spartan lite upgrade.
-
As promised in another post. I decided to show my spartan lite upgrade.
I've read far too many of the modder posts and decided it was my turn. Personally I find the spartan lite almost perfect. In really want a climber lite and I will make one some day but for now...
. In one of the old posts I found a few people complaining that the lite is poor on the Sak. And I agree. It seems weak. But I figured it couldn't be hard to upgrade. So I went and ordered a 3mm 18000 mcd (Mili candle) led. Then carefully disassembled the spartan and took apart the lite portion.
I was pretty simple and the results are great. I didnt take modding pics. But I have posted the comparison pics. The difference between stock led and upgrade is substantial.
I suggest if you are into modding. This was a good upgrade. I actually acts as a small flashlight now. Not crazy, but good enough.
-
Sorry. Had to resize the pics.



-
Wow, that is great! Now the light is usable! I never cared for the stock one. How much did the light upgrade cost?
-
does it use the same battery?
-
It uses the same battery.
I already had the pin stock so i dont know that cost, and i had replacement scales.If i recall is was $.10 canadian for 10 led. 1cent per led, free shipping.
-
Fantastic! I had an old and very weak Spartan Lite which I sold - something I immediately regretted. My only "Lite" is the one on my Mountaineer Lite - it's not bad, now that it has fresh batteries. Better than no torch at all!
But this upgrade is great. -
Only downside is that the battery will not last nearly as long.

Nice mod!

-
Nice mod... Any problems with heat from long period use?
Sent from my iPhone using Tapatalk
-
None whatsoever...

-
No heat issues.
It will use the batter faster, but I never found it useful before because the lite was so weak.I expect it will get used much more like this.
-
Love the Spartan Lite! As you can probably tell, the Spartan is one of my favorite patterns! :D

-
I am a fan of the spartan. But i find that typicaly my edc is either a climber, explorer, or pioneer x. However depending on what im doing that day sometimes i need a flashlight so the spartan lite fills a needed gap.
-
Sorry to drag up an old thread but do you know the model of led you used please? The leds I've found for doing this run at about 3.6v but the spartan lite uses 2x 3v batteries = 6v.
Or is there something I'm missing? ???Thanks
-
Gotta find a beater "lite" model (preferably a Huntsman Lite) and try this. I have a Master Gardener, which being an older model has the old dim LED. Even dimmer than my ca. 2012 Wenger Microlight Esquire. But it's too uncommon to mess with.
-
The leds have a voltage bias typicaly between 2.9-3.6v. The will still work fine with a 3v battery. The batteries are in parallel not in series like most flashlights. Eg. Two batteries will still provide only 3v.
-
@armi101 said:
The leds have a voltage bias typicaly between 2.9-3.6v. The will still work fine with a 3v battery. The batteries are in parallel not in series like most flashlights. Eg. Two batteries will still provide only 3v.Ahh I see

Just waiting for my spartan lite to arrive then I can begin tinkering >:D
Is the original led round topped or flat top?
I've managed to find and 18000mcd cool white leds so thinking I might try one of them. -
@armi101 said:
The leds have a voltage bias typicaly between 2.9-3.6v. The will still work fine with a 3v battery. The batteries are in parallel not in series like most flashlights. Eg. Two batteries will still provide only 3v.That doesn't sound right...pretty sure they are in series.
I'll have to try the mod regardless. It seems like there are different levels of brightness even with the original Lites. I think they're generally much brighter starting in '12 when the housing was changed. The newest clear ones are all brighter. I've noticed the same in the 58mm scale lights.
@craggus2000 said:
Ahh I see
Just waiting for my spartan lite to arrive then I can begin tinkering >:D
Is the original led round topped or flat top?
I've managed to find and 18000mcd cool white leds so thinking I might try one of them.They all look round to me. In both the 91mm and 58mm knives.
-
Opened the battery door. They are in series. My mistake.
-
Are there any other components in there, eg resistors? Or is it just 2 batteries, a switch and an led?
-
@craggus2000 said:
Are there any other components in there, eg resistors? Or is it just 2 batteries, a switch and an led?Just the batteries/switch/led and simple conductors.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login