Fire lighting kit
-
That was a cool article Spork
I am gonna have to try that one for myself :D -
Spork, you make some NICE stuff!!!
-
Man there is a lot of info on that woodsmonkey website Spork thanks for the link :salute: :tu:
I also found a review of the sharpmaker in there that would definately help ppl who were not sure if they wanted one or not
Seems like hawkchucker was wondering if he should get one or not :tu: well here's the link to that as well :D
I also like the birthday candle idea :ahhh man there is so much out there to learn about outdoor survival :ahhh
Glad there are ppl on here that know there stuff ;)
-
I got a question
being a newbie to firesteels how are the fancy flint fire strikers used pics would be useful but a good explanation would do me a world of good ::) :DThanks for any help

-
You hold the scraper more of less perpendicular to firesteel and scrape along it, really it's that simple. :)
-
Those fire kits looks sweet

I don't have a fire kit but more of a survival first aid kit/tin with me. I also polish the lid inside till it gets nice and shiny so it can b used as an emergency signal mirror.
-
@Poncho65 said:
I got a question
being a newbie to firesteels how are the fancy flint fire strikers used pics would be useful but a good explanation would do me a world of good ::) :DPeople confuse the two different methods because "Flint" is used to describe the natural mineral flint and the artificially made type. One common misconception is that you need to use a carbon steel scraper on a Ferro rod.
Traditional/Primitive Flint and Steel – requires a Flint Striker/Fire Steel/Strike-a-Light of sufficient carbon content and hardness.
A glancing blow with a piece of sharp-edged Flint or Chert scrapes tiny pieces of steel off the Striker that ignite in contact with air…it is the steel that burns. The yellow sparks produced are relatively low temperature and requires prepared tinder such as Charcloth or Tinder Fungus to catch it and create a coal or ember.
You do not get flame directly from this method; the primary tinder is inserted into a tinder bundle and blown into flame.
Firesteel, Ferrocerium, Artificial “Flint”, Cigarette Lighter "Flint", Auermetall, Mischmetal, Survival Match, Metal Match, etc. – is made from a combination of rare earth metals. The white-hot sparks produced can ignite tinder materials into flame directly. The material that ignites is what gets scraped off the rod.
There is no specially made striker needed, only a sharp-edged scraper. It can be carbon or stainless steel, the sharp edge of a rock or even broken glass.
There are plenty of videos on the net that show how to use both types.
-
Yesterday I opened up a sealed package of GI Trioxane that had been undisturbed in storage for years. Of the 30 bars, 13 of them had partially or completely decomposed into an unburnable powder.
Since they have not been mishandled, I assume it was due to poor packaging allowing air to get into the hermetically sealed foil envelopes.
I stopped carrying Trioxane as emergency fire starters years ago for this reason, when I found the bars I was keeping in my kit had turned to powder.
Hexi/Esbit does not suffer the same deterioration problem and is much more durable. I have some just as old or older than this Trioxane and it is fine…less toxic too.


-
All edited mate.
-
Thanks, you're my hero!
:D -
:think:How big or actually how small would a ferro rod firesteel have to be to fit into a corkscrew? If an 1/8 of an inch will work then they have them on this site
http://www.campingsurvival.com/flintbar18x2.html
Plus they seem to have a slew of other things as well :D
-
1/8" is too large...I have those rods from Campingsurvival.
You would need a rod not much greater in diameter than a cigarette lighter flint...too small and fragile to be really useful in my opinion.
-
@SporK said:
1/8" is too large...I have those rods from Campingsurvival.You would need a rod not much greater in diameter than a cigarette lighter flint...too small and fragile to be really useful in my opinion.
Thanks Spork I knew you would chime in and answer that one
I thought it looked to big but the way corkscrwe twist around I thought it might have been an optical illusion :D -
The only rods I've ever found that would fit the corkscrew were pried from the bottom of GI style plastic matchsafes...and not all of the ones you find may fit. I have two slightly different sizes and I couldn't tell you which matchsafe I got it from...could be from the GI issue, Coghlan's Orange model or an Asian knockoff.
The one on the Vnox is too large and only goes in partially.

-
Since they might break to easily I guess this is one of those ideas that look better on paper :D
and thanks for the pics

-
I think the only practical way to use a piece of Ferro that small would be to carry in in a Metal file equipped SAK and scrape the rod on the end like a match or a Cigarette lighter flint.
-
I assembled a small Fatwood match kit in a matchsafe. The section of straw is from one used for Boba drinks...it is the largest diameter straw I've found. The inside diameter is larger than a LMF Army firesteel.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



