An Aquatic Huntsman
-
This post reports on my first SAK mod, and a modest one at that, to get some experience in the various steps of the process as well as with the use of peening tools. The starting point is a black-scaled Swiss Champ that I managed to find brand new in the Bay at a good price (some would call it a bargain at about 60% of local MSRP).
The end product is what amounts to a Huntsman plus the fish scaler (hence the name in the title) and a full complement of back tools identical to the Swiss Champ's, i.e. including the chisel and small screwdriver. This results in the highest tool density possible - none of the back slots is occupied by just a spring :D. I'm really a bit proud of that.
One advantage of slimming down a SAK is that one can use the original pivots to great advantage, which I did here. Just in case I wouldn't have been able to, I did stock up on 2.5 and 2.2 mm brass rod, but did not have to use it in the end.
Curious as to why I would slim down a perfectly functional Swiss Champ? For one, I already have an SC, but not yet a Huntsman or anything that size. In addition, the tools I removed are going to be needed for another little project of mine. Patience my friends - more about this in the next episode.
Pics say more than 1000 words, so here goes:
De-scaling, so to speak. I soaked the SC in hot water before using the small blade on the other SC to gently pry the scales off. Then I used the auto centre punch to mark where the drill would be applied on the pivots.

Drilling. I used a cordless Bosch with 2.5 mm bit for the big pivots and 2 mm for the small ones - worked well. Make sure the brass bushings stay intact, we'll need them later.


Disassembly is straightforward so I won't show it. Make sure you lay the pieces in the sequence they came off.
The next pic shows the reassembled Aquatic Huntsman prior to cutting the pivots to length (I used 1.5 mm over the baseline, i.e. liner or bushing).

Peening in progress. This was much easier than I had expected...

Peening completed.

After this I soaked the scales and the tool in hot water again, then applied the scales in their almost correct positions, wrapped all in an old T shirt and clamped it in a vise for 5 minutes. The pic below shows the completed tool and the bits I took out. Operation completed, and as far as I can determine, succesful!

A practical addition to my collection
and worth it for the experience. -
Fantastic mod DT
Love that you have all the back tools - can we get a pic of the back with all the tools closed please? Brilliant work! 
-
Very cool

-
Is it a Ranger with fish scaler instead of the metal file?
I love it!
8) -
Thanks guys

Close-up pics follow:


-
Nice work and careful peening DT

-
Nice! And Awsome writeup
[It's not failure if you learn something from it]
-
@Sparky415 said:
Nice work and careful peening DT
Thanks... Ah... about that... I was quite lucky. In one of the pics you will see I have the bushing on the wrong middle pivot. This almost got me to cut off said pivot way short. I noticed in time... I'm happy with the overall result though. But due to the bushings these are easy to do with a flat faced hammer. I might need to gain more expertise for Alox models...
-
Nice.

-
Very nice.

-
-
nicely done!

-
Congrats on your first mod, DT

-
Great job!!!
-
Jobs is a good'un

The sight of the bushing on the backspring pivot had yelling "WATCH OUT" at the screen. Luckily my worries were laid to rest when I saw the picture of the finished work.

- Tom
-
Thanks guys

Yup, caught the mistake just in time as I was about to put the cutting disc to the pivot

-
Great mod
Love all the pics and looks like a great job DT

-
Awesome work D_T. Love the peening

Sent from my iPhone using Tapatalk
-
Nicely done

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
