Wave Plus? Charge Plus?
-
I do suspect that some one jumped the gun. I think this would actually be launched at Shot show.
Sent from my iPhone using Tapatalk
-
Calling them plus models seems wrong when the cutters are standard on things like the Rebar. Maybe it should be the Wave 2018 or New Wave etc. Course by having a plus it gives you an excuse to charge more for a standard feature and have both the non replaceable and the new ones sold separately at probably different price points.
Sent from my SM-T377V using Tapatalk
I agree David :-\
We learned with the Skeletool KB, Juice B2, etc that Leatherman is all about squeezing more Benjamin's. I hope 2018 is a different year for them and something good comes to light.
Sent from my SM-G935V using Tapatalk
I think these revised models come better equipped for the same price. Better sheath, replaceable cutters and it looks like it the Charge AL comes with a bit kit and clip included (not just the TTI). I predict the original non-cutter models are going away, they are sold out at the Leatherman web store. Plus the older models on BladeHQ are listed at $169.85. In retail that's sometimes shorthand for a discontinued product, prices usually end in 99 or 95. Of course this is speculation, but the fact they are the same price as the old models is another big factor too.
It looks like the original models are in stock on Leatherman's website again. Yesterday all these models said "out of stock". Perhaps there was some maintenance being done on the page. Plus I'm seeing .85 cents on some of the other Leatherman tools on US Amazon, that might be the lowest MAP price they can list them at and not an indicator of being discontinued. If they keep the old models that would be great, even better the new models aren't any more expensive. Hopefully we'll get the full story soon.
-
@genevabuck said:
I just noticed that the Charge AL has a gut hook. HmmmAlso the Charge AL Plus has no metal inlay on the scales anymore. Couldn't figure out why it looked so weird at first.
-
When is the SHOT Show this year?
-
Smells like a pre-order to me. Or they got Lot 0 and are opening their mouths before SHOT which will make LM so perky.
-
Basically did same mods to my edc Wave and sheath a couple of years ago plus added the Wingman scissors :D

-
@JustinCase said:
Basically did same mods to my edc Wave and sheath a couple of years ago plus added the Wingman scissors :D

Time traveller? Should have gotten a patent for that!

-
Maybe a Mini Surge is not too far away

-
Had a gift card burning a whole in my pocket, ordered the black wave plus.

We will see if it’s a bust or not. :-\ I sure hope it isn’t.
Will update.
-
I was browsing the web today and saw this too. I thought about posting it here but thought it was old news. Smoky Mountain also have the plus option.
-
wow, have not heard about it. ???
I think we have to wait until SHOT 2018 to see if it is real. But i doubt they are already in stock even before any presentation?!
-
After asking for the those three "specific models" of LM multi-tools PLUS version, I received an email from HQ Costumer Service with the following response which, by the way, still does not answered my question related to the PLUS

"Thank you for your inquiry. Yes all of the Leatherman products we have are legitimate as we receive them all from Leatherman directly. You can also try contacting Leatherman to verify our active dealer status with them"
**Please let me know if you have any further questions or concerns.
Thank you,
Seth L.
Customer Service Representative** -
I don't like the look of that replaceable cutter set-up. The wall is too thin. They can improve it a bit by adding a bevel on the lower outer edge of the blade, and leave extra material on the plier to fill that void.
-
Well...I ordered a Charge Plus. Curious if they’re are any other changes.
Sent from my iPad using Tapatalk
-
@chrono said:
I don't like the look of that replaceable cutter set-up. The wall is too thin. They can improve it a bit by adding a bevel on the lower outer edge of the blade, and leave extra material on the plier to fill that void.I would think there's no need for the cutter to be so tall. It's a huge chunk of metal there. I dun think the top part is contributing to the the strength of the cutter at all.
-
It's nice to see Leatherman continuing their longstanding tradition of producing tools that members here have already made. :D
Which I am certain were a process of "simultaneous development" and were not ideas sourced from here, naturally....

Def
-
@Grant Lamontagne said:
It's nice to see Leatherman continuing their longstanding tradition of producing tools that members here have already made. :DWhich I am certain were a process of "simultaneous development" and were not ideas sourced from here, naturally....

Def
Not that they would ever admit it ;)
-
@Grant Lamontagne said:
It's nice to see Leatherman continuing their longstanding tradition of producing tools that members here have already made. :DWhich I am certain were a process of "simultaneous development" and were not ideas sourced from here, naturally....

Def
Is this really a fair criticism?
With a few exceptions, the members are making things from existing Leatherman design and parts, while it is cool they mod their own tools, they're not exactly being totally original or anything.
I see this with guitars. Players have been modding their own guitars for decades. Fender might come out with a hybrid of their own designs and then people say they ripped off the modders, but did they? Doesn't a company have the right to do whatever they want with their own models and parts. Unless I'm mistaken, were people putting carbide cutters on these tool before Leatherman had them on another model? That would be somewhat impressive, but swapping plier heads on models that already exist and are similar enough while that is neat, it's not exactly Skunkworks r&d.
There is a long history of companies being inspired by their customer base, that is a good thing not an exploitation in my opinion. Part of any business is figuring out what your customer base wants. If the customer base shows hints that they want something, can you blame the company for making it. When the car culture was putting big engines in a light car, and Ford and others said hey people want this, was Ford wrong somehow for making a car the public wanted.
-
Yes, but if they would at least acknowledge where the ideas came from it would be something ;) Of course it might come down to money for an idea and they don't want that I am sure

They are basically saying we came up with the idea on our own without feedback from anyone :-\
Plus the blame game can go on to Gerber stole their PST design so they stole the carbide cutter design and changed the material then stole the MP600, basically changed a few things and called it the OHT ::)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
