Wave Plus? Charge Plus?
-
Just received mine today. For me, having those cutters is huge. This will definitely share time with the rebar now. The outer walls do seem thin, but if it breaks, it will head back to be fixed. I’m not to worried about it. I know anything can happen, but I always try to use my MT’s appropriately. So hopefully it won’t be an issue.
This one came with the black molle sheath.
Nice knife, I am eyeing the Charge+. How is the new sheath?
The sheath is the same smaller black molle as they have had for awhile. To be honest, I’m not a big fan of it. I’ve had one wear out pretty quick. I think I’m going to use the older style, nylon rectangle one.
Thanks

As of last night, the wave was off LM’s site, just had the plus.
CORRECTION
They still have the black and silver wave, but not the bo or stainless.
-
Can anyone provide pics of the new sheath?
-
-
Everything you need to know on the Wave.
Including the new sheath overview
He notes the terrible QC, as expected.
-
@NKlamerus said:
Everything you need to know on the Wave.Including the new sheath overview
He notes the terrible QC, as expected.
Ten years late :facepalm:
-
@NKlamerus said:
Everything you need to know on the Wave.Including the new sheath overview
He notes the terrible QC, as expected.
the production model would have "+" stamped on scales. Hopefully the QC would be improved.
-
ALX is no more, the AL would have additional cutting hook on serrated blade. No other changes made.
-
LM Charge Plus
-
So I sent my wave in for warranty recently and it arrived at their facility the other day... Now I'm wondering if they're just going to replace it with the Wave+ because my current wave is technically no longer in production?
-
@Zezima said:
So I sent my wave in for warranty recently and it arrived at their facility the other day... Now I'm wondering if they're just going to replace it with the Wave+ because my current wave is technically no longer in production?I really doubt it, they have thousands of spare parts and they can often replace or put back tools that have been years out of the market.
When I sent my Surge (non replaceable cutters) for repairs it had been out of production for quite a bit, but even then they put on all the tools that were broken from the original old-Surge configuration but brand new and unused
-
So I sent my wave in for warranty recently and it arrived at their facility the other day... Now I'm wondering if they're just going to replace it with the Wave+ because my current wave is technically no longer in production?
I really doubt it, they have thousands of spare parts and they can often replace or put back tools that have been years out of the market.
When I sent my Surge (non replaceable cutters) for repairs it had been out of production for quite a bit, but even then they put on all the tools that were broken from the original old-Surge configuration but brand new and unused
Yeah that's kind of how I'm thinking too. With how popular the wave is, I'm sure they still have many parts and refurbished units that they ship out when people send their wave in for warranty. Oh well, I don't think the removable wire cutters are a huge deal. They're a nice addition, but not something I'd buy another wave for. I'd get a rebar if I buy another multitool.

-
Anybody else receive the wave plus with no + on the scales? LM shows wave + on the site, mine just says wave, with a little different lettering than the old.
Just curious
-
-
Ok, so it seems a lot of viewers are commenting on the removable wire cutters. i have only broken 1 plier head in my days, it was on a Gerber mp 400 and it snapped under minimal pressure while holding a small bolt while replacing the rubber stripping on an abrams tank front track guard/fender. So my question is, what exactly breaks when one has the replaceable wire cutter? Is it the possibility that the screw snaps off and the cutter come apart, or the plier head itself snapping at the thinnest point just above the cutters? They seem to be indented into the head a bit to relieve the stress on the screw. I have a rebar, surge and signal with them and havent had any problems with pliers etc. Or perhaps its a twisting/flexing that could strip out the screw over time?
I plan on getting both of them eventually, i have a self imposed ban on impulse buys, must sell one to buy one type of thing.
Also do the new sheaths have the horizontal carry option?
-
@Glockfan said:
Anybody else receive the wave plus with no + on the scales? LM shows wave + on the site, mine just says wave, with a little different lettering than the old.Just curious
They aren't done with production setup yet.
Sending out old frames with new plier heads just to fill demand at the moment
-
Anybody else receive the wave plus with no + on the scales? LM shows wave + on the site, mine just says wave, with a little different lettering than the old.
Just curious
They aren't done with production setup yet.
Sending out old frames with new plier heads just to fill demand at the moment
Thanks NK, I agree with you. I contacted LM, they wouldn’t give me a direct answer. They asked to see a pic, after seeing it, still no answer. They said I could send it in for replacement, but I told them nah nothings wrong with it. Just wondering.
Did see a YT vid of guy with the exact same thing, from Blade HQ. Think your right
-
I will be buying one of these new plus models in the relatively near future. The biggest reason I did not buy a Wave/Charge in the past was the pliers head, I had a Blast that did everything a Wave did minus the exterior blades. I think this will now be the perfect tool for when I need more than my Skeletool but don't want the weight of my Surge. It will replace my old Blast.
I was using the compare function on Leatherman's website and the comparing the Wave+, Charge+ and Charge+ TTI and in the pictures of them they are all nearly identical as far as blades and tools. Charges+/Charge+TTI has the gut hook the Wave does not but visual it appears all the same tool/blades. But when you look at the tables of features it shows that the Charge+ does not have scissors or the medium flat screw driver blade but instead has two large bit drivers (this is mirrored on the Charge+ page). Yet the video link earlier in the thread shows a Charge+ with the scissors and medium flat screw drive blade.
I am leaning towards the Black Oxide Wave+ but I really could make use of the gut hook so that draws me towards the Charge+ but I would not want to give up the scissors. It appears for now they are shipping Charge+ as pictured it will be interesting to see if they start shipping Charge+ as listed or if they correct the table.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


