The SAK Whittling Club
-
@Thisjk38 said:
Here my addition to this club, not quite done yet. Need to work on the ball some more and sand it, but fun project so far. Even though it cost me
5 stitches, had the small ballads close on me....I modified my hiker’s cap lifter into a gouge which worked extremely well. I used the hiker for about 80% of the job. Had to use a longer gouge for when I got pretty deep with the SAK. Also tried out he buck canoe for a while, it did really well.

Sent from my iPhone using Tapatalk
I want to make one!
I've got a Camper on which way I sharpened the caplifter... Maybe I'll make the other changes suggested.... I need to buy some wood! -
@El Corkscrew said:
Here my addition to this club, not quite done yet. Need to work on the ball some more and sand it, but fun project so far. Even though it cost me
5 stitches, had the small ballads close on me....I modified my hiker’s cap lifter into a gouge which worked extremely well. I used the hiker for about 80% of the job. Had to use a longer gouge for when I got pretty deep with the SAK. Also tried out he buck canoe for a while, it did really well.

Sent from my iPhone using Tapatalk
I want to make one!
I've got a Camper on which way I sharpened the caplifter... Maybe I'll make the other changes suggested.... I need to buy some wood!Yeah man go for it. I had a lot of fun doing it. Not too hard either. Use a soft wood though. I had to quit through my first attempt because I was using a wood that was much too hard.
As for the cap lifter, I grounded the side that has the slant to it, and then curved the back side of it to for the gouge. About 20 mins with my bootleg Dremel, and periodic dipping in water. Sharpens up really nice too, hair shaving sharp.
Sent from my iPhone using Tapatalk
-
Great timing for this topic to show up, just read all the way through it, I've been wanting to do a simple walking stick and after posting in the111mm challenge I saw this.
Here's the pic again.PS. Some nice work here everyone

-
Who was the vandal did that? :ahhh
-
Kilroy most likely :D He was there.
-
Oddly I was thinking earlier today of my school days and carrying a pocket knife, those poor desks

-
I should do this. We live in a redwood forest. Unlimited material to practice on every time the wind blows.
Sent from my SM-P900 using Tapatalk
-
Decided to do a man craft yesterday, and did some whittling with the Hunter XT and the Ranger

-
nice work
-
@Spartan19 said:
Decided to do a man craft yesterday, and did some whittling with the Hunter XT and the Ranger

-
Some random pics, all done with my Whittling Cadet which needs a polishing up soon [emoji2][emoji2][emoji2]









Sent from my SM-G935F using Tapatalk
-
@stoneshank said:
Some random pics, all done with my Whittling Cadet which needs a polishing up soonNice pics stoneshank!

That is a lot of whittling time! -
Some random pics, all done with my Whittling Cadet which needs a polishing up soon
Nice pics stoneshank!

That is a lot of whittling time!Yeah, you can appreciate the time spent I see ![emoji2] [emoji2]
I used to work as a relearning slow learning furniture carpenter [emoji222][emoji222] and we were blessed with one boss that knew all about antique restoration (beside the point).
She used to get all riled up when we started sanding something, out of habit. Trying to make us understand that if the material was properly planed then the surface was already smooth as the fibers were cut and when we started sanding we only made it worse by rubbing the fiber ends up.
Moral of the story, I guess, is that I -try- to cut like that now.
It's it good enough? Not perhaps, but it doesn't need to. I'm just trying to learn how to really understand how the wood grain "moves" so I always cut them instead of breaking off pieces, no matter how small.
I don't mean to sound to pompous as I might seem btw.
It just made me happy to see someone else appreciate how much time it really takes. I'm usually listening to podcasts meanwhile and all of a sudden four, five, six hours has passed when I'm done.
Usually the end result looks like an infant's drawing but that is fine. I still feel relaxed and feel how I've heard people who meditate say they feel. If I end up with something worth giving away in the ends, then it's a bonus!
Sent from my SM-G935F using Tapatalk
-
Wow! A lot of work! Really like what have you done! I can't do anything, only a time a tried to whittling something, and the result was similar to a primitive vodoo doll :ahhh :D
-
She used to get all riled up when we started sanding something, out of habit. Trying to make us understand that if the material was properly planed then the surface was already smooth as the fibers were cut and when we started sanding we only made it worse by rubbing the fiber ends up.
Moral of the story, I guess, is that I -try- to cut like that now.
[...]
I've always (since I was a kid) preferred the surface finish of properly cut wood over sanded wood, so reading this actually made me happy. “I'm not alone!”

-
@stoneshank said:
I still feel relaxed and feel how I've heard people who meditate say they feel. If I end up with something worth giving away in the ends, then it's a bonus!I definitely can appreciate the patience it takes, and the extra benefit is that is is very therapeutic and gets your mind off of everything else so that you can relax. And it is therapeutic for others that can appreciate what you do.
I have played music professionally for over 40 years and playing music does for me what whittling does for you.
It is great to be doing something you really love to do. It helps keep you healthy.
-
Awesome whittlin' Stoneshank!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


