Something to help you date your Vic SAKs based on tool evolution
-
@El Corkscrew said:
I'd like to make a diagram with only the evolution of Soldier tools as they are a little different...Oooo - That sounds like a good idea/project
:D ......... Shall I have a crack at it ??? - I'd use a similar template
- But possibly transpose the rows and columns as there are not too many tools - But several changes (ie dates)
I've been doing quite bit of work in the Wiki recently on the Solidiers - So the info is quite fresh in my mind
Or are you going to do it El C ?
Am definitely going to update and publish version VII of this one - in the next couple of weeks
- But possibly transpose the rows and columns as there are not too many tools - But several changes (ie dates)
-
Either way is cool with me. Your chart is pretty cool so if it's easier for you, go right ahead. :)
-
Well folks - I can’t believe its two years since I last published an update to this spreadsheet.
Nothing much happened for the first 18 months or so – But a lot has happened in the last six – So it’s time to issue ***Version viii ***- Which is a very significant version
More about that later – Here's a very high level summary of the changes …..-
We have a few new rows for some of the later years
-
We have a new column (the last one)
-
We also have ***several new tools ***(not in new columns !?) – See if you can spot them ??? ;)
-
Some formatting and usability changes

-
And quite a few date shifts from the previous versions

I have made refinements to the table using information from threads on this forum, other internet locations, and a little of my own research.
A big 'Thank you' to everyone who has contributed to date discussions on this forum – especially Jazzbass, whose knowledge never ceases to amaze, and El Corkscrew and all other contributors to this thread and others.This version is significant for the following reasons:
[list type=decimal]* We have deviated from a couple of well-known SAK dating resources: SAAMS and even Victorinox themselves, eg on external rivets, opener and corkscrew changes. This step was not taken lightly - However I believe the knowledge here is more accurate than these sources !! :o-
I can’t believe how much this spready has evolved over the years – Compare the first and last versions in this thread .…. however .…. This may well be the last version of the spreadsheet :o :'( As I can't imagine too many more changes
-
I am planning to put this version into SAKWiki. Mr. E requested this early in this thread – I think this version is possibly worthy – However it will be suitably disclaimed/explained – Not least of which because SAK dating is as much of an art as a science!! Please let me know if anyone has any objections to this!
As always feedback on all content most welcome
Here are the PDF and Jpeg versions …….
I hope they are useful***ENJOY *** :ahhh
📎 Vic Tool Evolution Ver viii.pdf
-
-
Wonderfull...
-
Good work Huntsman.

-
Excellent work, again!
May I add that scissors blade shape also slightly changed over the ages ?
:-) -
Awesome work Huntsman!
This needs to be my desktop background or a poster next to where I work on my knife DB :D
-
@El Corkscrew said:
Here are the revisions I offer for Vic cellidors:
Thanks El C - This is great to get some feedback on the dating table

I have inserted *some comments *after you suggestions - Can anyone else comment, confirm, or dispute - Mainly on the first two items !!
Please let us know ..........1968 Last year for Sharpened Bottle opener/scraper
*Hmm - That is a dramatic change - Current version and SAAMS says 1980 - Although with a ? - So they were not sure - Some evidence please ! *1971 No "PAT" on Can Opener
*Also is a dramatic change - Current version and SAAMS also says 1980? - Ditto ! *1973 - 5 to 4 turn corkscrew
*This is an interesting one and we mentioned it in ano thread - Makes much more sense to me as I have some SAKs which have alu tipped tweezers but four turns CS - Which is not possible according to SAAMS - I am happy to update that one *

Back layer phillips:
*Yes we also discussed this in ano thread - We have never seen a no file/no can key square SD - and SAAMS is a bit devoid of dates for the back SD - and we are all agreed on the 1992 date - So I am happy to update based on your dates *

1952 - 1968 square, file, no can-key
1968 -1980 square, no file, can-key
1980 - 1992 round, can key
1992 - present round no can keyDivot Repair tool - 1992- 04?
*Sure why not? I think I guessed the current end date in my table ! :o *Emblem Inlay on front scales - 80 Stainless Steel, before they were nickel/silver
Yep this is the date that is in the tableHi Huntsman.
I have a no file no can key square sd. It is on an elinox automobile. Similar to the middle one pictured here. http://www.sakhome.com/305357095
Maybe its an elinox quirk?
-
:o
awesome!

