Parts for Upgrade/Repair Leatherman multitools
-
Hi Loki, any info about the screw?
-
Hi Loki, wish to place order for Wave S30v blade plus the appropriate t10 torx bits. pm sent. Cheers
-
Hi Loki, any info about the screw?
Sorry, did not notice the message. Need only a screw?
Yes, only the screw.
-
How much are the S30V Wave blades?
-
Do you still have the MUT saw blade available?
-
Looking for a awl for a black surge if you have one left?
What is available in the way of upgrade to the pliers as mine are pretty blunt too!?Thanks
Sam -
@Samuelcox said:
What is available in the way of upgrade to the pliers as mine are pretty blunt too!?Is yours an original Surge with the non-replaceable cutters?
-
What is available in the way of upgrade to the pliers as mine are pretty blunt too!?
Is yours an original Surge with the non-replaceable cutters?
Yep original surge
-
What is available in the way of upgrade to the pliers as mine are pretty blunt too!?
Is yours an original Surge with the non-replaceable cutters?
Yep original surge
I'll look for an awl, and pliers can only be replaced with the same ones
Отправлено с моего MI 6 через Tapatalk
-
If you still have them available, I would like to buy:
1x Wave/Charge big bits holder - $12Sent you a PM.
-
To reference a previous post:
The sut300 pliers do pretty much fit the surge (with a slight gap caused) can you fit rebar pliers instead with Spacers?
/post/1472998 -
@loki-mobile said:
Current availability:
Price includes shipping worldwide.Pliers:
ST300/NEW Surge/MUT Pliers - $35 (3 new)
MUT Black Pliers - $38 (2 new)
Blast/Fuse/Wave/Charge Ti Pliers - $35 (5 new)
Skeletool/Freestyle pliers - $30 (4 new)
Charge ALX Black - $38 (1 new)
ST300/New Surge CC Black - $38 (2 new)Blades:
Wave - $17 (3 new)
Charge Ti/Al/ALX (154CM) - $20 (5 new)
Charge ALX black (154CM) - $25 (2 new)
Charge TTi/XTi/ALX Serrated Blade with Hook - $25 (10 new)
Skeletool/Freestyle (420) - $17 (10 new)
Skeletool/Freestyle (154CM) - $21 (5 new)
Skeletool/Freestyle (Combo 154CM) - $25 (1 new)
Surge - $22 (3 new)
Surge serrated - $22 (3 new)
MUT black - $27 (1 new)
ST300 EOD Semiserrated blade - $28
ST300 Black blade (not new, but excellent condition) - $19
ST300 blade - $18
Blast/Fuse blade - $19Other:
Wave/Charge saw - $17 (3 new)
Wave/Charge file - $17 (7 new)
Blast/Fuse File - $19
Blast Saw - $19
Wave/Charge big bits holder - $12 (10 new)
Wave/Charge/Blast small bits holder - $12 (20 new)
Wave/Charge/Blast/Rebar flat screwdriver - $12 (20 new)
Wave/Charge/Blast/Rebar flat screwdriver black - $14 (10 new)
Blast/Fuse small flat screwdriver - $12 (5 new)
Rebar small flat screwdriver - $12 (3 new)
Wave/Charge/Blast/Rebar opener - $10 (10 new)
Wave/Charge/Blast/Fuse scissors - $15 (20 new)
Blast/Fuse/Kick phillips screwdriver - $15 (1 new)
Rebar awl - $12 (4 new)
Surge/ST300 awl - $12 (3 new)
Surge/ST300 awl black - $14 (3 new)
Surge big bits holder - $17 (2 new)
Surge small bits holder - $17 (5 new)
Surge saw/file holder - $22 (7 new)
Surge saw/file holder black - $24 (4 new)
Surge scissors - $28 (10 new)
Surge scissors black - $30 (1 new)
Surge/ST300 small flat screwdriver - $12 (5 new)
Surge/ST300 small flat screwdriver black - $14 (3 new)
Surge/ST300 big flat screwdriver - $12 (2 new)
Surge/ST300 big flat screwdriver black - $14 (2new)
MUT saw - $25 (1 new)
ST300 saw holder - $45 (2 new) High price, picked to try & my progect :)
Wingman scissors - $19 (3 new) High price, picked to try & my progect :)
Kick Pocket Clip - $20If you still have them available, I would like to buy:
1x Wave/Charge big bits holder - $12Sent you a PM. Can you check your inbox please, and get back to me with an answer when you can?
Thanks! -
Hi loki-mobile would you have a pivot screw that would fit the screw that came with the kick pocket clip
I want to fit it to my LM crunch but the thread pitch is more course on the crunch
And fine thread pitch on the kick screw here is a photo to see the difference
I tried this when I pm you but wouldn't work
Thanks again Wspeed

-
Just found this thread. I need a file for an original SuperTool. Can you get those?
-
Hello, i've been a lurker for some time and now i decided to go the Mod Path with some of my Lmn's.
Since this is my first post, greetings to y'all.
Dear Loki
I need the following:
1x Surge saw/file holder - $22
*with the screws/pins from that side (i believe they are a bit longer). You can throw a washer also.
1x Blade -Charge Ti/Al/ALX (154CM) - $20
*If some parts arrive in the mean time i would preffer a Charge TTi (S30V)
1x MUT saw - $25 -
It seems that i am not allowed to send PMs.
@Loki-mobile- how do we proceed further
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login