Something to help you date your Vic SAKs based on tool evolution
-
@Frater_Martin said:
El Corkscrew, thanks a lot! That's I need!
But! It has an awl without bevel on the tip, is not it? According to my observations, this type of awl was produced in 1983-1985. It is strange - in 1973 it must have bevelled awl, I suppose. Am I wrong?This awl probably just doesn't have the bevel ground on very well. In those days a lot of that would still have been done by hand, so variations like that are common. You really need to be able to see if the awl tapers or not - the 83-88 type awls will taper to about 50% of their thickness at the point. The older bevel awls have very little taper - maybe 80% of their thickness at the tip.
-
@El Corkscrew said:
Here are a couple knives which lead me to believe the wire scraper was no longer used in the early 70's. Still don't have an exact date but I want to say '72 or '73 Neither of these knives have the wire scraper
The scraper was dropped around 72 like you say. It was first dropped for a temp period in c. 1969, then brought back, then dropped again for good before 1974.
Thanks JB!!! Great info!
That explains a Spartan with bail and no scraper I recently got.

-
@Frater_Martin said:
Hi, guys. I have one more question. Everywhere we can see, that logo shield on the top scale changed fron nickel-silver to stainless steel in 1980. But can we be sure, pretty sure in this date? I have a 74mm knife with one leaf type spring on the scissors and the shield made of stainless steel. On the Internet I have seen several knifes with SS shield but with tools from 1970s. I know official position of Victorinox in their documents, but I see the reality.
So the question is: is it possible, that this change happend before 1980? Maybe 1980 - is the year of changing on 91mm knifes, but for small size knifes it happend earlier... I do not know.Very likely. Most people think that various "tool evolution dates" apply uniformly across all product lines, but there is a ton of evidence that they do not. Best example I can think of is the sewing eye in the awl was introduced c 1986 on the 91mm line, but 84mm knives continued to use the eye-less version seemingly into the early 1990s. 84mm knives went to the thin 2.0mm tang almost 10 years before it was changed on the 91mm knives. Stuff like that.
-
@El Corkscrew said:
I know jazzbass has commented about the common years the Tang stamp was blank. I believe it was 73,75 and 77.Correct. There are blank stamp versions of the older 2.7mm Victoria blades and the later 2.4mm Officier Suisse blades. The pen blade style can sometimes be a guide to which main blade type you have: spear-point pen = 2.4mm main; clip point pen can be 2.4 or 2.7, but is usually the 2.7mm main blade.
-
@Frater_Martin said:
Minichamp, I have almost same classification of the reamers.
But I distinguish two types of pre-1983 reamer, but could not yet the time border between them.
Last two photos show both sides of transitional reamer of 1986.And I have the question: on the Internet the majority of sources claim that sewing eye on the awl was implemented in 1985, but some - that in 1986. There is the true?
I don't know. To the best of my understanding, the main source for 1985 being the year when the sewing eye was introduced is Victorinox. They list this in 1985 along with the introduction of the 90 degrees stop on the cap lifter, the introduction of the chisel, and the new shape for the backside small screwdriver. Since I have several 91mm SAKs with the 90 degrees stop and no sewing eye, I do believe that the sewing eye was added a bit later than the 90 degrees stop, but I'm not really sure what this implies. It can imply that the 90 degrees stop was actually introduced in 1984, or that the sewing eye was only introduced 1986, or...
My personal tendency is to "adopt" the transition years that Victorinox lists except for the cases where I am aware of strong evidence that they are wrong. This is the reason why I listed 1985 as the relevant year. JAZZBASS is undoubtedly a much bigger expert than me and it seems like he thinks that the right year is 1986. He is probably right.
-
@MiniChamp said:
My personal tendency is to "adopt" the transition years that Victorinox lists except for the cases where I am aware of strong evidence that they are wrong. This is the reason why I listed 1985 as the relevant year. JAZZBASS is undoubtedly a much bigger expert than me and it seems like he thinks that the right year is 1986. He is probably right.This is my tendency as well, but there are many cases (as folks on this thread are discovering) where even "official" dates are wrong. There is another aspect to this that I've written about before, and that is that people need to think about how Victorinox is a knife manufacturer and what that means. Big plant, lots of parts in different areas, and new items introduced as the engineers feel they are ready (i.e. there are no "model years"). And, because MOST of the stuff they change is evolutionary and not revolutionary, it is very common to see things phased in over a period of time or see weird mixes of different features over a multi-year time frame for things that were supposed to be introduced "at the same time".
For example, 1991 is often listed as the year when the grooved corkscrew disappears, the multipurpose hook appears, and the key ring attachment moves to the backspring of the openers. However, its pretty common to see knives from the 1990-1992 era with mixtures of old and new for these features. Victorinox isn't like a car manufacturer that shuts down all summer for retooling and comes back online in September making a new model year of changes. They would introduce the changes as available and roll them out. So it's 1992 and someone finds a box of old grooved corkscrews in the warehouse, you don't toss them because they don't fit or you changed back in 91, you dump them in the parts bin and use them up.
This is the main reason that almost every date you see me post will have a "c" (for circa) in front of it. Approximately. So if I see a knife has a sewing eye awl and a tang stamp with a small "v", I'll say c 1986. In reality that knife could have been made in 1985 with the earliest sewing eye awls to come out, or in 1987 when someone was using up old stock blades with the old stamp.
-
That awl makes sense

