Lynn's $10 MT Challenge
-
The $5 Challenge went so well, we're going again, this time with the exorbitant budget of $10 per tool!
I will be finding 10 tools for the challenge. They will cost more that $5, and not more than $10 all in, including shipping and tax, aiming closer to the $10 mark. If I get the tool as part of a lot (like from ebay, with multiple tools), I'll calculate the tool's value as best as I can, based on lowest prices for the same models new.
There will be new tools, and used tools. There will be full size plier tools, keychain size tools, and knife-based (Swiss Army or the like) tools.
I have known this was coming for pretty much an entire month, so I have had a good bit of time to both roam local pawn shops, and scour ebay. I was frankly amazed what could be had for $10.
I had to eliminate Used 3-layer Swiss Army knives from the competition, simply because it's so very easy to acquire them at the sub-$10 mark. IF you buy more than one, to split the cost of shipping, they're under $10 each through our very own MTO Store (shameless plug).
https://store.multitool.org/departments/-102victorinoxwenger-models-2layer-141.htmlI also came across a brand new Victorinox Classic SD, that was on clearance for $9.99... plus tax. But this means the Classic is almost available new for this price range.
It should also be noted that Multitool.org is footing the bill for the cost of these tools. If you find these activities amusing, maybe consider donating to the site to keep the fun going.
Now... let's see what Lynn could dig up...
-
First tool in the $10 MT Challenge is a brand new IDL T5!
</topic/75709
<a href="https://flic.kr/p/22Bmxft" target="_blank" rel="noopener noreferrer"><img src="https://farm5.staticflickr.com/4754/39125134035_b28af1b5d3_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
I love these challenges :ahhh
Thanks Lynn!

-
You are most welcome. I have to be honest. I'm starting to get to the point where it's more fun when the tool is terrible.
The ISL T5 was pretty excellent, which is neat to find a good new tool at this price, but... No bloody knuckles, and no swearing, so...


-
It's time I tell you all a tale. I call it... 'The tool review that almost was'.
Like Robocop (because all good stories are like Robocop, at least a little, aren't they?), I have a hidden directive.
Grant said get tools, and review them. But he said something ELSE, didn't he, my little sweets?
And that was... when I was done, I should see if I could recoup funds on my investment.I did. Some. I traded in 'Ruby' from the $5 Challenge, and some others, at a pawn shop.
But I had this big, neat plan, to take the the Aitor, the best find from the $5 Challenge, and get something cool for THIS challenge, because with it's under-$5 and shipping, I'd JUST squeak in for the cost of this challenge. Here's a link to the Aitor from the $5 Challenge.
</topic/75210But...
The Aitor sadly went MIA. The USPS first sent it to California, when it was supposed to go to Indiana. Then, when the package finally DID arrive, it looked like the Aitor had muscled up to the edge of that bubblewrapped mailer, and hulk-smashed right out.
So, what was GOING to be a trade, ended up with me paying for the tool instead.
But it was GOING to be in the review, by criminy.
And so I present, the tool review that almost was... The Leatherman Juice S2.
<a href="https://flic.kr/p/22Vz2zS" target="_blank" rel="noopener noreferrer"><img src="https://farm5.staticflickr.com/4625/39331267624_d5115c4b77_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
But Lynn, who's to say you didn't pay for each of the individual items in the parcel?

-
@WoodsDuck said:
But Lynn, who's to say you didn't pay for each of the individual items in the parcel?

Well, when you put it THAT way. :D
-
sorry about the Aitor Lynn...

