Home solution for loose pliers pivot! Experiment!
-
The terms did not mention a chicken, punishment or otherwise

Oh dear, you don't even know about the lard, do you?

He should be thankful for the lard.
-
The terms did not mention a chicken, punishment or otherwise

Oh dear, you don't even know about the lard, do you?

He should be thankful for the lard.
Shh, he's not supposed to know that... >:D
-
The terms did not mention a chicken, punishment or otherwise

Oh dear, you don't even know about the lard, do you?

There has been a change we now use

-
The terms did not mention a chicken, punishment or otherwise

Oh dear, you don't even know about the lard, do you?

There has been a change we now use

Bah, those newfangled lubes got nothing on good ol' lard!

-
@Pablo O'Brien said:
@Sam Lim said:
Loose plier heads?! What the...
Oh! I see!
I stumbled in the Leatherman section here! >:D

Great find though...
I forgot to mention I had tried this on my Gerbers, worked on none of them..

:D
What about SwissTools? Oh that's right, they don't develop plier play or any other problems because they are swiss.

@Mechanickal said:
Loose plier heads?! What the...Oh! I see!
I stumbled in the Leatherman section here! >:D

Great find though...
Well you both have egg on your face because I just received my first Vic Spirit and guess what

Spoiler:
loose plier pivot :o -
Perhaps you got one that someone actually used. ;)
-
-
@Pablo O'Brien said:
@Sam Lim said:
Loose plier heads?! What the...
Oh! I see!
I stumbled in the Leatherman section here! >:D

Great find though...
I forgot to mention I had tried this on my Gerbers, worked on none of them..

:D
What about SwissTools? Oh that's right, they don't develop plier play or any other problems because they are swiss.

@Mechanickal said:
Loose plier heads?! What the...Oh! I see!
I stumbled in the Leatherman section here! >:D

Great find though...
Well you both have egg on your face because I just received my first Vic Spirit and guess what

Spoiler:
loose plier pivot :oYou sure it ain't just broken in?
Or abused to oblivion?
-
It has play in it just like some of my Leatherman pliers. It's in really good shape in fact it looks like it was hardly used. Some minor wear on the wire cutters.

-
The terms did not mention a chicken, punishment or otherwise

Oh dear, you don't even know about the lard, do you?

There has been a change we now use

Bah, those newfangled lubes got nothing on good ol' lard!

I choose to remain in blissful ignorance of all of this and will cross that bridge when it comes
8) 8) -
@Sam Lim said:
I too think that is the possible reason. The sloping theory is just too complicated to implement. What the heck, so how many have been fixed? [emoji5]I think I have to agree with that hypothesis too. Earlier today I submitted a PST to the treatment - and which better tool to use for it than a Crunch? :D Gripping the pivot tightly with two spacers between it and the jaws and turning resulted in nigh-on disappearance of the somewhat alarming PST pliers pivot wobble. Great tip Sam


Sent on my SM-G930F with Tapatalk
-
@Sam Lim said:
I too think that is the possible reason. The sloping theory is just too complicated to implement. What the heck, so how many have been fixed? [emoji5]
I think I have to agree with that hypothesis too. Earlier today I submitted a PST to the treatment - and which better tool to use for it than a Crunch? :D Gripping the pivot tightly with two spacers between it and the jaws and turning resulted in nigh-on disappearance of the somewhat alarming PST pliers pivot wobble. Great tip Sam


Sent on my SM-G930F with Tapatalk
Glad it helped! Another leatherman revived! Yay! 
Ps* using spacer/washers sounds like a really great idea.
-
That's great work
I will try this later on my LM supertool they where loose from day one
-
It works no more play excellent tip

-
My LM supertool pliers were loose from day one >:(
And always annoyed me
I'm just pleased it's now a 100%
Thanks again for your excellent tip
-
Couldn't get this tip to work on my Tti Charge. Clamped it unbelievably tight with my small Vice Grips using card stock discs I cut out with a hole punch for protection and it wouldn't budge. Tried it in my vise with the same results. I wound up doing what I've done for 40 years on pliers with this pivot type- put the ball end of a ball peen hammer right in the center of the pivot and smacked it with another hammer. It's perfect now like it was out of the box over 2 years ago.
-
@srvctec said:
Couldn't get this tip to work on my Tti Charge. Clamped it unbelievably tight with my small Vice Grips using card stock discs I cut out with a hole punch for protection and it wouldn't budge. Tried it in my vise with the same results. I wound up doing what I've done for 40 years on pliers with this pivot type- put the ball end of a ball peen hammer right in the center of the pivot and smacked it with another hammer. It's perfect now like it was out of the box over 2 years ago.Probably wouldn't work with all but most I would say.
Btw doing what you do are rather unsafe.. Hammer on hammer is not a good idea.. Shards may fly... U should use a punch or something "softer"..
-
Where to grip on the pivot is always a trial and error. Doesn't mean gripping dead centre will turn it. A little hard to explain.. But when u have all the tools on hand, before clamping down, have a mental picture of where you clamp may have the most effect in turning it. So far, worked on most. I did also encounter one or two that refuse to budge. A few were loose beyond this method can help. So the punch and hammer would still have to come in for those nasty ones.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

