Victorinox EvoGrip S54 (pic heavy)
-
@zrxoa1 said:
I dug my S54 out tonight. Very interesting SAK. Do they make a sheath for these? I could never carry it in my pocket!
Sent from my iPhone using Tapatalk
I've searched the net for a Sheath for the S54, and I ended up buying three different ones, hoping that one of them would fit. Turned out they all fit :D.
Here are some pics of the different sheaths I got:
First one is the 4.0521.XL sheath, this is one of the sheaths that fits the S54 according to the Victorinox catalogue:




This sheath is perfect for the S54, it's quite a big sheath, but very well made, well known Vic real quality Leather. And the belt loop on the back feels very sturdy
.Next up is the other sheath that Victorinox recommends for the S54 in their catalogue, it's the 4.0481.3 sheath:




This one is a tight fit, and the "Vinyl Leather lookalike stuff" feels very vulnerable. My son has the same sheath for his Swisschamp, and one time he put his Swisschamp in the sheath with the keyring pointing up and it (the sharp end of the key ring) pierced a small hole trough the "Vinyl Leather lookalike stuff" ... This is my least favorite of the three, and the most expensive ... It also has a belt loop system with velcro on the back, again, not my favorite choice.
Last but not least is the 4.0545.3 sheath, this one is made to hold the Swisschamp and a Maglite, so I thought it might just work for the S54. And it does :D.




This one is also made out of a Vinyl Leather combination, but it feels a lot more sturdy than the Vinyl from the previous sheath. This sheath is a tight fit at first, but my S54 has been in it for two weeks and by now it fits like a glove ;). Do make sure to fold the inner loop, which is there to hold the maglite, to the back of the sheath, else it's an even tighter fit. The belt loop is secured with 4 heavy duty rivets and feels indestructible.
Here's a side by side pic:

-
Thank u!!!!
Sent from my iPhone using Tapatalk
-
I ordered this one. Try it first as it seems smaller. Thanks again!!

Sent from my iPhone using Tapatalk
-
Glad I could help
.Like I said, I've searched the net for days, checked all the reviews of the S54 (both Vic and Wenger versions) on youtube to get some info on a possible sheath, but found nothing. So I just ordered these three. I knew that the fake Leather Vinyl one would hold my S54, since I tested it with my son's sheath, so I ordered that one to have at least one that fits. But I was very happy to see that the other two also fit, since they are a lot better made in my opinion.
The best one is the 4.0521.XL sheath in my opinion, a great fit (the other two are pretty tight at first), very well made, real leather, and a beautiful sheath to look at ... It's bit bigger as the others, but then again, it's made to hold a big SAK, right ;).
Edit:
Just saw that you ordered the 4.0545.3 sheath, that's the one I use most of the time just because it's smaller than the 4.0521.XL sheath. That's also the one I use to store my S54 in when I'm not using it. This one is also very well made, and the material feels just bullet-proof. I can't tell you how it holds up after some long-term use, since I've only been using it for about two weeks, but I've got a good feeling about this one ;).
Like I said, it's a tight fit at first, so make sure to stretch it a bit (I've stretched it first with my fingers, then I put the S54 in it and let it sit for a couple of days). And make sure to fold the mag lite holder flat against the back of the sheath. Oh, and don't push the S54 down to the bottom of the sheath the first week. Since it's an 85mm SAK instead of a 91mm SAK it sits a bit deeper, and being a tight fit in the first week, it can be quite difficult to get it back out ... Adding a small lanyard is a good solution for this.
Hope you like it as much as I do
. -
Thank you for the advice!!
Sent from my iPhone using Tapatalk
-
Got mine in today. Will leave the S54 in it to help stretch it, but it fits nicely.
Thanks again for the tip!!

Sent from my iPhone using Tapatalk
-
You're welcome mate
. -
I’m going to let it set in the sheath a bit before I try to carry it. Let it break in.
Sent from my iPhone using Tapatalk
-
@zrxoa1 said:
I’m going to let it set in the sheath a bit before I try to carry it. Let it break in.Sent from my iPhone using Tapatalk
I did the same with mine ;).
Now it fits perfectly, only thing you have to look out for is the lock from the knife, it sticks out a bit and sometimes it catches on the inside of the sheath while pulling the S54 out, but not in a way that it becomes a real problem.
-
I’m going to let it set in the sheath a bit before I try to carry it. Let it break in.
Sent from my iPhone using Tapatalk
I did the same with mine ;).
Now it fits perfectly, only thing you have to look out for is the lock from the knife, it sticks out a bit and sometimes it catches on the inside of the sheath while pulling the S54 out, but not in a way that it becomes a real problem.
I have been taking the SAK out of the sheath and putting it back in. That lock catches badly every time. It might end up being an issue...
Sent from my iPhone using Tapatalk
-
I’m going to let it set in the sheath a bit before I try to carry it. Let it break in.
Sent from my iPhone using Tapatalk
I did the same with mine ;).
Now it fits perfectly, only thing you have to look out for is the lock from the knife, it sticks out a bit and sometimes it catches on the inside of the sheath while pulling the S54 out, but not in a way that it becomes a real problem.
I have been taking the SAK out of the sheath and putting it back in. That lock catches badly every time. It might end up being an issue...
Sent from my iPhone using Tapatalk
I'm sad to hear this mate, like I said, mine catches sometimes (about 1 out of 5), and when I use both hands to get the S54 out it never catches. Pulling on the S54 with one hand, while using thumb and index finger of the other hand to push the front sides, at the edge of the sheath around the height of the velcro patch, together, so this makes for a bit more room above the lock, so it never catches (at least not on my sheath).
I'm wondering, maybe yours is just a bit more tight, or mine a bit more loose, since it only happens occasionally on mine, and on yours it seems like a real problem. I hope it gets better in time.
-
Since I trimmed the inner flap a bit it’s better.
Sent from my iPhone using Tapatalk
-
So, is the EvoGrip 54 welcome as a guest in SwissChamp Sunday? I'll have to ask ...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login