Spirit 30 day Challenge with a few Early- early Birds
-
Follow-up:
Went and messed with the adjustment on one of the cabinets that was still not quite right. No issues with the Spirit driver.
Unintentionally, I over-torqued one of the adjusting screws--the enemy of good is better--and ended up partially stripping the screw, at which point the Phillip's driver slipped out. This would seem to be a case of operator error instead of poor tool design.
I think the recollected difficulty I mentioned before was due to the tricky angle required by working in the hinge corner of the cabinet.That leaves me without a clear preference between the Rebar driver and the Spirit driver, at this point. :-\
-
Great pics today guys
Lot of fair points on both sides as well
I haven't really had any problems with the Spirit but just feel the Rebar is on par with it 
-
Day 28 of 30
Used a pencil and tape measure some today so not much MT use
:D Got this pic while getting fuel on the way home from work 
2018-01-25_04-11-54 by Poncho 65, on Flickr -
Such Awesome News Mech... I'm elated you got your Spirit back.
DAY 16
RO system maintanance.![20180125_184442[8784].jpg](/assets/uploads/_imported_attachments/migrated/354674_20180125_184442%5B8784%5D.jpg)
-
Spirit day 16. :-[

-
Day 27
Kinda tired to think of puns and stories.
Replaced my cabinet's tiny legs with wheels. Took out some staples, too.Spoiler:


This is what the legs look like. They screw in embedded slots.
The back middle wheel was a bit wide for the wood.
I have wheels with smaller plates, but they are also shorter, so I decided to just screw in the wheel with three screws.Spoiler:

-
Glad you found your Spirit Nick

Sent from my iPhone using Tapatalk
-
Bah, I'm out (again ::)). As much as I love the Spirit and used it most days I just don't get the opportunities to take the good pics that I feel are necessary to participate in the monthly challenges. Keep it up you lot, you're doing a great job.

-
Day 28: More package opening duties.
-
Day 27
was a day in the park
-
Day 28:
Serviced a sliding gate today with new photocells and keypad.
Alot of driving compared to the amount of work though...

-
Day 17
This is how it rides on the belt. I'm using the version that is closed in one end, they also have one with two open ends but I like this one. It does however slides out a bit once in a while but that is not a problem.

[It's not failure if you learn something from it]
-
That's what Mechy used to think........

-
Day 29

-
Day 28:
I've been pocket carrying the Spirit for a couple of days now. While it is possible to do this, I find it does not ride as easily as a Rebar. I'm not sure why, perhaps because the handles splay out. I'm going to pocket carry it for the rest of the challenge.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login