And so it begins.... (My adventures into Alox!)
-
-
-
Is there a reason you flip the scissors and the mag layers on the yeoman?
Maybe this can explain:
/topic/64069
Sent from my iPhone using Tapatalk
Is there a reason you flip the scissors and the mag layers on the yeoman?
Modern phillips would hit the scale.
Thanks guys, that makes a lot of sense I’ll have to try it out on one of my next builds.
-
More great work coming from the laundry room.

-
The talk and anticipation and the pics about the MTO Pioneer X have led to a certain craving for an Alox 93 mm SAK (colour yet to be determined, but preferably other than just silver) with a few more tools than the PX - this must be down to a predilection for the Swisschamp, I simply feel naked with too few tools on a SAK.
I'd start building from a PX (but don't - yet - want to sacrifice the MTO one soon to arrive :D). As add ons, for instance, a saw would be nice (Farmer?). Pliers, a magnifying glass and a Phillips too (the latter I'd have to source from a 91 mm model, I take it - correct?).
What I'm leaning towards is to mod the pivots to screw-fixed ones like I have seen Syph007 use. I take it the stock PX has 3 mm pivots outside and 2.5 mm inside. Does the mod maintain these sizes, or enlarge them? I have seen references to 1/8" pivots - are there alternatives (preferably sources closer to home in the EU) e.g. 3 mm (and preferably 2.5 inner)?
Sorry if these questions have been asked before, I couldn't quickly find the answers.
Edit: corrected 1/4 to 1/8" (I claim lack of familiarity with imperial units :D)
-
Everyone seems to use 3.2mm (1/8") screw pivots, and yes, the holes have to be expanded. :ahhh
-
What Pablo said, unless you can make your own. In order to add the philips/magnifier layer you'll need a Pioneer blade spring, and for the pliers you'll need two Farmer saw springs. So to make a Pioneer X + pliers + saw + philips/magnifier (Alox Deluxe Woodsman maybe?) you'll need a Pioneer X and three Farmers, plus the donor for the other tools such as a Swiss Champ...
-
Thanks guys

I'd better start scouting the various sources...
-
@hiraethus said:
What Pablo said, unless you can make your own. In order to add the philips/magnifier layer you'll need a Pioneer blade spring, and for the pliers you'll need two Farmer saw springs. So to make a Pioneer X + pliers + saw + philips/magnifier (Alox Deluxe Woodsman maybe?) you'll need a Pioneer X and three Farmers, plus the donor for the other tools such as a Swiss Champ...Needing so many donors is why I don't do the 93 work anymore.
-
Ah... yes I thought I had noticed some tapering off of your interest for them... well, let's see.
-
Compact deluxe tinker, all tumbled Ti parts and hex hole instead of cross. :D
-
And a bonus feature is the pliers hold in the hex bit. :D
-
Very nice!!
Sent from my iPhone using Tapatalk
-
Nice

JR -
Another amazing knife.

This has probably been asked before. Where do the parts come from? Does the client send you the different knives to dis-assemble or do you have the parts to make the requested knife? Or is it a combination of yours & clients parts?
-
@MusicMen said:
Another amazing knife.

This has probably been asked before. Where do the parts come from? Does the client send you the different knives to dis-assemble or do you have the parts to make the requested knife? Or is it a combination of yours & clients parts?
I buy a buttload of new saks and rip them apart and keep the parts ready to go nicely organized in organizer bins.

-
Another amazing knife.

This has probably been asked before. Where do the parts come from? Does the client send you the different knives to dis-assemble or do you have the parts to make the requested knife? Or is it a combination of yours & clients parts?
I buy a buttload of new saks and rip them apart and keep the parts ready to go nicely organized in organizer bins.

Thanks! I appreciate the info. I keep looking at your
amazingmagnificent work and thinking about my perfect knife.
You sir, are a gem among gems. A
to you. -
@hiraethus said:
What Pablo said, unless you can make your own. In order to add the philips/magnifier layer you'll need a Pioneer blade spring, and for the pliers you'll need two Farmer saw springs. So to make a Pioneer X + pliers + saw + philips/magnifier (Alox Deluxe Woodsman maybe?) you'll need a Pioneer X and three Farmers, plus the donor for the other tools such as a Swiss Champ...Building further on this as yet unnamed (but thanks for the suggestion hiraeuthus
) concept, I have a few questions:- What would it take to add a long file (not the short Cadet file)? (Are there specific long 93 mm files from models that have run out? Can 91 mm files be adapted (easily)? I take it (yet) another (Farmer) back spring would be required?)
- I believe I have read that the commercially available 1/8" pivots are 1/2" in length max. I also believe I might be going over that mark, with what I'm planning. Would I have / be able to join two pivots lengthwise? Would the result still be strong enough?
- Has anyone been able to add back tools to a 93 mm model? Just toying with the idea for things like a corkscrew and chisel. However, this does seem non-trivial :D.
- The electrician blade, is that the same tang width as the openers and normal small blade?
Thanks in advance :D
-
@Dutch_Tooler said:
Building further on this as yet unnamed (but thanks for the suggestion hiraeuthus
) concept, I have a few questions:- What would it take to add a long file (not the short Cadet file)? (Are there specific long 93 mm files from models that have run out? Can 91 mm files be adapted (easily)? I take it (yet) another (Farmer) back spring would be required?)
- I believe I have read that the commercially available 1/8" pivots are 1/2" in length max. I also believe I might be going over that mark, with what I'm planning. Would I have / be able to join two pivots lengthwise? Would the result still be strong enough?
- Has anyone been able to add back tools to a 93 mm model? Just toying with the idea for things like a corkscrew and chisel. However, this does seem non-trivial :D.
- The electrician blade, is that the same tang width as the openers and normal small blade?
Thanks in advance :D
- Just enlarge the pivot hole on a 91mm file. It drops straight in place of the Farmer saw. Yes, you'd need another saw spring.
- Yes, you can join 2 pivots. Use a long screw so it bridges the join. You may need to smooth the joint using sandpaper.
- Not possible. You need the fourth hidden pin for the backtools to work. Better off putting alox/Ti/whatever scales on a 91mm SAK (as Syph now does)
- I'm not sure. IIRC, it's thinner than the openers but might be slightly thicker than the 91mm small blade. You get a spacer next to it in the Electrician, and making a new one from the right thickness material is fairly easy. You'll need to bend it a bit if you fit it in place of the awl, unless you can find on from a 84mm celidor Electrician.
-
Great, thanks hiarethus

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login