-
My personal tendency is to "adopt" the transition years that Victorinox lists except for the cases where I am aware of strong evidence that they are wrong. This is the reason why I listed 1985 as the relevant year. JAZZBASS is undoubtedly a much bigger expert than me and it seems like he thinks that the right year is 1986. He is probably right.
This is my tendency as well, but there are many cases (as folks on this thread are discovering) where even "official" dates are wrong. There is another aspect to this that I've written about before, and that is that people need to think about how Victorinox is a knife manufacturer and what that means. Big plant, lots of parts in different areas, and new items introduced as the engineers feel they are ready (i.e. there are no "model years"). And, because MOST of the stuff they change is evolutionary and not revolutionary, it is very common to see things phased in over a period of time or see weird mixes of different features over a multi-year time frame for things that were supposed to be introduced "at the same time".
For example, 1991 is often listed as the year when the grooved corkscrew disappears, the multipurpose hook appears, and the key ring attachment moves to the backspring of the openers. However, its pretty common to see knives from the 1990-1992 era with mixtures of old and new for these features. Victorinox isn't like a car manufacturer that shuts down all summer for retooling and comes back online in September making a new model year of changes. They would introduce the changes as available and roll them out. So it's 1992 and someone finds a box of old grooved corkscrews in the warehouse, you don't toss them because they don't fit or you changed back in 91, you dump them in the parts bin and use them up.
This is the main reason that almost every date you see me post will have a "c" (for circa) in front of it. Approximately. So if I see a knife has a sewing eye awl and a tang stamp with a small "v", I'll say c 1986. In reality that knife could have been made in 1985 with the earliest sewing eye awls to come out, or in 1987 when someone was using up old stock blades with the old stamp.
You are certainly right. I think that what you describe is probably why changes that involve multiple parts are likely to have sharper timing than those involving individual parts. When they changed the thickness of the main blade shank from 2.7mm to 2.4mm, for example, this also involved changing the spring and the corresponding backside tool (corkscrew or Phillips SD), so I expect such a change to have a relatively sharp timing and I believe that this was indeed the case.
While it's probably not practical (and not even very meaningful) to date a SAK with an error margin of less than a year or two, I am under the impression that the main purpose of this thread is to help create a table in which every tool change is assigned to a specific year. As you unraveled here and elsewhere, not every change that was made really lends itself to such a simplistic description. Still, it seems that most changes can be at least approximately described in this way for the practical purpose of dating SAKs with reasonable accuracy. The practical question then becomes: Which specific year is the best one to assign to a given change?
As I tried to make clear, the years that I proposed for various changes earlier in this thread are basically just estimates. I think that it would be a good thing if people possessing the knowledge to do so will either confirm or suggest improvements to such estimates. This can help the table to converge to something that will be as accurate as possible.
-
For my interests... Threads like this are exactly why I joined this forum.

