Plier play - how much is normal?
-
I've just found out that my occasionally used 2017 Surge developed some play in the pliers.
It's at a useable level still but shouldn't become more. Or the wire cutters would bite into each other
My OG Supertool and PST for comparison has not.
What is your experience with that if I may ask?
-
My ST300 (which has the same plier head) has a little play but nothing that would affect use

-
My Rebar had too much play and I fixed by peening the pivot. There is a new better way to tighten the pivot though see here /post/1606839
-
-
@SteveC said:
My Rebar had too much play and I fixed by peening the pivot. There is a new better way to tighten the pivot though see here /post/1606839Thanks Steve, I've tried the new way Sam discovered, but the pivot is not moving.
I've peened some scissors successfully before, but I'm not sure I'd try it on the Surge pliers

-
How much play is normal? I would think any sort of play is not normal.. :) I do have some that there's a bit of side to side play, if it still can serves what I need it to do. I wouldnt do anything with it. My regular wave does that. But it still cuts stranded wires like a boss.
-
NO PLAY is right answer. If there is just a little play then wire cutter won't work properly and plier head play will be bigger and bigger
-
Thanks Sam and Vjeko,
Yeah... I'll see. I might sent it in for warrantee.
Would you remove the file/saw before sending ?

-
I would remove the file and or saw before sending. They might send you new ones.
-
So my 1.5 month old Rebar developed some play as well, and it causes the wire cutters to bite into each other


I'm not sure what's happening. I'm very cautious to use tools only as and for what they are intended to. No abuse.
The old models I have are fine.
Hope this goes all well.
Thanks again for your replies guys

-
Hey Matt,
Seems like sending it in would be best. I have two surges(2016 & 2017) and an ST300, as well as many other newer "better" LMs. None of them came with or have developed play in the pliers. In fact, my first Surge came a bit too tight in the pivot and is still a bit tight after many months of use.
Good luck with it, Matt! Hopefully LM will get it sent back in good time.
The only two "bought new" LMs I own that have notable play are the Sidekick and Wingman. But, they have anvil cutters, so that is fine.
-
@gerleatherberman said:
Hey Matt,
Seems like sending it in would be best. I have two surges(2016 & 2017) and an ST300, as well as many other newer "better" LMs. None of them came with or have developed play in the pliers. In fact, my first Surge came a bit too tight in the pivot and is still a bit tight after many months of use.
Good luck with it, Matt! Hopefully LM will get it sent back in good time.
The only two "bought new" LMs I own that have notable play are the Sidekick and Wingman. But, they have anvil cutters, so that is fine.
Thanks gerleatherberman for sharing your experience with your Surge and ST300.
I was just losing confidence in LM a bit but that gives me hope the replacements will be fine.
-
If you are sending them in then I hope they fix them up for you and there is no hassle involved

-
@MTMatt said:
Hey Matt,
Seems like sending it in would be best. I have two surges(2016 & 2017) and an ST300, as well as many other newer "better" LMs. None of them came with or have developed play in the pliers. In fact, my first Surge came a bit too tight in the pivot and is still a bit tight after many months of use.
Good luck with it, Matt! Hopefully LM will get it sent back in good time.
The only two "bought new" LMs I own that have notable play are the Sidekick and Wingman. But, they have anvil cutters, so that is fine.
Thanks gerleatherberman for sharing your experience with your Surge and ST300.
I was just losing confidence in LM a bit but that gives me hope the replacements will be fine.
You're welcome! It is a good thing that everyone that is unhappy with their LM send them in. Maybe LM will tighten up their QC if they keep getting defective tools back. :)
-
Thank you guys, I'll report back when I've got any news

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login