What did you use your Leatherman for today?
-
Used my ST300, bit adapter and bits yesterday to take apart a few Stihl cut off saw pull started rope assemblies
The star bit on the bit adapter was just the right size to take the spring out on a couple of them and now we have 3 extra rope pulls that can be mounted in the case of a rope break 
-
@Poncho65 said:
Used my ST300, bit adapter and bits yesterday to take apart a few Stihl cut off saw pull started rope assemblies
The star bit on the bit adapter was just the right size to take the spring out on a couple of them and now we have 3 extra rope pulls that can be mounted in the case of a rope break 
Thos chainsaws are Stihl the best.
See what I did there? :D
-
Used Wave today to strip wires, hold things in place and screw the screws in order to install a lamp next to the front door of our house. Smurfy junkies always steal regular lamps but this time they stole a lamp slot as well. Why would you do that? No idea. And the house is serviced by the government of course, so not much to expect [emoji23]. So I decided to replace it with a lamp I had just laying around for years. It’s useless if stolen, so hopefully it’ll stay there longer [emoji56]. No pics of the process, sorry, maybe gonna add a pic of the lamp working a bit later when it’ll automagically turn on later today [emoji362].
-
Missed me, my Tele and my Wave? [emoji23]
Finally made a perfect (well, almost [emoji85]) telecaster. Got rid of that pesky switch that makes quick neck pickup engagement close to impossible, installed a proper one instead and got rid of the useless tone knob in favor of two independent volume controls. Had to drill three holes in that blank replacement control panel, but now this tele has the best of both fender and gibson worlds [emoji171][emoji171][emoji171]






-
Very nice work!

-
So you have no tone controls now (apart from varying the volume of the differing tone of the pickups)?
-
@Syncop8r said:
So you have no tone controls now (apart from varying the volume of the differing tone of the pickups)?Yep, it’s even referred to as “two volumes no tone” wiring diagram on Seymour Duncan website [emoji2]. Never use tone really on any of my guitars, so changed it in favor of something I really need
-
Used my ST300, bit adapter and bits yesterday to take apart a few Stihl cut off saw pull started rope assemblies
The star bit on the bit adapter was just the right size to take the spring out on a couple of them and now we have 3 extra rope pulls that can be mounted in the case of a rope break 
Thos chainsaws are Stihl the best.
See what I did there? :D
Just seein this Peacent
Great pic as well 8) -
Why, for modding of course -》 link to Wave mod :D
-
Used the saw and the pliers on my Wave to disassemble an old grandma's table and then threw it away. What a handy thing the Wave really is, can't stop admiring it.
Sent from my SAMSUNG-SM-J120AZ using Tapatalk
-
@alexanderre said:
Used the saw and the pliers on my Wave to disassemble an old grandma's table and then threw it away. What a handy thing the Wave really is, can't stop admiring it.Sent from my SAMSUNG-SM-J120AZ using Tapatalk
so handy and admirable, but you still threw the Wave away!! :ahhh :ahhh

-
Used the saw and the pliers on my Wave to disassemble an old grandma's table and then threw it away. What a handy thing the Wave really is, can't stop admiring it.
Sent from my SAMSUNG-SM-J120AZ using Tapatalk
so handy and admirable, but you still threw the Wave away!! :ahhh :ahhh

::)

-
Used the pry-bar-like screwdriver of my Wave to open up walnuts :)
-
Used the saw and the pliers on my Wave to disassemble an old grandma's table and then threw it away. What a handy thing the Wave really is, can't stop admiring it.
Sent from my SAMSUNG-SM-J120AZ using Tapatalk
so handy and admirable, but you still threw the Wave away!! :ahhh :ahhh

I knew for sure someone will read it that way [emoji23]
-
Selling my garage in order to accumulate some $ and buy a new home, so used Pages app on iPad to make a good looking ad, printed it and then used my LMs to shape it right. They are cut to be a bit smaller than the standard A4 sheet so I could wrap them up in a plastic file to protect from moisture and the one that I’ll place on the metal garage door has 3 tiny magnets taped to it from behind [emoji41]
Tried to use Wave’s scissors at first, but it was really stupid not to switch to Micra [emoji2]


-
@alexanderre said:
Selling my garage in order to accumulate some $ and buy a new home, so used Pages app on iPad to make a good looking ad, printed it and then used my LMs to shape it right. They are cut to be a bit smaller than the standard A4 sheet so I could wrap them up in a plastic file to protect from moisture and the one that I’ll place on the metal garage door has 3 tiny magnets taped to it from behind [emoji41]
Tried to use Wave’s scissors at first, but it was really stupid not to switch to Micra [emoji2]


K
Is that Russian or Ukranian?
The body of text is in Russian but for the title you have Prodam, why not Prodau? Just curious as I never really learned Ukranian. -
Selling my garage in order to accumulate some $ and buy a new home, so used Pages app on iPad to make a good looking ad, printed it and then used my LMs to shape it right. They are cut to be a bit smaller than the standard A4 sheet so I could wrap them up in a plastic file to protect from moisture and the one that I’ll place on the metal garage door has 3 tiny magnets taped to it from behind [emoji41]
Tried to use Wave’s scissors at first, but it was really stupid not to switch to Micra [emoji2]


K
Is that Russian or Ukranian?
The body of text is in Russian but for the title you have Prodam, why not Prodau? Just curious as I never really learned Ukranian.It’s actually in Russian, older people in here still mostly speak Russian due to Soviet Union influence and past. However youth tends to speak Ukrainian more and more which is kinda cool, but they are less likely to be able to buy the garage there yet. Marketing stuff you know [emoji23]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


