Who owns a Buck 110?
-
@Nix said:
I'm a huge 110 fan. They aren't as popular today as they were when I was a young'n, but I still think the provide amazing value.The top two have stabilized wood scales, the bottom 110 has a "paperstone" handle. The paperstone version is much, much lighter, but lacks the 'heft' and handle-balance I love in the 110's.
Nice group of Bucks Nix. I always liked the looks of the paperstone version. I wish I would have picked one up when they were in production.

-
Posted these pics elsewhere, but I'll put 'em here again.
More often than not, I open my Buck 110's (110 with G10 scales and S30V blade pictured below) and 112's with one hand. While not specifically meant to be a OHO knife, I find it is pretty straightforward to do so.
I pinch the blade below the nail nick and then 'roll' the pinch down toward the handle. This rolling pinch lifts the blade up and out a bit. Still pinching the blade, I then use the middle and ring fingers to sweep the handle down and finish opening the knife. This is a controlled motion and doesn't require 'flicking' or 'popping' the handle down.

At the end of this opening technique, my hand ends up covering the blade a bit. But it's very easy to slip the blade forward and get the best grip for the task at hand. After a while the opening becomes fluid, smooth, and requires no thought.

Be careful when doing this that you don't let the knife slip forward and cut your hand! These Bucks are sharp and are real cutters!

-
Thanks, VICMAN.

Here's a follow-up shot of one of my favorite 110's:

Oak scales and 5160 blade steel. This is actually a numbered ("081") 110. First I'd ever seen.
The ricasso on the other side bears a "Custom" stamp, but no date markings.

I don't know anything more about it, really. Does get razor sharp, though!
-
Classic. My first knife as a kid. Still have it. Would love to carry it post 911.
-
Nice 110's VICMAN!
I think Buck is getting some great knife steel in these 110's with the Paul Bos heat-treated S30V. This alone has moved the 110 back into being a world-class knife.

I went out to the Buck factory in Idaho and toured the works.I ordered a custom 110 as soon as I got home from the visit!
Thank you Nix. I would love to see the custom shop.
I agree about the steel and the quality of the custom shop knives. -
Nice knives everyone.
I might have shown these before
but these are my two; both 74-80 date.
Both have slight variances notably tang stamp and nail nick. Also not as defined hollow grind especially on the right hand knife which I tried to photograph.



-
Beautiful photos from you all!!!
I've been wanting Buck 55 for ages, but can't find one locally, and eBay shipping is crazy expensive.
Simply gorgeous knife design. -
Can anyone post a pic with it's 110 next to a 91mm SAK for comparisson please?

EDIT:

Forgive me my lazyness.
Just checked ThePeacents recent posts and there are enough comparisson options there! :D -
Nice 110's VICMAN!
I think Buck is getting some great knife steel in these 110's with the Paul Bos heat-treated S30V. This alone has moved the 110 back into being a world-class knife.

And the custom shop does really fine work in my experience. I went out to the Buck factory in Idaho and toured the works. All the people who worked there were really nice and seemed to love their work. As part of the tour, I stopped at the Custom shop and met the knife-makers there. They were all guys with a lot (decades) of experience and were clearly passionate about the customs they made there.

I ordered a custom 110 as soon as I got home from the visit!
and guess who got that custom one?



not just S30V, but also G10 scales for us modern knife nuts


beautifully engraved brass :o

all in all a pretty bueast, but a user at heart

and more so, Nix added a custom leather sheath made by himself,
top notch stuff


I guess I'm becoming a convert now!
-

Nice 110's VICMAN!
I think Buck is getting some great knife steel in these 110's with the Paul Bos heat-treated S30V. This alone has moved the 110 back into being a world-class knife.

And the custom shop does really fine work in my experience. I went out to the Buck factory in Idaho and toured the works. All the people who worked there were really nice and seemed to love their work. As part of the tour, I stopped at the Custom shop and met the knife-makers there. They were all guys with a lot (decades) of experience and were clearly passionate about the customs they made there.

I ordered a custom 110 as soon as I got home from the visit!
and guess who got that custom one?



not just S30V, but also G10 scales for us modern knife nuts


beautifully engraved brass :o

all in all a pretty bueast, but a user at heart

and more so, Nix added a custom leather sheath made by himself,
top notch stuff


I guess I'm becoming a convert now!
Stunning knife!
Sent from my SM-G955U using Tapatalk
-
Seeing all those 110s really makes me want one again

But with stupid uk laws it would only be a display item
-

I ordered a custom 110 as soon as I got home from the visit!
and guess who got that custom one?

all in all a pretty bueast, but a user at heart

-
@sak60 said:
Nice knives everyone.
I might have shown these before
but these are my two; both 74-80 date.
Both have slight variances notably tang stamp and nail nick. Also not as defined hollow grind especially on the right hand knife which I tried to photograph.Those look fantastic! I like the lines of the older 110's. Shoulders seem a bit more squared up. Sweet grinds on the blades, too. It's interesting to see how the 110 changed over time.

-
Love the 110! I have one of the standard ones, as well as a 500, and a Case Hammerhead. All great blades

Nice trio of lockbacks Spartan!

Thanks buddy!

-
Nice knives everyone.
I might have shown these before
but these are my two; both 74-80 date.
Both have slight variances notably tang stamp and nail nick. Also not as defined hollow grind especially on the right hand knife which I tried to photograph.

Thanks Vicman

Nice knives everyone.
I might have shown these before
but these are my two; both 74-80 date.
Both have slight variances notably tang stamp and nail nick. Also not as defined hollow grind especially on the right hand knife which I tried to photograph.Those look fantastic! I like the lines of the older 110's. Shoulders seem a bit more squared up. Sweet grinds on the blades, too. It's interesting to see how the 110 changed over time.

Thanks Nix

-
- I own a few.*
/topic/63570
-
Welcome back toolguy, long no see

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login