'Ruby' small SAK knockoff (Lynn's $5 MT Challenge)
-
You didn't give Little Caesar enough cuts.
:P -
@Lynn LeFey said:
'An adult actually eats Little Caesars Pizza?' Yes. Stop judging me! :'(
Pizza is pizza. I always keep an open mind.

-
It is surprisingly good pizza for the cost. When you are cheap, like me. :D
But then, that's the opinion of someone who WILLINGLY gets cheap MTs to play around with, so my judgement may be suspect. :D
Right, so on to the REALLY important functions of this thing: Cap Lifter and Can Opener.
Starting with the Can Opener. It works. There are a few tools that I mostly just grade pass/fail. Either it works or it doesn't. Everything else is very minor nuance, because whether I can open a can in 16.6 seconds or if it takes me 45 seconds largely doesn't matter, since i won't be doing a ton of cans at once. As long as it's not painful, and doesn't rim jump, it's a pass.
The 'painful and rim jumping' would be the previous entry in my challenge, the $1 SAK knock-off from Dollar Tree. (link below to that thread)
/topic/75095Nothing really exciting to see here. I know within a few cuts if a can opener works, so did a quarter of the rim of a can of ravioli. It worked fine.

And what about the cap lifter? Well, I've mentioned in other threads, trying to use the cap lifter on the Victorinox Rambler gets harder with each adult beverage consumed. I suspect this one would be the same way. It was a tad finicky on hooking the cap's edge, but did the job opening my barley-based adult beverage.

Yep. So, there we go. More testing to come.
-
I thought I'd test a couple tools working together next. The Awl and Sewing Needle, with light assistance from the Scissors.
The objective was to make an 'emergency repair' to a piece of scrap denim I have. I used dental floss as the cordage, which is a pretty standard hiker trick.
First, I punched pilot holes through both layers of denim with the awl. Easy.

Next, I used the sewing needle, going through the pre-punched holes.

Once done, the remains were snipped off with the scissors (so they can at least cut waxed dental floss, but more on them later).
Jeans repaired, and minty fresh! :D
I have to make a confession, now. I think I've been stupid in the past, loathing the sewing needle on the cheap SAK-knockoffs because they are next to impossible to punch through thick material like denim. It only occurred to me today to make pilot holes with the awl. So (or, 'sew') that's how it's done, folks.
Awl for punching heavy cloth: Pass
Needle for emergency repairs with dental floss: Pass -
Scissors.
For those who've never read any of my stuff, I kind of made a rating system for multitool scissors. Here's the thread.
https://forum.multitool.o...ex.php/topic,36798.0.htmlHere's a summary of the scale:"The materials tested were paper, corrugated cardboard, T-shirt, The seam portion of old khakis (4 layers thick), suede leather, PETE plastic bottle (as a stand-in for blister packaging), Cardboard box (non-corrugated), heavy gauge screw-on plastic lid (from a container of ‘country time lemonade’, about 1mm thick), and 550 paracord. I scored these in one of 4 caregories: Fail (-1), Barely Adequate (+0), Pass (+1), Pass with distinction (+2)"
So, the scissors pass Paper, PETE plastic, non-corrugated Cardboard, and T-shirt. Barely adequate for Corrugated Cardboard, 550 paracord. Failed Khaki, Suede, and Heavy Plastic.
Total score: +1This puts them about where I expect scissors to be on tools that aren't from Vic, Leatherman, or Gerber. I don't think I've encountered many scissors that were much better in less well known brands. There might be a few exceptions.
So, they're ok. Particularly when you consider the size of the tool. What might reasonably be asked of it. For day to day tasks, snipping threads, cutting paper, and cutting those stupid plastic pricetag fasteners... yeah, right there. You need any serious work done, like cutting the leg off a pair of pants, and I'd say switch to the blade.

-
The.. saw.

I've... I've tested saws on SAK-knockoffs before. I have never exactly been... 'impressed'. Here was my first test.
</topic/37422The forum member Jothra once described SAK-knockoff saws thusly: "It is only marginally better at cutting wood than the knife's fish scaler, which in turn is only slightly better at cutting wood than the knife's corkscrew. I have seen sharper cheeses."
</post/686191>Another issue. The nail nick on the tool is completely obscured by the fish scaler. I had to pull the tweezers from the scale and pry the fish scaler out of the way before I could open the saw. Ergo fail.
Okay. Well... let's do this.
The best and only thing I can think of near to analogous to this tool would be an 85mm Wenger. Like this...

That stick they're about to cut through is Ash. And it's been well aged. That is serious wood. I have repeatedly seen SAK-knockoff saw dull completely before finishing half that thickness. So, this should be 'fun'.
Up first, for the benchmark, Wenger.

Yeah, no problem. Time on the stopwatch, 2:09. The stick broke when there was about 1/8 of the thickness left. But otherwise, good.
And the competition which I'm sure will...

