Leatherman Wave + and new Nylon sheath (pic heavy !!)
-
One question, are the OHO holes on the two blades as sharp as I've seen reported elsewhere?
Otherwise I do like the sheath

-
And the Wave + itself, well ... ::)
I must say that his one looks like a Leatherman from 15 years ago. Not one thing wrong with it (okay, there was one thing, one of the screws from the replaceable wire cutters wasn't screwed in deep enough, and it touched the handles when closing the tool, but this was fixed in two seconds and with two twists of the wrist ;)).
But the rest of the tool feels just perfect, nothing rubbing, nothing too loose or too tight, handles perfectly aligned (the tool lies perfectly flat on the table, not like most Spirits
). And every part of the tool, inside and outside feels just perfect. This Wave + is possibly the Leatherman with the best fit and finish since, dare I say ... My original Supertool :D.Okay, my Charges (date codes 0808), my previous Wave (date code 0111) and the two 25th Anniversary Waves (date codes 0408) I recently bought also had great fit and finish, maybe the Wave/Charge platform is just Leatherman's A-game. I must say, all of my previous Wave/Charge tools had the pliers rubbing against the handles while closing the tool, scratching up the plier head along the way, the new Wave + (at least the one I own :P) does not seem to have this "problem". This is not a big thing, since it's a tool and pliers are bound to get scratched up during use, but still, I hope this means that Leatherman have stepped up their game, and that their QC issues have been dealt with ... If not, I guess I should just be happy that I was one of the lucky ones this time ... ;)
P.S.: I also bought it because this one doens't have the "+" on the handles (yet ?). If the next batch comes out and those have Wave + on the handles, I will be very happy that I got one of the first batch (collectors ... ::)).
-
@Smashie said:
One question, are the OHO holes on the two blades as sharp as I've seen reported elsewhere?Otherwise I do like the sheath

Just checked the OHO holes on my 0111 Wave and on one of my 0808 Charge AL's and compaired them with the Wave +, and the OHO on the PE blade feels exactly the same as on the old ones, the OHO hole on the serrated blade is sharper than on the old ones, but not nearly sharp enough to cut yourself with it (like one of the youtube reviewers I saw claimed), and it offers quite a good bite to open the serrated blade, while the less sharp OHO on my 0808 Charge sometimes let my finger slip out of the hole while deploying the knife.
So maybe they're a bit sharper, but not so sharp that it becomes a problem (not on my Wave + anyway ;)).
-
One question, are the OHO holes on the two blades as sharp as I've seen reported elsewhere?
Otherwise I do like the sheath

Just checked the OHO holes on my 0111 Wave and on one of my 0808 Charge AL's and compaired them with the Wave +, and the OHO on the PE blade feels exactly the same as on the old ones, the OHO hole on the serrated blade is sharper than on the old ones, but not nearly sharp enough to cut yourself with it (like one of the youtube reviewers I saw claimed), and it offers quite a good bite to open the serrated blade, while the less sharp OHO on my 0808 Charge sometimes let my finger slip out of the hole while deploying the knife.
So maybe they're a bit sharper, but not so sharp that it becomes a problem (not on my Wave + anyway ;)).
OK good to know

-
One more thing, the new sheath has no internal pocket to store the bit holder in, and I've tried to put the bit holder next to the Wave but then I can't seem to close the snap button anymore. Maybe the new sheath with side pockets is a bit wider so it can also hold the bit holder
. -
Very nice pics as always TG
Glad you got one and the QC was great for you

-
Congrats and enjoy your tool!
-
:ahhh :ahhh

-
Where did you upload the photos? My browser does not show any :(
-
-
@Top-Gear-24 said:
P.S.: I also bought it because this one doens't have the "+" on the handles (yet ?). If the next batch comes out and those have Wave + on the handles, I will be very happy that I got one of the first batch (collectors ... ::)).All one would need to do is to mod a + head to a standard Wave.

-
Did someone say Spirit??

-
No.
-
P.S.: I also bought it because this one doens't have the "+" on the handles (yet ?). If the next batch comes out and those have Wave + on the handles, I will be very happy that I got one of the first batch (collectors ... ::)).
All one would need to do is to mod a + head to a standard Wave.

Yes, but that would be cheating ...

;)
Are there "regular Wave" handles with the new date codes, I mean did the new style of date codes come with the Wave +, or did they already switch to this style on the previous Wave ? Makes me wonder, are there "regular Waves" with the same date code as the new Wave + ?
My Wave + has date codes 110217 and 110317 in the handles, are there "regular Waves" (I keep calling the previous Wave the "regular Wave", since I can't call it "old Wave" ... ::)).
-
They were already using the new date codes. My new Wave is dated 60517 60917
-
Do the new style plier heads have the crimper on the base of them?
-
Yes. You can (just about) see it over on the left of Top-Gear-24's photo:

-
@hiraethus said:
Yes. You can (just about) see it over on the left of Top-Gear-24's photo:

Ah I missed that's. Thanks.
-
I am really happy that they did keep the rounded plier head vs. the squared off Rebar. This seems to be the best of both worlds with the addition of replaceable cutters. I thought for sure they were just gonna use the rebar head.
This is good news. Thanks for the pics
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
