Gerber Dime Screwdriver Mod
-
This is awesome. I may have to try this.
Sent from my Pixel using Tapatalk
-
First, don't worry about your english- most of us don't have the most amazing vocabulary here, and our grammer is meh. And our table manners are atrocious. You'll be fine.
Secondly... hubba-hubba! That mod is nice- I"m not a fan of the Dime, but taking it's limits into account this is an excellent mod. I'd normally worry about nylon in a use like this, but as you pointed out, this is not conductive to over torquing. While it does look a little rough, it also looks right for this particular tool- it looks nice and worn in, matches the rest of it. Is that a lock I see? The little tab we can see clearest in the 4th and 5th pictures, near the pivot. An excellent touch if it is, we don't normally see anything quite like that.
-
@benbergman said:
This is awesome. I may have to try this.Sent from my Pixel using Tapatalk
Thanks!
I uploaded the files on thingiverse: https://www.thingiverse.com/thing:2719278
The instructions are incomplete as of yet, but feel free to try, comment and ask if anything is unclear.@ironraven said:
First, don't worry about your english- most of us don't have the most amazing vocabulary here, and our grammer is meh. And our table manners are atrocious. You'll be fine.Secondly... hubba-hubba! That mod is nice- I"m not a fan of the Dime, but taking it's limits into account this is an excellent mod. I'd normally worry about nylon in a use like this, but as you pointed out, this is not conductive to over torquing. While it does look a little rough, it also looks right for this particular tool- it looks nice and worn in, matches the rest of it. Is that a lock I see? The little tab we can see clearest in the 4th and 5th pictures, near the pivot. An excellent touch if it is, we don't normally see anything quite like that.
Thanks! And yes, that's a lock! For now without any spring action though. At first i implemented it as a slipjoint but i quickly got annoyed by the driver closing itself while screwing. So a lock was a must have in the next iteration.
So far i didn't notice any awful table manners. Every comment was nice so far. But i'll brace myself for the future ^^
-
Wow! Superb mod! Most impressive.
-
Would love to see you do this on a Leatherman Micra :D
If possible at all.
Really neat work!
-
@ChrisEDC247 said:
Wow! Superb mod! Most impressive.Thanks a lot!
@Mechanickal said:
Would love to see you do this on a Leatherman Micra :D
If possible at all.
Really neat work!
If someone would send me one, used or new, i'd try to adapt it to the micra for sure. Or perhaps the p4/ps4. Looking on ebay for a ps4 as a direct comparison to the dime right now. But not so many used offers here in germany and i dont wanne buy a brandnew ps4 to tinker with. As far as i know id have to drill out the rivets and replace them with pivot barrels + screws.
-
Wow! Superb mod! Most impressive.
Thanks a lot!
@Mechanickal said:
Would love to see you do this on a Leatherman Micra :D
If possible at all.
Really neat work!
If someone would send me one, used or new, i'd try to adapt it to the micra for sure. Or perhaps the p4/ps4. Looking on ebay for a ps4 as a direct comparison to the dime right now. But not so many used offers here in germany and i dont wanne buy a brandnew ps4 to tinker with. As far as i know id have to drill out the rivets and replace them with pivot barrels + screws.
You're in Germany and got pivot barrels + screws??

Now I'm thinking about sacrificing my Micra...
-
@Mechanickal said:
You're in Germany and got pivot barrels + screws??
Now I'm thinking about sacrificing my Micra...
...well, i don't have them personally. But there will probably be some solution to buy some (or sacrifice the dime ones...).
Do you happen to know the outer diameter of the pins in the Micra/PS4?Edit: https://www.youtube.com/watch?v=AlZnGJDGcog
this suggests that the micra can be unscrewed once the thread glues is softened up. Same as with the dime, just no screw socket to help. -
@vrunge said:
After a couple of weeks tinkering around, i came up with the design from above which fits my needs. Its printed in nylon on my el-cheapo china 3D printer. That way the torque i can get out of the bit driver is enough for the toolsize. (especially compared to the suitable usecases of the pliers) and if it ever breaks, i can just reprint it.Nice design!
I'm a big fan of using some metal bits to strengthen the prints, to put some sturdiness where you need it the most. If you find that something breaks easily, you could use a piece of thin metal tube and epoxy it around the bit holder. And if the stem breaks, you could use a bit of flat metal to strengthen it - if you keep the metal part simple, it can be relatively easily shaped with a metal saw / dremel / file. Then print the more complicated parts from plastic.
I also have a cheapo 3d printer around, but I didn't think about printing tool parts yet :P
-
I'm a big fan of using some metal bits to strengthen the prints, to put some sturdiness where you need it the most. If you find that something breaks easily, you could use a piece of thin metal tube and epoxy it around the bit holder. And if the stem breaks, you could use a bit of flat metal to strengthen it - if you keep the metal part simple, it can be relatively easily shaped with a metal saw / dremel / file. Then print the more complicated parts from plastic.
I also have a cheapo 3d printer around, but I didn't think about printing tool parts yet :P
Thanks for the tip! I might consider it in upcoming designs.
I shortly revisited my thought about modding the micra in a similar way. I think the squirt lineup makes for a better target. My solution replaces on of the dime scales. With the micra there are no scales and thus the space efficiency will go down.
I did buy a ebay ps4. Once it arrives i will try to mod it.
In the meanwhile i bought a vic classic which i took apart. The plan is to integrate my house key with the vic classic tools, an usb sick (kingston sdcard adapter) as well as a keychain prybar (china version of the wedgy bar)New topics may follow!
Best regards,
volka
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login