WHHHHaaaaaa...? What just HAPPENED? :ahhh
It... :o
IT CUT THE WOOD!
Time on the stopwatch was 2:57, but still, it cut, and it didn't feel dead-dull afterward. I am not sure if I have ever been so shocked from any test on any multitool I have ever done. This is just crazy.
Saw for light cutting tasks: Pass (yeah, I'm shocked, too)
Just note, that was ONE cut. It might not last lots longer.
-
More great pics and a great write up as well Lynn
I also like Lil Caesars pizza
Cheap pizza is still good pizza :DAlmost wished Vic made a similar sized SAK with that toolset

-
I am amazed at how tiny that thing is, and even more so now that I see how well the saw works. I have always felt that there is no substitution for length when it comes to saws, so I am impressed to see such a tiny saw perform so well.
Def
-
Exactly. I was certain it was both going to be garbage for cutting, and completely suck due to its length. Considering it took 150% the amount of time as the Wenger, and the length difference, I'd call that pretty impressive.
Yeah, stacking it against a Wenger 85mm really puts it into perspective, huh?
As a side note in this regard. 'Ruby' slips nicely into a coin pocket in jeans. Carry win!
-
I have always talked about how much the Wenger saw is excellent, but usually because it is available on 120mm models, giving the greatest draw length. Yes it's a good saw on its own but the length was what made it really great.
To see a teeny saw on such a cheapo perform that well is excellent. I guess it is time to liquidate all of my more expensive tools and replace them with cheapo instead!
Def
-
I'm going to recommend against that. But if you DO want to liquidate... let me see the list. :D
-
We have come to that most dreaded moment, where I have to talk about the... (sigh)... the fish scaler.
I don't scale fish. Ever. If I did, I don't think I'd use a fish scaler attached to my multitool, because those scales fly everywhere, and getting fish-gross in my knife sounds horrifying, and kind of unhygienic.
So... Alright, based on Jothra's observation that a saw on a crappy tool is only marginally better at cutting wood than a fish scaler, well... what do I have that's not as tough as wood that this thing could cut?
How about... an Andy Capp's Hot Fry?

BOOM! This thing is a puffed corn snack cutting MACHINE! Crushing, cutting... whatever. 100% success. I'd wager to say it could also break a tortilla chip, but that's untested.
Alright, how about as a fancy hors d'oeuvres 'fork'?

Ohhh... Man! Knocking it out of the PARK, with that cheese-lancing action. But what if we demand that it steps up its food-poking game? What about beef stick snacks? That's got some HARD casing to punch through. Will it...?
It is absolutely KILLING IT! :ahhh
It may LOOK to the casual, untrained eye, that I am having a plate of snacky food, and screwing around, but I ASSURE you that this is not the... okay, yeah.
Well, what if I use it to fight off a NINJA ATTACK?!?

I'm going to be honest. It worked okay. I won, as you can see in the.. uh... picture... if you just ... kind of squint and...
Look, I was a little preoccupied with ground-and-pound on a ninja to worry about my photographic composition, OKAY?!? :DAlright.
Now that THAT silliness is over.
It is a joke as a fish scaler. It's most realistic description is 'pokey bit of metal'. The dentition on it are JUST aggressive enough that it would be good for scratching the bottom of your foot, if it were itchy.
I am sick to death of fish scalers, and more than being worthless, there is absolutely NO way to extract this tool into its open position. I had to use the tweezers to pry it open.
As a cheese stabber: Win
Other than that: NOPE! -
I think we're about to wrap up with this second tool in the challenge.
Screwdrivers...
The cap lifter/flathead doesn't function as a flathead driver. Someone didn't bother to taper the edge to make it slot into screws. Complete fail
The backside Phillips is small. So small in fact that it slots into the common screws found in small plastic objects, like my kitchen scale, or electronic games or toys. It slots in well, and while the tool wouldn't handle serious torque, this application doesn't require it. Complete WIN for the Phillips.
What's left? Nail file. Yes, it files nails. It's actually decently aggressive. And the under nail cleaning tool is okay. Not spectacular, but it works. Nail tool WIN.
Tweezers are not as fine as I would like, but will work to pluck a stray hair without cutting it. I'd say marginal pass. You're going to need the tweezers if you ever wish to open the fish scaler tool.
The toothpick is a very flimsy feeling plastic, and I think any actual use would deform or break it. But that's not a big deal
The retention on both the tweezers and toothpick are good, strong but not too strong.
Split ring on lanyard seems fine.
And the anemic corkscrew goes untested, for fear of tearing the tool apart, but it has a good point that I'm sure would work well to pick a knot in cordage apart.
Wrap-up.
Decent blade, functional cap lifter (if finicky), functional can opener, tolerable light-duty scissors, surprisingly functional saw, ok awl and sewing needle, good phillips, and passable tweezers, all in about 2.5 ounces, and in a form that will slip into a coin pocket, wrapped in nice looking transparent red scales.Worth $4? I think absolutely. And, I'd rather pay $4 for this than $1.09 for the Dollar Tree SAK knockoff. There is no frightening side to side play of the blade, and the scissors actually work. This takes first place on the leader board, but it's only the second tool tested.
-
much better than expecten in some regards.
And I too hate fish scalers, I've never scaled a fish either.
What I've done to them in my SAKs is grind and sharpen the tips to make them better improvised forks to properly catch hard to pick food (olives, anchovies, slippery pickles, etc)...takes a minute on sandpaper
and I also despise non tapered flatheads like this one, they are even bad prybars!

-
Yep on both. Some of the problems with this tool could be solved with a dremel and a few minutes' work. I kind of like the idea of sharpening the fish saw. For It COULD make a good 'fork', stabby bit, whatever.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