-
That's alright. Stuff happens.
The next competitor, the Marbles Camp Knife!
</topic/75730<a href="https://flic.kr/p/23XJCxY" target="_blank" rel="noopener noreferrer"><img src="https://farm5.staticflickr.com/4632/40012131022_96d8759975_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
And, to top the Marble's version, here's a legitimate Camillus-made Mil-K knife for the competition...
</topic/75741<a href="https://flic.kr/p/23Zkjbw" target="_blank" rel="noopener noreferrer"><img src="https://farm5.staticflickr.com/4626/40030214642_3f7ab78747_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
@Lynn LeFey said:
First tool in the $10 MT Challenge is a brand new IDL T5!</topic/75709
<a href="https://flic.kr/p/22Bmxft" target="_blank" rel="noopener noreferrer"><img src="https://farm5.staticflickr.com/4754/39125134035_b28af1b5d3_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I do like IDL tools!
-
Another 'tool that almost was' for the record.
The only reason this tool didn't make the cut is... it's just not that interesting, frankly. After watching ebay for a month, tools like it can be had pretty readily at this price point. And it's not what I'd call a great tool.
I present to you a Colonial made camp knife, circa 1980. I'd be more specific, but i can find nothing on its model number or specific name so...

<a href="https://flic.kr/p/248whUn" target="_blank" rel="noopener noreferrer"><img src="https://farm5.staticflickr.com/4607/40122888541_302a5e6676_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Usually, we're all going on and on about the 'Chinese knock-offs'. Well, this is pretty clearly an American knockoff of the Swiss Army Knife. I don't even want to do a full review of it, but i'll give the short version. The blade is not very sharp, and I don't want to work hard enough to make it so. The can opener works as promised. The flathead is not ground thin enough to slot into a screw as received, but I fixed it with a file. The awl has the triple whammy of terrible. The tip is blunt, the retention in the open position is incredibly weak, and the edge is VERY sharp. My index finger has suffered enough from awls lately, thank you very much. The corkscrew is untested, but seems solid. The peening is through the relatively soft scales, so there's a lot of side to side play in the tools. Overall, I'd rather have the $4 Walmart SAK-knockoff, by far.
On a purely personal note, the advertising is for a place in Zanesville, Ohio. That's the next 'big' town over from where I grew up, and the nearest mall to me growing up. So sorta-kinda my stomping grounds.
After getting this tool, I started thinking about the Mil-K knife, which led me to getting the Marbles knife, which led me to getting the actual Camillus Mil-K knife.
This knife cost me $8.50 with shipping, won on ebay. If I had it to do over again, I would not get it, but I chalk it up as cost of education in pocket knives.
-
Next up, a legitimate contender, the Plier Wrench, the generic version of the 'Jeep H07', or 'Jeep Cretaceous'.
</topic/75808
<a href="https://flic.kr/p/FZSWM9" target="_blank" rel="noopener noreferrer"><img src="https://farm5.staticflickr.com/4619/26252894098_daa238b48b_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
@Lynn LeFey said:
Next up, a legitimate contender, the Plier Wrench, the generic version of the 'Jeep H07', or 'Jeep Cretaceous'.</topic/75808
<a href="https://flic.kr/p/FZSWM9" target="_blank" rel="noopener noreferrer"><img src="https://farm5.staticflickr.com/4619/26252894098_daa238b48b_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Also known as the Cattleman Cutlery Tool and in house here as the SpyderGuppie. :D
/topic/42161
/topic/24809
Nice find!
Def
-
@Lynn LeFey said:
Next up, a legitimate contender, the Plier Wrench, the generic version of the 'Jeep H07', or 'Jeep Cretaceous'.</topic/75808
<a href="https://flic.kr/p/FZSWM9" target="_blank" rel="noopener noreferrer"><img src="https://farm5.staticflickr.com/4619/26252894098_daa238b48b_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I posted a lengthy post on your thread about it (sorry!!) and compared it to the other one I have, the larger model with some differences,

hope it is useful to you or somebody else and prevents others to lose the wrench function as happened with mine.

-
The next contender to step into the ring is the Mossy Oak 11-in-1 Multitool.
</topic/75838
<a href="https://flic.kr/p/KfvHWZ" target="_blank" rel="noopener noreferrer"><img src="https://farm5.staticflickr.com/4667/28387571329_917bef0127_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
We have passed a threshold in this challenge.
From this point on, all of the tools are name-brand, and 'used'. Some are VERY used.
You are warned.
THERE WILL BE RUST!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




