Leatherman 2018 Rumors?
-
A Phillips, flat drivers would work. With the Signal, the awl is in the blade layer, so there would certainly be enough space in the saw/file layer... quite frankly you could probably design a small bit holder (for the eye-glass bit) to fit there as well or just a long needle.
If we had two blades, one could have the awl, like the default Signal does, and the other could have something else. It would be a serrated blade, so it would be chisel-ground anyway. A flathead could go there.
In the Signal now, the awl sits next to the blade, in the gap its grind leaves. The saw and file would not allow other tools to rest next to them like that.
If we're talking just having implements opposite the saw and file, like the OHT, that would not go well. I'd rather have a longer saw that occupies the whole length of the handle.Maybe you are right (meaning one would have to put both blades on the non-hammer arm). However, my quick mock up (moving the saw to the blade-layer) shows there is quite a bit of room, depending on where you stop the saw.
You could for example have a thin hand drill there... or simply a needle.
Another idea would be a thin round file... you could have it several cm long, great to quickly clean out a hole.
-
I would actually like to see them improve the Wingman/Sidekick format. This tool is very useful in the real world with a good design basis to make it even better. They could do 4 outside tools, they could improve the pliers for better cutting, refine the scissor, they could even go locking in the future for the inner tools. It seems they went mostly in the wrong direction with the Rev, who's to say they won't improve one of their most popular and well reviewed product lines in the future.
-
I’d like a bladeless Juice. Remove the Philip’s screwdriver and put in a bit holder. Remove a couple of the small flat head screwdrivers and put in Wave scissors. Also, just remove the outside tools and make it TSA/no knife areas friendly. Just dreaming though...
Sent from my iPad using Tapatalk
-
Have the wire cutters on the skeletool a millimetre or two longer, because right now they're just too short to cut standard zip ties
-
@Etherealicer said:
Maybe you are right (meaning one would have to put both blades on the non-hammer arm). However, my quick mock up (moving the saw to the blade-layer) shows there is quite a bit of room, depending on where you stop the saw.You could for example have a thin hand drill there... or simply a needle.
Certainly something could fit in there. Even just a needle would be a nice use of space. Victorinox does it with reamers and blades. Why not a small serrated blade? Like on the Sidekick or the Boker tech tools. Maybe even tweezers.

-
Wave gen III: drop the scissor outside, the file inside, add an awl and a pair of tweezers. A bit restyling and we have the new Wave without changing it radically!
-
@tango44 said:
Sorry about my ignorance but what is wrong with the pliers on the Wave or the Rebar???
Thank you.Nothing wrong with them at all. Some, like me, love the new style plier head on the Rebar and hopes to see the Wave get this upgrade. Other love the old style or current style plier heads on the Wave. I can't blame them because it have worked for years with no problems and cuts wire fine. I like the new style because I cut a lot of wire and have worn out the cutters on my multitools and it is nice just to drop in new cutters instead of buying a new tool of finding a plier head to install.
Personally I wish LM would quit trying to make new stuff for awhile and just focus on there top heavy hitters. Just make them better here and there.
-
I would LOVE a giant Surge-sized CRUNCH! Exact same design but with a couple outside tools, And scaled up to a big 10-12oz MT.

But what I really want is for Leatherman to surprise us all with something TOTALLY NEW. Something that is really different and original. That would be exciting!
-
@King_Gorilla said:
I would LOVE a giant Surge-sized CRUNCH! Exact same design but with a couple outside tools, And scaled up to a big 10-12oz MT.
But what I really want is for Leatherman to surprise us all with something TOTALLY NEW. Something that is really different and original. That would be exciting!
You mean like they did with the Tread?
-
I like to se a mini Rebar the size of a Juice. Or making the handles on a Squirt 1 cm longer but still with the same plier head, making the knife and the file a bit more useful and giving room on the inside for a 3d philip.
-
Speaking of Signal - why would one need scissors on a tool designed specifically for use in the woods or on a trail? What is there you need to cut with scissors that you can’t use a knife for in those conditions? I have scissors on both Wave and Micra and tbh it’s my least used instrument [emoji56]
-
I think people want scissors on the Signal to make it more versatile. Maybe they should make an Urban and Survival version ala Wingman and Sidekick.
Sent from my iPad using Tapatalk
-
@alexanderre said:
Speaking of Signal - why would one need scissors on a tool designed specifically for use in the woods or on a trail? What is there you need to cut with scissors that you can’t use a knife for in those conditions? I have scissors on both Wave and Micra and tbh it’s my least used instrument [emoji56]Cut band aid to size...
What I wonder more is, what would you need bits for

-
I would LOVE a giant Surge-sized CRUNCH! Exact same design but with a couple outside tools, And scaled up to a big 10-12oz MT.

But what I really want is for Leatherman to surprise us all with something TOTALLY NEW. Something that is really different and original. That would be exciting!
You mean like they did with the Tread?
Precisely. I don't expect EVERY YEAR to be groundbreaking, but the Tread and Signal were both shown at Shot Show 3 years ago! That was a great year for Leatherman. :ahhh
Since then it's been a bunch of old stuff with new color options etc.

-
Speaking of Signal - why would one need scissors on a tool designed specifically for use in the woods or on a trail? What is there you need to cut with scissors that you can’t use a knife for in those conditions? I have scissors on both Wave and Micra and tbh it’s my least used instrument [emoji56]
Cut band aid to size...
What I wonder more is, what would you need bits for

Well I use bits for dealing with trekking poles and gas cookers
-
Speaking of Signal - why would one need scissors on a tool designed specifically for use in the woods or on a trail? What is there you need to cut with scissors that you can’t use a knife for in those conditions? I have scissors on both Wave and Micra and tbh it’s my least used instrument [emoji56]
Cut band aid to size...
What I wonder more is, what would you need bits for

Well I use bits for dealing with trekking poles and gas cookers
If I may play devil's advocate, do the fixed screwdrivers on most tools not cover those needs? I took the question more as why would you need so many additional drivers that the bits would be worth it in that usage.
-
My personal take is that one would normally prefer sturdier tools on multitools destined for usage outdoors or in emergency situations and more versatile tools in urban or household situations. I have therefore in the recent past proceeded to modify some of my LMs accordingly. That is, more fixed use tools on the outdoor or emergency set and more versatile ones (such as bit drivers and scissors) on the urban or household ones. This, together with local legal carry restrictions has in my case resulted in making non-OHO tools such as the ST300 and Rebar more versatile and the OHO tools such as Wave and Surge more rugged. YMMV, due to normally fewer and very occasionally (UK, EI, AU) more restrictions. I'd hope that in future LM would take into account these local oddities to a greater extent by offering more tool sets per basic platform...
-
@ReamerPunch said:
How about reintroducing the Juice KF4?
Or have the serrated blade replaced with scissors. Maybe screws instead of pins.Yes. Many years later, and I still think this is a great idea.
And to keep re-living old dreams... I'd like to see a real tool-steel pliers on a Rebar or Wave.
-
How about reintroducing the Juice KF4?
Or have the serrated blade replaced with scissors. Maybe screws instead of pins.Yes. Many years later, and I still think this is a great idea.
And to keep re-living old dreams... I'd like to see a real tool-steel pliers on a Rebar or Wave.
Yep, I agree with both of these :D Good to see you NE

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login