Spirit 30 day Challenge with a few Early- early Birds
-
Yeah I'm good thanks, things just seem to be coming from all angles at the moment. I switched back to carry a Surge to do the things I needed do so failed the challenge at the end. I'll be sitting out the PX challenge as well as I don't have time at the mo
-
Day 28
Horrible pic with bad light and through a aloksak but did some work on my car breaks today.. No more wobbly brakes and a new contact for the engine heater

[It's not failure if you learn something from it]
-
Starting Jan 10th, this will be day 28 of 30.

-
Day 28
Opened up a here's couple of casings on verious equipment today but no chace for photos so here's a quick one.![20180206_205608[9368].jpg](/assets/uploads/_imported_attachments/migrated/356579_20180206_205608%5B9368%5D.jpg)
-
Day 27:

Been a long long long day
-
Nice round of pics yesterday guys

-
Day 29 making dinner and whole family is sick except for me [emoji53]

[It's not failure if you learn something from it]
-
Day 28

-
Day 29
Infra red burner change out today.![20180207_084635[9382].jpg](/assets/uploads/_imported_attachments/migrated/356832_20180207_084635%5B9382%5D.jpg)
-
You guys almost have this 8)

-
Almost there !

-
Last day today.. Feels like it is going to fast.. Picture comes later and some sort of thoughts on this [emoji5]
[It's not failure if you learn something from it]
-
Day 29. My next MT toy is trying to photobomb. :)

-
Ok it's time for my thoughts. Ouch! That makes my head hurt, but I'll do it any way. Let's see where do I start? By now every one should know my EDC of choice for 20 years has been the Spirit's Big Brother, the SwissTool X. So that is what I judge all others by. The Spirit is DEFINATELY familiar, all outside locking tools with individual back springs so no clumping. You only get the tool you open, LOVE that! The pliars are a good cross between needle nose and blunt nose, the cutters work great, and the Chisel is AWLSOME. The sharpend corner and actual cable stripper make it far better than the Swisstool chisel. The thickening of the bottle opener for use as a crate opener/ prybar is a good way of reducing size and weight vs the Swisstool, but I prefer the Swisstool oversized flat blade/ prybar tool seperate from the regular Victorinox bottle opener. I deal with a lot of oversized flat blade screws. The Spirit file although a narrower profile dose seem to be more agressive and I like that. Now to the faults if one can call them that. The Spirit just dosen't have the HEFT of the Swisstool. I know that is exactly why most prefer it and I did enjoy how it just dissapears on the belt and can easily fit in a pocket.
I on the other hand find that extra bulk of the Swisstool reasuring when I am pushing an impliment hard (useng a hammer to drive the chisel, using the Swisstool as a hammer, tapping the philips into a screw head full of baked in gunk or realy prying hard with the pry-bar etc...) I also missed the square, straight edge and rulers on my Swisstool. The biggest disapointment of all THE SCISSORS. They are fine for cutting string, paracord, short little cuts that don't need to be precise. I actualy found for me that the 58mm classic scissors perform better in a wider range of applications. The modded scissors I started the challenge with did seem to perform a little better for me than the unaltered ones on the XBS I finished with. Although I have used the butter blade on a Spirit before, neither of the ones I used here had the partial SE blade, the first one was modded and had the SE removed but was still prety much a sheeps foot shape. The XBS has a Spearpoint with a very slight curve to it. I love that blade, it's slightly different from the standard Vic spearpoint due to the curve and it just feels better balanced (for lack of a better way to put it) when in use. Finaly and it could be just my imagination but the BO XBS although just as polished as the standard Spirit just seemed to be better to grip than the standard version. Saying that seems a little odd to me because I have heard so many complain about them being hard to grip. I have never had a problem with the grip on any of my Swisstools including the Spirit. Now I'm going to take something to counter the pain caused by all this thinking and look forward to seeing some one else's thoughts.
Anyone up to the task.

-
Good to read your thoughts on the Spirit Douglas.

Well done everyone for sticking at it for the month too.

-
@hiraethus said:
Good to read your thoughts on the Spirit Douglas.
+1

-
Great thought on the Spirit, Doug

-
Day 30 and some thoughts

The spirit x is a fantastic multitool with just the right amount of tools for my EDC purpose, I was longing for one quite some time before I bought one and soon realized that I don't know how to carry it.. Which ment that I didn't, this challenge was the perfect reason to force my self to do it and I finally found a nice way to carry it. Same carrier only that I moved it to about 1 clock

The only downside is why they have that scissors that they do? I don't like it but that is probably the only negative I have to say and after this challenge I absolutely love having the spirit on my belt!
Starting tomorrow I will start carrying my expedition (now with plus scales) and se if I miss the spirit, some tools are the same and are my favorite and most used

Thanks everyone for a fun and interesting challenge with a lot of fantastic pics!
[It's not failure if you learn something from it]
-
Day 29. Nice thoughts


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
