Wave Plus? Charge Plus?
-
I also noticed that there are now 3 variations of the blade
420HC
154CM
S30V -
No way!
Not paying those prices.
You can get a Rebar for $60 with replaceable cutters!

Just another way to rise up the prices... -
@Etherealicer said:
I also noticed that there are now 3 variations of the blade420HC
154CM
S30VWas always the case (well, after the TTi was released, at least). 420 on the Wave, 154cm on the AL/ALX/Ti and S30V on the TTi
-
I also noticed that there are now 3 variations of the blade
420HC
154CM
S30VWas always the case (well, after the TTi was released, at least). 420 on the Wave, 154cm on the AL/ALX/Ti and S30V on the TTi
Ah, wasn't aware of that... VICTORINOX FOREVER

-
@Etherealicer said:
BladeHQ is often early with releases, they seem to be well connected. Considering the recent crack down of LM on TTC, I doubt that BladeHQ would not mention if they were after factory mods. And they explicitly state 25 years warranty.At any rate, if this is a LM release then they address two requests:
- replaceable wire cutters (as long as they maintain the version without, everybody should be happy)
- better sheath (or at least a new one)
I have a feeling these will replace the original models entirely. Two reasons: they are the same price as the originals. And the originals are out of stock on leathermans website. That suggests to me they are selling out the old stock and building inventory for when the new model drops.
Athough I own Skeletools and Juices, I've been holding off on Wave/Charge because I want the replaceable cutters. This will push me over the top on buying one. It's a smart move on their part. Apparently it's already in stock on Blade HQ?!? So LM makes the announcement at Shot Show and the old models are replaced instantly.
-
I never seen pliers heads like thoes, and they are not something someone can mod, so I am guessing that the 2018 new release.



-
I like the Charge AL one with the new cutters!
Did anyone ask BladeHQ what the story is with these models then?
-
They looks like bad Photoshop pics to me ??? I guess we will hear more about these at SHOT if they are for real
I like having different options but the prices are already on the upper end of what I want to pay for new
If they go up even more then they will likely lose many over the price alone :ahhh Good find either way 
-
Its about time LM put those replaceable cutters on all their medium to heavy duty MTs, methinks

-
I'd rather have the Rebar head and lose some material off the scissors handle, instead of these heads.
Which might happen once these start breaking on people. -
Calling them plus models seems wrong when the cutters are standard on things like the Rebar. Maybe it should be the Wave 2018 or New Wave etc. Course by having a plus it gives you an excuse to charge more for a standard feature and have both the non replaceable and the new ones sold separately at probably different price points.
Sent from my SM-T377V using Tapatalk
-
@David Bowen said:
Calling them plus models seems wrong when the cutters are standard on things like the Rebar. Maybe it should be the Wave 2018 or New Wave etc. Course by having a plus it gives you an excuse to charge more for a standard feature and have both the non replaceable and the new ones sold separately at probably different price points.Sent from my SM-T377V using Tapatalk
I agree David :-\
-
I just noticed that the Charge AL has a gut hook. Hmmm
-
Calling them plus models seems wrong when the cutters are standard on things like the Rebar. Maybe it should be the Wave 2018 or New Wave etc. Course by having a plus it gives you an excuse to charge more for a standard feature and have both the non replaceable and the new ones sold separately at probably different price points.
Sent from my SM-T377V using Tapatalk
I agree David :-\
We learned with the Skeletool KB, Juice B2, etc that Leatherman is all about squeezing more Benjamin's. I hope 2018 is a different year for them and something good comes to light.
Sent from my SM-G935V using Tapatalk
-
Calling them plus models seems wrong when the cutters are standard on things like the Rebar. Maybe it should be the Wave 2018 or New Wave etc. Course by having a plus it gives you an excuse to charge more for a standard feature and have both the non replaceable and the new ones sold separately at probably different price points.
Sent from my SM-T377V using Tapatalk
I agree David :-\
We learned with the Skeletool KB, Juice B2, etc that Leatherman is all about squeezing more Benjamin's. I hope 2018 is a different year for them and something good comes to light.
Sent from my SM-G935V using Tapatalk
I think these revised models come better equipped for the same price. Better sheath, replaceable cutters and it looks like it the Charge AL comes with a bit kit and clip included (not just the TTI). I predict the original non-cutter models are going away, they are sold out at the Leatherman web store. Plus the older models on BladeHQ are listed at $169.85. In retail that's sometimes shorthand for a discontinued product, prices usually end in 99 or 95. Of course this is speculation, but the fact they are the same price as the old models is another big factor too.
-
This just in. The photos are still of the older model but it lists the replaceable cutters. Also its in stock already.
-
I do suspect that some one jumped the gun. I think this would actually be launched at Shot show.
Sent from my iPhone using Tapatalk
-
Calling them plus models seems wrong when the cutters are standard on things like the Rebar. Maybe it should be the Wave 2018 or New Wave etc. Course by having a plus it gives you an excuse to charge more for a standard feature and have both the non replaceable and the new ones sold separately at probably different price points.
Sent from my SM-T377V using Tapatalk
I agree David :-\
We learned with the Skeletool KB, Juice B2, etc that Leatherman is all about squeezing more Benjamin's. I hope 2018 is a different year for them and something good comes to light.
Sent from my SM-G935V using Tapatalk
I think these revised models come better equipped for the same price. Better sheath, replaceable cutters and it looks like it the Charge AL comes with a bit kit and clip included (not just the TTI). I predict the original non-cutter models are going away, they are sold out at the Leatherman web store. Plus the older models on BladeHQ are listed at $169.85. In retail that's sometimes shorthand for a discontinued product, prices usually end in 99 or 95. Of course this is speculation, but the fact they are the same price as the old models is another big factor too.
It looks like the original models are in stock on Leatherman's website again. Yesterday all these models said "out of stock". Perhaps there was some maintenance being done on the page. Plus I'm seeing .85 cents on some of the other Leatherman tools on US Amazon, that might be the lowest MAP price they can list them at and not an indicator of being discontinued. If they keep the old models that would be great, even better the new models aren't any more expensive. Hopefully we'll get the full story soon.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
