powerlock owners club,
-
@Bancomat85 said:
Hi guys!! I'm waiting my fist sog, a PowerLock Traveler...can i join the club?? [emoji16]Heck yeah! Take some pictures for us when it arrives!
-
@Bancomat85 said:
You cut a nail with you PL?? I heard that the steel of the jaws is too soft and can easily bend, but don't seem so... [emoji16]my old Powerlock (RIP :'() had a dented cutter due to trying to cut something I thought it would cut, but the steel was too soft.
Hopefully you can appreciate the dent in the pics

and yeah, since I last posted in this club I've lost the tool so I don't belong here anymore :-[

-
Hi guys!! My powerlock is at home!! [emoji16][emoji16] i've just a question for you: is normal that the little pieces that covers the compound system moves a little bit? When i pull out from the blister it seems that they were rock solid, but now after a few flick they moves a little.. i've to ask amazon for a change or is all ok?
-
Here the new baby!! Really funny to play with her, but i spotted a few imperfections and i don't know if is normal or not...
The needlenose points pf the pliers are slightly not aligned...
the spring on the 1/4 inch socket drive fall off too often, but i can fix it...
the lock of the tools isn't so smooth and solid as the Leatherman one, but it works well...
As i told in a previous post, the little pieces that covers the compound system moves a little bit...
The scissors are really useless... worst scissors ever seen, i'll probably swap with the v-cutter (that seems way better).Your powerlock are perfect? Or you have my same problems too?
The overall impression is good, but i really would know if my exemplar is defective or if sog quality control standard is...this...
-
being the owner of 6 SOGs, and 3 more that I don't have anymore...it is normal :D
All SOG scissors are bad, ugly and work very bad for most things.
Their tools are usually smooth as butter but the implements and their locks are often gritty, hard to use and don't always lock properly, they fail under force much sooner than Leatherman locks in my experience.
Both my Powerlocks had locking issues (those drivers bit me more than once under pressure when the locks disengaged)
The spring in the 1/4th driver is usually solid (on 3 of my 4 SOGs that have it) but on one of my PL it also fell with alarming ease
And as for the alignment, many tools from all brands (yes, Victorinox, LM and Gerber too) have that mis-alignment and unless it's something horrendous and blatant I wouldn't worry much. -
Nothing that could compromise the full functionality of the pliers... and nothing that i can' fix with a diamond stone... [emoji23][emoji23] i've already fixed the spring on the 1/4 inch drive using a little piece of heat shrink tubing... now i want to sharp the can opener to use it as a pack opener... if you have any other little mod to suggest, talk! [emoji16]
-
The new baby with her new "bit kit"

-
Just got mine in today!
Does anyone know if the Powerlock series is still made in the US? -
@Spartan19 said:
Just got mine in today!
Does anyone know if the Powerlock series is still made in the US?They are not. The tell tell is the switch from 1/4 bolts to allen key screws. US models had 1/4 screws.
Some allen key screw versions were US, but the only tell tell is the plier head. If it is not engraved USA, it is most likely not US made. However, with that said, the quality is very close.
-
Just got mine in today!
Does anyone know if the Powerlock series is still made in the US?They are not. The tell tell is the switch from 1/4 bolts to allen key screws. US models had 1/4 screws.
Some allen key screw versions were US, but the only tell tell is the plier head. If it is not engraved USA, it is most likely not US made. However, with that said, the quality is very close.
Ok, thanks man!

-
Just got mine in today!
Does anyone know if the Powerlock series is still made in the US?They are not. The tell tell is the switch from 1/4 bolts to allen key screws. US models had 1/4 screws.
Some allen key screw versions were US, but the only tell tell is the plier head. If it is not engraved USA, it is most likely not US made. However, with that said, the quality is very close.
Ok, thanks man!


On the plus side, SOG PowerLock MTs didn't suffer much when they changed country of origin. So that's a BIG plus. :)
Congrats on the BO PowerLock! They are a real workhorse and look quite nice as well! :) -
Just got mine in today!
Does anyone know if the Powerlock series is still made in the US?They are not. The tell tell is the switch from 1/4 bolts to allen key screws. US models had 1/4 screws.
Some allen key screw versions were US, but the only tell tell is the plier head. If it is not engraved USA, it is most likely not US made. However, with that said, the quality is very close.
Ok, thanks man!


On the plus side, SOG PowerLock MTs didn't suffer much when they changed country of origin. So that's a BIG plus. :)
Congrats on the BO PowerLock! They are a real workhorse and look quite nice as well! :)Thanks brother! The quality on this one does seem really good. I haven't had a chance to really try it out yet, but am going to this weekend


-
Some nice Powerlocks pictured here!
Been on the lookout for what I believe is a transitional Powerlock. USA handles/frames with non-USA(possibly) redesigned plier head. Plus the SOG going around the pivot is cool. :)
Finally found one for cheap.
Pictured next to the USA marked Powerlock and pictures with some of the SOG stable.



-
I'm in, mine should be in by Friday

-
@_MattGyver_ said:
I'm in, mine should be in by Friday

Welcome to the PL club, MattGyver!

Which version do you have on the way? -
I'm in, mine should be in by Friday

Welcome to the PL club, MattGyver!

Which version do you have on the way?The satin V-Cutter :D
-
I'm in, mine should be in by Friday

Welcome to the PL club, MattGyver!

Which version do you have on the way?The satin V-Cutter :D
that was my first SOG too

-
I'm in, mine should be in by Friday

Welcome to the PL club, MattGyver!

Which version do you have on the way?The satin V-Cutter :D
Tough to beat that design! Hope you enjoy it!

-
Congrats you two!
-
Thanks, ducttapetech!
PowerLock is accompanying the 110 challenge knife today.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login