Home solution for loose pliers pivot! Experiment!
-

Sent on my SM-G930F with Tapatalk
-
Here is my solution
/post/1283754
If there is a better way I'm all

-
@SteveC said:
Here is my solution/post/1283754
If there is a better way I'm all

Yes. I would actually believe so. That method scars up the pivot. I have tried to repair some with that method, not all of them works. I am just waiting for more popcorns and then access to my computer. Let's keep the suspense up. 😂😂
-
-
@Sam Lim said:
Here is my solution
/post/1283754
If there is a better way I'm all

Yes. I would actually believe so. That method scars up the pivot. I have tried to repair some with that method, not all of them works. I am just waiting for more popcorns and then access to my computer. Let's keep the suspense up. 😂😂
Sounds good, Even Leatherman and their hydraulic press scars the pivot a bit when they do warranty work.








































































-
OK. First of all, I will just say that this is done at your own risk and I will not be responsible etc blah blah blah... ;) It probably doesnt work on seriously loose pliers.. probably nothing will..
Here goes. Get a pair of small locking pliers/ vise grip similar to this. Irwin's are great.

Do some marking like this on the 'dead' pivot end. So that you know later when you do the adjustments, you know its not a placebo effect. That leatherman plier was from another mod, my cut up wave. I have since given it a new set of plier it deserve. :)

Next, you will need to turn the whole pivot and make sure you only grip the pivot. Thats why you need a smaller vise grip. Cushion the surface with something so you protect the surface. If this fails, at least you can still send it for warranty claim.

Next, you turn. Clock wise or anti clockwise, I forgot. it probably doesnt matter. Either side it will loosen or tighten the pivot.

It had worked on my OG wave, Juice, Skeletool, Wingman, numerous modern Wave type pliers. I actually got so excited the I dug out all of my loose pliers to try. All worked. I have absolutely no idea behind the mechanics, physics nor design behind this pivot.
I know. It sounds too simple and incredibly unbelievable. Give it a try and report back. Try it especially on the Wingman sprung pliers as most of the time they are bad. On the surface, it solved the problem. Tomorrow I am going to take one of it to use extensively to see how it holds up.
Enjoy. Thanks for the popcorn.. burp
-
Woohoo! I finally have my 4th nut. That took long enough!

-
Brilliant !

Just tried it on a spare set of pliers and it works great. You can easily dial in the amount of tightness depending on how far you turn it. It didn't take much of a turn to tighten these up.


-
What did you use to pad the jaws I tried a few thing but all slipped ?
-
Thanks for the information.

-
Worked on my Sidekick sprung plier

-
Awesome :ahhh I don't have any loose pliers with me ATM but I may give this a go as well when I get home

Great find Sam

-
Great discovery!

-
Fascinating... excellent find. This suggests the pivot is simply screwed in. One wonders however how self-unscrewing during normal use is prevented. If with thread locking fluid, this might need to be renewed to make the repair more durable, for which outright disassembly would be required...

Edit: this also suggests spacers might be fabricated out of bronze, to fit the pivot surfaces almost completely, e.g. using a lathe. This combined with a largish vise grip might work.
Sent on my SM-G930F with Tapatalk
-
Loose plier heads?! What the...
Oh! I see!
I stumbled in the Leatherman section here! >:D

Great find though...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login