First AA flashlight suggestions?
-
Fenix LD09 any good? I've got the older model which has a fairly bright low mode, but the newer (2015) model is 3 lm.
-
Holy heck, I was just going to suggest you have another look at the Thrunite T10 but it doesn't seem to be available now! :ahhh My personal favourite 1xAA light, in fact my favourite light of all and the one that's in my pocket right now, is the Eagletac/Eagtac D25A Clicky. Available with a Nichia 219 LED for your high CRI requirements.
Seconded! Great little light. Always there, always works. I like the UI too.

Looks like a good light...

Satisfies desires also....
But I don’t think that I want it.
Thanks for the suggestion though.
I’ll keep in mind if I want a hand light.@hiraethus said:
Fenix LD09 any good? I've got the older model which has a fairly bright low mode, but the newer (2015) model is 3 lm.Not low enough I think. :-[
Thanks anyway!
I think that the high CRI requirement is optional...
And I think that I’d prefer a head light over a hand light.
So far I like the specs of the Thrunite TH20 NW best.
Does anyone have head light suggestions? -
I just got a lumintop tool AA for some ridiculous low price with amazon lightning deal and there is a $3 coupon on the amazon page as well, another quality light, very small and, lightweight,can take a 14500 Li-on and hit 550 lumens, comes with a silicone glow in the dark diffuser, clip, lanyard and spare tailcap to make it a twisty if you want, will post some pics later but this is a great light, 3 modes
-
My only modern headlight is a Fenix HL22 I got on sale from Amazon. Now discontinued I think and not quite what you are looking for anyway. Suits me quite well though.
-
oh, as per usual I only read last few posts, I got a nice skillhunt H03 with NW does 1200 lumens has bead optic diffuser built in, 18650 battery, if thats no good theres the olight H1 nova, kinda the same but smaller uses cr123 or Li-on. but if you dont want recharchables there are some decent energizer models that take AAA and are pretty decent and inexpensive.
-
Soon I will have too many AA and AAA eneloops to use all at once. :D I'd like to use them as I don't have any good (protected or otherwise) 18650 batteries to use in a hypothetical new 18650 light.
BUT, I have a "hobby charger" that I use for my RC hobby batteries that can accommodate any Li-ion (not to mention NiMH, LiFe and Lead acid
) battery within a certain size (It should be able to charge single batteries or battery packs up to laptop size. :o :ahhh ) so the only extra cost associated with getting a flashlight that takes a strange li-ion battery size ought to be the battery itself. -
@Gareth said:
My only modern headlight is a Fenix HL22 I got on sale from Amazon. Now discontinued I think and not quite what you are looking for anyway. Suits me quite well though.Hmmm... Between handheld or head mounted, which do you find more useful?

The Lumintop looks nice, but I don't think that the lowest mode is low enough, and I'd prefer a headlamp, I think, for more hypothetical versatility?

The likes of the skill hunt H03 and Olight H1 are too overkill for me. :D
You're talking to someone who thinks that the $20 Ti3 is the cats meow, the bee's knees, etc.
The likes of the Thrunite TH20 don't seem to have many fancy functions like magnetic charging, but I don't feel the need for that.... At least not yet. -
check out the energizer brand headlights then, I use them everyday, good bang for your buck.
I had gotten the skillhunt for $25ish from grrbest a few months ago, so it can be had for a decent price,
-
@Blackbeard said:
I just got a lumintop tool AA for some ridiculous low price with amazon lightning deal and there is a $3 coupon on the amazon page as well, another quality light, very small and, lightweight,can take a 14500 Li-on and hit 550 lumens, comes with a silicone glow in the dark diffuser, clip, lanyard and spare tailcap to make it a twisty if you want, will post some pics later but this is a great light, 3 modesYou beat me to it. I do not own the AA version, but given the quality of the AAA and most Lumintop products I wouldn't expect less. Price is around $18 on some online Chinese stores.
-
I just got a lumintop tool AA for some ridiculous low price with amazon lightning deal and there is a $3 coupon on the amazon page as well, another quality light, very small and, lightweight,can take a 14500 Li-on and hit 550 lumens, comes with a silicone glow in the dark diffuser, clip, lanyard and spare tailcap to make it a twisty if you want, will post some pics later but this is a great light, 3 modes
You beat me to it. I do not own the AA version, but given the quality of the AAA and most Lumintop products I wouldn't expect less. Price is around $18 on some online Chinese stores.
Im really liking it, got the black version, not sure why the lanyard is royal blue colored tho, it also came with a AA battery and neat magnetic latching case.
-
@Pablo O'Brien said:
My only modern headlight is a Fenix HL22 I got on sale from Amazon. Now discontinued I think and not quite what you are looking for anyway. Suits me quite well though.
Hmmm... Between handheld or head mounted, which do you find more useful?

