Showcase: Mods to plier-based multitools
-
Just to add that I had to shorten the scissors' thumb tab to allow it to fold fully flat against the inside of the handle - the plier spring was in the way. Took off about 2 mm.
Bit driver and large flat driver positions were reversed, under certain circumstances the plier head would snag the large driver.
Sent on my SM-G930F with Tapatalk
-
Bear with me guys and gals - been playing around with tool orders on the Rebar VX a little more to optimise it. I think this is the best compromise with the tool loadout I prefer.



Sent on my SM-G930F with Tapatalk
-
@Dutch_Tooler said:
Bear with me guys and gals - been playing around with tool orders on the Rebar VX a little more to optimise it. I think this is the best compromise with the tool loadout I prefer.


Sent on my SM-G930F with Tapatalk
It's definitely frustrating to change the load out and to arrange them in the perfect offer. But it's sure is fun doing it. So.. When's it going to change again? :D
-
Love the mods that have been added recently
Nice ones Hi, BP and DT
Great stuff 
-
ToolName: The KFS8
Basis: LM Juice
Aim: The Juice KF4 is often mentioned as best in Juce range, except some want scissors included.... but at the expense of which other outer tool?
Mods: Used various parts to build a KF4, and added extra layer on both sides. Needed to grind down the extra layer as it was too wide. Added a package opener from a TaoTool (needed to grind down to get it to fit. Used part of regular Juice scissors for a hook-type tool. Used a small bit adaptor from the Wave range (needed to grind down and fit a shim to the pivot hole to bring it to right size. Sanded down scales and painted using a car repair kit. -
Juice on juice

Nice...
Sent on my SM-G930F with Tapatalk
-
Looks amazing!

-
ToolName: The KFS8
Basis: LM Juice
Aim: The Juice KF4 is often mentioned as best in Juce range, except some want scissors included.... but at the expense of which other outer tool?
Mods: Used various parts to build a KF4, and added extra layer on both sides. Needed to grind down the extra layer as it was too wide. Added a package opener from a TaoTool (needed to grind down to get it to fit. Used part of regular Juice scissors for a hook-type tool. Used a small bit adaptor from the Wave range (needed to grind down and fit a shim to the pivot hole to bring it to right size. Sanded down scales and painted using a car repair kit.I'll admit I'm not much of a Juice series fan but this one is just ::)
you got it nailed down!! :o
-
Nice BP
The paint job in it is a nice touch

-
I believe this should be the last and final update of
Tool Name: ReWaveR (Rebar Wave, Ruggedised)
Basis: Leatherman Wave
Aim: Making a ruggedised version of the Wave along the lines of my Surge R.
Mods:: removed scissors and both large and small bit drivers (these went into my Rebar VX), added the Rebar's fixed Phillips and small screwdriver (trimmed down to fit) as well as an awl fashioned out of another small Rebar screwdriver (courtesy of Breezy12
). The plier head rest tabs in both handles has to be removed by twisting them off and grinding away the remains. Also swapped the plain and serrated edge blades for those of a Charge (better steel PE blade and SE blade with ground cutting hook).
*UPDATE: Swapped the pliers head for one from a Rebar, hence the renaming. This is slightly wider along a limited portion of its length and therefore prompted minor adjustments by filing away excess material in the flat screwdrivers (small one: further reduce shank width; large one: small bevel), the can opener (small bevel) and inside the handles (non-critical portions of the internal spring and of the rivets Dremeled away) *
Links: /post/1577728, /post/1589620, /post/1608674, /post/1609062

-
Tool Name The Pocket Crunch
Basis Leatherman Crunch
aim Making the Crunch a uk legal edc with a LM Kick pocket clip
Mods Blade replaced with LM Wave
scissors and fitted with the LM kick clip
link to scissors mod /topic/75857
Pocket clip mod /topic/75590


-
That is nice.
On a tangential note, where are you guys getting those little plus-shaped wrenches you are using for disassembling your Leathermans?
-
@ironraven said:
That is nice.On a tangential note, where are you guys getting those little plus-shaped wrenches you are using for disassembling your Leathermans?
loki-mobile sells them

Here is the link /topic/61708 -
Will this become a sticky when all done Dutch_Tooler ?

-
That could be applied for, if there is enough interest, I guess. Hadn't intended to so far though.
-
@Dutch_Tooler said:
That could be applied for, if there is enough interest, I guess. Hadn't intended to so far though.It would be nice to keep this information
On the first page for anyone to see if they
are thinking of doing a mod
Or to ad more mods after someone has done some
It's just when I was looking for mods that I found it
A bit hard to find the mods I was looking for
It would of been a lot easier if it was all on the first page as a sticky

-
That could be applied for, if there is enough interest, I guess. Hadn't intended to so far though.
It would be nice to keep this information
On the first page for anyone to see if they
are thinking of doing a mod
Or to ad more mods after someone has done some
It's just when I was looking for mods that I found it
A bit hard to find the mods I was looking for
It would of been a lot easier if it was all on the first page as a sticky


sticky!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

