Let me see your homemade sheaths!
-
Nice sheaths everyone, looks like I will have to try some leatherwork myself someday [emoji106]
Sent fra min FRD-L09 via Tapatalk
Best of luck, it’s fun yet stressful, easy yet hard and yet all at the same time, fig that out.. but well worth it in the end..
JRI can only imagine. Do you have any pointers for a newbie?
Sent fra min FRD-L09 via Tapatalk
-
Nice sheaths everyone, looks like I will have to try some leatherwork myself someday [emoji106]
Sent fra min FRD-L09 via Tapatalk
Best of luck, it’s fun yet stressful, easy yet hard and yet all at the same time, fig that out.. but well worth it in the end..
JRI can only imagine. Do you have any pointers for a newbie?
Sent fra min FRD-L09 via Tapatalk
I’m not the best, but as for tips, it pretty much depends on how or what your going to do?
If stitching with a large needle, use something to push it through, over time the fingers are going to be VERY sensitive!
Forming, make sure you use plenty of extra, makes it much more easier and it can always be cut off,
Oh a little trick I like, if punching holes for the stitching, you can also use a dremel/ rotary tool with a very small bit 10times more easy, you don’t have to push so hard! Hope this helps..
JR -
Nice sheaths everyone, looks like I will have to try some leatherwork myself someday [emoji106]
Sent fra min FRD-L09 via Tapatalk
Best of luck, it’s fun yet stressful, easy yet hard and yet all at the same time, fig that out.. but well worth it in the end..
JRI can only imagine. Do you have any pointers for a newbie?
Sent fra min FRD-L09 via Tapatalk
I’m not the best, but as for tips, it pretty much depends on how or what your going to do?
If stitching with a large needle, use something to push it through, over time the fingers are going to be VERY sensitive!
Forming, make sure you use plenty of extra, makes it much more easier and it can always be cut off,
Oh a little trick I like, if punching holes for the stitching, you can also use a dremel/ rotary tool with a very small bit 10times more easy, you don’t have to push so hard! Hope this helps..
JRThanks [emoji106] I have started to get some needles and stuff and I have a piece of leather thats supposed to be a knife sheath eventualy so I just have to sit down and try someday.
Sent fra min FRD-L09 via Tapatalk
-
[quote author=RF52 link=topic=74435.msg1605750#msg1605750 date=1514064105]
Nice sheaths everyone, looks like I will have to try some leatherwork myself someday [emoji106]Sent fra min FRD-L09 via Tapatalk
Best of luck, it’s fun yet stressful, easy yet hard and yet all at the same time, fig that out.. but well worth it in the end..
JRI can only imagine. Do you have any pointers for a newbie?
Sent fra min FRD-L09 via Tapatalk
I’m not the best, but as for tips, it pretty much depends on how or what your going to do?
If stitching with a large needle, use something to push it through, over time the fingers are going to be VERY sensitive!
Forming, make sure you use plenty of extra, makes it much more easier and it can always be cut off,
Oh a little trick I like, if punching holes for the stitching, you can also use a dremel/ rotary tool with a very small bit 10times more easy, you don’t have to push so hard! Hope this helps..
JRThanks [emoji106] I have started to get some needles and stuff and I have a piece of leather thats supposed to be a knife sheath eventualy so I just have to sit down and try someday.
Sent fra min FRD-L09 via Tapatalk
[/quote]
No prob, like I said I’m not great but if you have any questions don’t hesitate to pm me..
JR -
[quote author=MadPlumbarian link=topic=74435.msg1605761#msg1605761 date=1514066699]
[quote author=RF52 link=topic=74435.msg1605750#msg1605750 date=1514064105]
Nice sheaths everyone, looks like I will have to try some leatherwork myself someday [emoji106]Sent fra min FRD-L09 via Tapatalk
Best of luck, it’s fun yet stressful, easy yet hard and yet all at the same time, fig that out.. but well worth it in the end..
JRI can only imagine. Do you have any pointers for a newbie?
Sent fra min FRD-L09 via Tapatalk
I’m not the best, but as for tips, it pretty much depends on how or what your going to do?
If stitching with a large needle, use something to push it through, over time the fingers are going to be VERY sensitive!
Forming, make sure you use plenty of extra, makes it much more easier and it can always be cut off,
Oh a little trick I like, if punching holes for the stitching, you can also use a dremel/ rotary tool with a very small bit 10times more easy, you don’t have to push so hard! Hope this helps..
JRThanks [emoji106] I have started to get some needles and stuff and I have a piece of leather thats supposed to be a knife sheath eventualy so I just have to sit down and try someday.
Sent fra min FRD-L09 via Tapatalk
[/quote]
No prob, like I said I’m not great but if you have any questions don’t hesitate to pm me..
JR
[/quote]Thanks!Sent fra min FRD-L09 via Tapatalk
-
@MadPlumbarian said:
Here’s one I made a while back from scratch, not the best but it worked.. there’s a few others but I can’t find the pics, I suppose I could take new pics if I can find them.
JRreally like that JR

-
Nice sheaths everyone, looks like I will have to try some leatherwork myself someday [emoji106]
Sent fra min FRD-L09 via Tapatalk
Best of luck, it’s fun yet stressful, easy yet hard and yet all at the same time, fig that out.. but well worth it in the end..
JRI can only imagine. Do you have any pointers for a newbie?
Sent fra min FRD-L09 via Tapatalk
Buy cheap leather to work out patterns on before trying an idea on expensive stuff unless you're sure of yourself. I use my leatherman all the time to pull the needle through the leather, far easier on my fingers. Measure out more thread than you think you need, thread is cheap, far cheaper than your time having to undo an entire line of stitching and redoing it because you guessed wrong. Use a very sharp thin knife to cut the leather for a clean cut.
-
Nice sheaths everyone, looks like I will have to try some leatherwork myself someday [emoji106]
Sent fra min FRD-L09 via Tapatalk
Best of luck, it’s fun yet stressful, easy yet hard and yet all at the same time, fig that out.. but well worth it in the end..
JRI can only imagine. Do you have any pointers for a newbie?
Sent fra min FRD-L09 via Tapatalk
Buy cheap leather to work out patterns on before trying an idea on expensive stuff unless you're sure of yourself. I use my leatherman all the time to pull the needle through the leather, far easier on my fingers. Measure out more thread than you think you need, thread is cheap, far cheaper than your time having to undo an entire line of stitching and redoing it because you guessed wrong. Use a very sharp thin knife to cut the leather for a clean cut.
Great tips everyone! Much appreciated!
Sent fra min FRD-L09 via Tapatalk
-
Some great ideas and wonderful sheaths in this thread. Thank you for the tips MadPlumbarian and pomsbz. MadPlubarian and Vadim - very very nice.
John.
-
Nix made this awesome, open top low profile sheath for the 110 he sent to me

retention is superb, material well treated and crafted and the construction very solid

also allows for concealment and avoiding trouble, but still having the knife easily accessible


this is what I call an ideal sheath for the 110


-
Very nice

JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login