The Lumintop looks nice, but I don't think that the lowest mode is low enough, and I'd prefer a headlamp, I think, for more hypothetical versatility?

The likes of the skill hunt H03 and Olight H1 are too overkill for me. :D
You're talking to someone who thinks that the $20 Ti3 is the cats meow, the bee's knees, etc.
The likes of the Thrunite TH20 don't seem to have many fancy functions like magnetic charging, but I don't feel the need for that.... At least not yet.When out camping then a headlamp is king without a doubt, but outside of that I rarely use one. Another option is getting a headband that holds your torch, something like the Skilhunt HB1.
-
@Pablo O'Brien said:
My only modern headlight is a Fenix HL22 I got on sale from Amazon. Now discontinued I think and not quite what you are looking for anyway. Suits me quite well though.
Hmmm... Between handheld or head mounted, which do you find more useful?

The Lumintop looks nice, but I don't think that the lowest mode is low enough, and I'd prefer a headlamp, I think, for more hypothetical versatility?

The likes of the skill hunt H03 and Olight H1 are too overkill for me. :D
You're talking to someone who thinks that the $20 Ti3 is the cats meow, the bee's knees, etc.
The likes of the Thrunite TH20 don't seem to have many fancy functions like magnetic charging, but I don't feel the need for that.... At least not yet.When out camping then a headlamp is king without a doubt, but outside of that I rarely use one. Another option is getting a headband that holds your torch, something like the Skilhunt HB1.

I think that I'll get a few of those in addition to whatever light I get.
-
Seems obvious, but I find a headlight handy for anything you know you'll need two hands for. Camping, rummaging in the attic, fixing bikes by the side of the road, furtling around in an engine bay, that sort of thing - so I usually have one (an older Petzl Tikka, I think) if I know I'd going to be doing anything like that. . But for most day-to-day use, a normal AA or AAA pocket light is more convenient.
-
I just got a lumintop tool AA for some ridiculous low price with amazon lightning deal and there is a $3 coupon on the amazon page as well, another quality light, very small and, lightweight,can take a 14500 Li-on and hit 550 lumens, comes with a silicone glow in the dark diffuser, clip, lanyard and spare tailcap to make it a twisty if you want, will post some pics later but this is a great light, 3 modes
You beat me to it. I do not own the AA version, but given the quality of the AAA and most Lumintop products I wouldn't expect less. Price is around $18 on some online Chinese stores.
Im really liking it, got the black version, not sure why the lanyard is royal blue colored tho, it also came with a AA battery and neat magnetic latching case.
Good to know you're liking it! The royal blue lanyard could be a mistake, they just released the Tool in red, purple and blue.
-
Am I over thinking things?
I want to get and use stuff that will last long enough to become sentimental, etc. You know, like SAKs.

That involves making sure that I won't irreparably damage them on the way to the 10 year, 20 year, 1000 year goal. ::)But I'm also extending that line of thinking to my Ti3, and... my eneloops.

I mean, thinking like this about a cheap flashlight is bad enough, but batteries?!
Back to the Ti3... That involves thinking about how it might fail, a tragic accident or manufacturer defect aside.
The batteries are probably NOT going to be a failure mode, the LED should last for a very long time, etc etc.It seems that the most likely failure mode that puts it out of service is to do with the twisty threads or the LED driver circuit board, unless I'm missing something.
In case of circuit board failure, it SEEMS like I might be able to fix it or rustle up/make a replacement if I learn the skillzzzzz.I don't think that I could ever fix the threads if they wear out though. ::)
So yeah... How much use should I expect to get out of the anodized aluminium threads, assuming no overstressing/abuse, and decent lubrication? Big question I know, buy this is MTO.
And if you were choosing a keychain light for the long long long long haul, to possibly pass on to the generation after the generation coming after the next generation, what would you pick?
-
The Fenix E01 has a reputation for being rugged and durable.
-
That makes me wonder what makes it durable. :D
-
@Pablo O'Brien said:
That makes me wonder what makes it durable. :DPossibly nothing at all, but if there's anything too it then it's simplicity.
-
most of the AAA keylight size lights take the most abuse in my collection, falling/dropping, annodizing wears down from scraping keys and vic classic, but I have never seen one fail yet, they are tough little buggers
-
@Blackbeard said:
most of the AAA keylight size lights take the most abuse in my collection, falling/dropping, annodizing wears down from scraping keys and vic classic, but I have never seen one fail yet, they are tough little buggersIndeed. :D
I sometimes give my Ti3 a quick wash under a running tap, and the water never gets inside.
If the twisty ones have a failing, it’s that you can sometimes over tighten the head. :ahhh
It tends to be caused by the person you lend the light to.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login