-
this thread and information in it is awesome! :o
Incredible work guys!
-
@Pablo O'Brien said:
Information overload. :ahhh

Absolutely Pabs
Great to see all this amazing information and discussion folks. Thanks so much FM, MC and JB

Guys - This is beyond Platinum level of expertise/knowledge :o
Give me a while to process it -
I think a couple of principles (that are already listed in the sheet) will stand:- The table is mainly for 91mm
- Dates are always estimates !!
To those I might add - That I will concentrate on visible/external changes - Eg: Some of the spring changes are very subtle!!
Having said that I will get it as accurate as possible - and also try to get as much into the chart as I can
So, surprise, surprise - We will have a version X !! ......And probably beyond !
Frater M - Is the info in the posts above what you were referring to when you said in the previous page.... "May I make some changes?" ?
.. As I *always *rely on you guys to provide the info !
... Or did you mean you want to change the sheet directly ?
PM me if we need to discuss this please. -
@Huntsman said:
Give me a while to process it -
I think a couple of principles (that are already listed in the sheet) will stand:- The table is mainly for 91mm
- Dates are always estimates !!
To those I might add - That I will concentrate on visible/external changes - Eg: Some of the spring changes are very subtle!!
Of course, I understand that some historical changes are tooo subtle to be included into the table. I have put that information, just to allow this be here, on MTO. Because I would not want to create new separate thread for any new detail or change I have found in Victorinox.
And look. In the table there is a date of pin-hole appearing on the scales. In Victorinox the history of the hole appearing on the regular scales was a bit tricky and messy. Later I will tell you about the dates because the evidence base is too huge and is not complete yet.
@Huntsman said:
Frater M - Is the info in the posts above what you were referring to when you said in the previous page.... "May I make some changes?" ?
.. As I *always *rely on you guys to provide the info !
... Or did you mean you want to change the sheet directly ?I had mentioned "I have something to add, may I [add]?", so I do not pretend to change your table. And I added it later. Sorry for this misunderstanding.
-
Posted in wrong thread.
Original thread linked me here -
Hi everyone,
Im a new memeber but frequently read the discissions.
Anyways I just came accross a “Modeler” ? It is definitely a modeler but the metal saw/file has a wood saw cut??? Has anyone ever seen this? It seems like a metal saw was accidently machined with woodsaw teeth but still has the file. I cant find anything about this but it is cool!

-
The info in this thread is fantastic!
I just spent two hours dating my five 91mm SAKs. :ahhh
-
That’s great - Thanks

We have some very knowledgeable SAK aficionados here.

-
Looking for some help and possibly might have some info to complement what's already in this thread.
I have a SAK (fisherman tooling, fish descaler with magnetic tip, backspring philips with file) which according to what I've read places it between 1957 and 1961 but there is something that doesn't add up looking at the tables.
It has no exposed rivets which makes it >1957, it has the simple reamer which makes it <1961. I know these dates are not precise.
What doesn't add up is the can opener doesn't have a PAT stamp which would make it >1971 but I know this knife was never repaired or had any parts replaced apart from the tweezers. Any thoughts? -
There's been a suggestion that we bump old threads - So I thought I'd bump this one
It's pretty interesting to see the progression from the first version to the latest one (see the first post)
Also reminds me - I really should make a new version as there are some updates not in the sheet yet - eg from the end of this thread
And this thread is one of the many fabulous resources in this stickie which hopefully everyone knows about
/topic/75774
-
A new version of the chart? Yes, please!
-
@Huntsman said:
There's been a suggestion that we bump old threads - So I thought I'd bump this oneIt's pretty interesting to see the progression from the first version to the latest one (see the first post)
Also reminds me - I really should make a new version as there are some updates not in the sheet yet - eg from the end of this thread
And this thread is one of the many fabulous resources in this stickie which hopefully everyone knows about
/topic/75774
Great choice for a bump, a very interesting read. To bad Frater Martin and JB don't seem to be active anymore, they were an amazing source of SAK knowledge!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login