they'll always be able to be counted on.WAS.
I've been looking hard, and finding a used classic (shipping included) for the $5 challenge is essentially impossible. Shipping's $3 at least these days, on most stuff.
At the gun and knife show I was just at, I didn't see a single classic that wasn't at least $5. And those were pretty banged up ones. But they DO seem to be available at around $6 shipped, in good condition.
However, I CAN seem to find 2-layers 91mm SAKs at around $7 each (including shipping). And that is a pretty killer deal.
[free-plug]
I have a huge box of Classics, Esquires and similar knives that I would be willing to include with any store purchase for $3. As you said, they just aren't worth the cost of shipping them nowadays, but if anyone wants to add it to an existing order I'd be happy to do it.
[/free-plug]
Def
Spaaam! >:( Please mods, remove this as quick as possible.
:P -
I most certainly will take Grant up on that offer at some point in the future. $3 Classics are worth it all day every day. And at the rate I buy other knives from the MTO store, I'll be handing out classics the way I hand out Fauxton lights. Like frickin Oprah. "A classic for you, and a classic for YOU, and a classic for YOU!"

I have legitimately found several deals on ebay where I can certainly beat $5 for a Classic. And if I wanted to get like a HUNDRED of them, I could maybe get down to almost a dollar per. But... I think even I would find a hundred Classics excessive. :D
-
I have Fauxton lights in stock too... :P
https://store.multitool.org/departments/fauxton-light-144.html
Def
-
@Pablo O'Brien said:
@Grant Lamontagne said:
@Lynn LeFey said:
@cody6268 said:
A used Classic is around $3, 1-2 layer SAKs not much more, and they'll always be able to be counted on.WAS.
I've been looking hard, and finding a used classic (shipping included) for the $5 challenge is essentially impossible. Shipping's $3 at least these days, on most stuff.
At the gun and knife show I was just at, I didn't see a single classic that wasn't at least $5. And those were pretty banged up ones. But they DO seem to be available at around $6 shipped, in good condition.
However, I CAN seem to find 2-layers 91mm SAKs at around $7 each (including shipping). And that is a pretty killer deal.
[free-plug]
I have a huge box of Classics, Esquires and similar knives that I would be willing to include with any store purchase for $3. As you said, they just aren't worth the cost of shipping them nowadays, but if anyone wants to add it to an existing order I'd be happy to do it.
[/free-plug]
Def

As requested
-
So I guess you are saying that

:D
-
Nice.

There is an untested function on this MT. It is... sketchy. 'Dangerous' is how I'd describe my feelings on this. The corkscrew on this MT looks like failure waiting to happen. But what kind of crappy tool tester am I if I'm not willing to risk permanent injury for a moderately amusing thread post?
So, I reached deep inside, and mustered the courage to test the corkscrew. And I had some assistance. Say hello to my little friend, Minerva.

The whole time I'm setting up to do this, I'm thinking 'This stupid thing is going to shear off, and I'm going to gash myself in the arm with a jagged piece of metal ,and I'm going to have to go the the ER on Christmas Eve.
Corkscrew: Pass... but it felt SCARY.
-
It's kind of sad that these things are even made... so much time and energy and resources put into making of this quality

-
I never imagined finding the review of a 1$ multitool so interesting!
Now I switch to the challenge and start reading the thread.
-
Damn, I wish I'd read this before Xmas! That woulda solved the whole stocking filler problem in one swoop!
(But then I'd have filled our house with even more junk so maybe it's good I missed it!)
Great and very funny review about one of those tools we've all seen but never had the guts to go anywhere near. Well, most of us. -
@Thunderpants said:
Damn, I wish I'd read this before Xmas! That woulda solved the whole stocking filler problem in one swoop!
(But then I'd have filled our house with even more junk so maybe it's good I missed it!)
Great and very funny review about one of those tools we've all seen but never had the guts to go anywhere near. Well, most of us.I like to say "I waste my money so you don't have to."

In all truth, a site dedicated to multitools ought, I feel, to cover the stuff at the bottom as well as high end stuff.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

