Customizing Gerber mp600?
-
I fit a saw from SOG in my MP600 with some very minor modification. I think you could do the same with a SOG knife blade. SOG sells individual parts for their tools on their website.
/post/1313907
-
first of, welcome and congrats on your MP600, they are beasts.

secondly, I think you're the only one who prefers Gerber's carbide cutters to a normal cutter.


Leatherman's replaceable cutters are praised and truly good, but Gerber's leave a lot to be desired and in most people's minds and experiences they're garbage, shattering at the slightest effort, unable to cut precisely and unusable for hard stuff, the kind of things you'd want a replaceable and/or hard cutter to cut

they just don't work well :P you can do your research on that

OTOH, if you want those 3 things in your tool and keep with Gerber, I'd pick an MP800 Legend, the blade is even openable with one hand and darn good in my experience, very sharp and easy to touch up

what I hated about the MP800 were the replaceable cutters :-\

hope that helps

-
I second the comments on the carbide cutter. They are garbage and expensive to replace. Stay away from them.
-
Hey thanks for the input guys.
I'm a complete noob when it comes to gerber anything so thanks for the info on the carbide bits.
I mainly wanted the carbide bits cause I am afraid of getting the standard cutters dull and thought it would be cool to be able to replace them if they got dull. Are the carbide bits weaker than the standard cutters? I would mainly be using them to cut copper wire maybe at the most/in rare cases to cut something like a metal coat hangar. If they're total crap though then maybe I should go with the mp600 pro scout. -
@HandyGlock17 said:
Hey thanks for the input guys.
I'm a complete noob when it comes to gerber anything so thanks for the info on the carbide bits.
I mainly wanted the carbide bits cause I am afraid of getting the standard cutters dull and thought it would be cool to be able to replace them if they got dull. Are the carbide bits weaker than the standard cutters? I would mainly be using them to cut copper wire maybe at the most/in rare cases to cut something like a metal coat hangar. If they're total crap though then maybe I should go with the mp600 pro scout.The problem with the MP600 carbide cutters is that they are very hard = very brittle. This means they are excellent for cutting softer wire such as copper as they don't wear so fast, but they can shatter when tried on harder wire (eg coat hangers). Armed with that knowledge you can make an informed choice.
-
Lots of peeps have broken the cutters. I haven't though. Pics etc in this thread.
-
@HandyGlock17 said:
Hey thanks for the input guys.
I'm a complete noob when it comes to gerber anything so thanks for the info on the carbide bits.
I mainly wanted the carbide bits cause I am afraid of getting the standard cutters dull and thought it would be cool to be able to replace them if they got dull. Are the carbide bits weaker than the standard cutters? I would mainly be using them to cut copper wire maybe at the most/in rare cases to cut something like a metal coat hangar. If they're total crap though then maybe I should go with the mp600 pro scout.You can easily sharpen normal cutters on pliers. The first new MP600 I got with the carbide cutter, I tried to cut cloth hanger. It shattered immediately.
-
Another voice against the carbide cutters. I love my MP600 but the cutters put me off using it - They shattered straight away when I used them and I wrote to the UK agent for Gerber who begrudgingly sent me replacements. Haven't tried using them since. The MP400 gets much more use.
-
Ok, well I canceled my order for the bladeless mp600 cause of the carbide cutters.
I was looking at the mp600 pro scout and noticed that some pictures of it show the knife with an awesome curve like the one on the mp600 frontsight.
Then other pics show it with a wierd straight/serrated knife that looks like the one on the suspension (which in my opinion looks like crap).Is there a certain model of the scout that has the awesome knife the frontsight has??? ???
-
The wharncliffe style blade is the only one in production on most tools, currently. I believe that Snap-On branded MP600 is the only one without it anymore.
Someone more knowledgeable will likely be along to give a more certain answer.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login