-
I think this tool-evolution spreadsheet, the tang stamp detail picture, the knife model evolution pictures, etc. should have a sticky thread pointing to them to make it easier to identify and date unknown knives we come across. I've used them a couple of times in the last month and they are indispensable.
-
@El Corkscrew said:
Here are the revisions I offer for Vic cellidors:
Thanks El C - This is great to get some feedback on the dating table

I have inserted *some comments *after you suggestions - Can anyone else comment, confirm, or dispute - Mainly on the first two items !!
Please let us know ..........1968 Last year for Sharpened Bottle opener/scraper
*Hmm - That is a dramatic change - Current version and SAAMS says 1980 - Although with a ? - So they were not sure - Some evidence please ! *1971 No "PAT" on Can Opener
*Also is a dramatic change - Current version and SAAMS also says 1980? - Ditto ! *1973 - 5 to 4 turn corkscrew
*This is an interesting one and we mentioned it in ano thread - Makes much more sense to me as I have some SAKs which have alu tipped tweezers but four turns CS - Which is not possible according to SAAMS - I am happy to update that one *

Back layer phillips:
*Yes we also discussed this in ano thread - We have never seen a no file/no can key square SD - and SAAMS is a bit devoid of dates for the back SD - and we are all agreed on the 1992 date - So I am happy to update based on your dates *

1952 - 1968 square, file, no can-key
1968 -1980 square, no file, can-key
1980 - 1992 round, can key
1992 - present round no can keyDivot Repair tool - 1992- 04?
*Sure why not? I think I guessed the current end date in my table ! :o *Emblem Inlay on front scales - 80 Stainless Steel, before they were nickel/silver
Yep this is the date that is in the tableHi Huntsman.
I have a no file no can key square sd. It is on an elinox automobile. Similar to the middle one pictured here. http://www.sakhome.com/305357095
Maybe its an elinox quirk?
Pics, please! It's looking like the square/no file/no can key was an Elinox feature. 
-
Here are a couple knives which lead me to believe the wire scraper was no longer used in the early 70's. Still don't have an exact date but I want to say '72 or '73 Neither of these knives have the wire scraper
First 2 pics: an original Explorer - Aluminum tipped Tweezers, old Scissor Spring
Second 2 pics: Elinox Recruit (2.25 01 on box) with clip point small blade.




-
Awesome work HUNTSMAN, I personally have been using your various versions of this chart for quite some time. This is certainly an excellent update and shall remain one of my primary source for dating OS SAKs.
Again, Thank you for your dedication and hard work.
-
@lichan said:
I think this tool-evolution spreadsheet, the tang stamp detail picture, the knife model evolution pictures, etc. should have a sticky thread pointing to them to make it easier to identify and date unknown knives we come across. I've used them a couple of times in the last month and they are indispensable.
-
El Corckscrew, you are right, we discussed this Elinox Phillips screwdriver some months ago:
/topic/51152 -
-
/topic/75569
70s Victorinox for sale with no key can no file square rear driver.
-
Hey Guys
Never say never eh ???
Hot on the heels of ver viii (the so called last version) here is ver ix !!! :pok:Thanks so much for all your poz-woz feeback - And extra info - Much appreciated - And it's really good to know this sheet is useful and being used
But I am just the chronicler - And this really is your information and your knowledge! :tu:So based on some of the feedback above, the additional info from JB in the vintage SAK thread (which I think I missed first time around), and a little digging on sakhome - I made a couple more updates:
I have changed the dates of the backspring Phillips file/no file etc - and also put loosing the scraper on the SD a little laterSakhome is a great source of information - It's just a little hard to find/unravel sometimes.
Any comments/corrections gratefully received - I think maybe this spreadsheet will go on for ever !!
Finally I just gotta point you at a Swiss Army Dan youtube vid
- Where he finds the elusive square SD with no file and no can key - Unfortunately it sounds like he had to send it onto some other bloke ;)
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
:D

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
