New Leatherman Sheaths
-
I've got my share of LM sheaths of all kinds but I guess maybe it's time to put the old leather ones in a safe place and wear out a bit these new ones,

one of the reasons I stay away from LM Nylon sheaths is the lack of snap button. Don't really like velcro :P
Took them quite a few years to come up with these, but better late than never! ;)
-
I have a couple of old sheaths


-
I have a couple of spares as well

-
I wonder if these sheaths will come with the new style Wave and Charge?
-
@ducttapetech said:
I wonder if these sheaths will come with the new style Wave and Charge?They will DT
Sent from my SM-G935V using Tapatalk
-
Have a medium sheath w/ pockets coming in soon. It shipped out today and got some replacement cutters for a friend's ST300 (He doesn't order anything online).
Wanted to get a couple of MUT Phillips/Standard bits but quite honestly I'm not paying $15 for 3 bits when only 1 of the 3 would be used. Wanted to a longer bit into the K503x knife, and another to use with the Charge TTi. There are times when the normal bits are not long enough for deep recess screws so a longer bit would be most useful. Instead I'll grab a common screwdriver rather than pay $15 for a fancier bit. Heck. I'll go buy a cheap double-sided bit and grind it down on both sides for less.
The leather sheaths would probably do better with the newer snaps. Did not see any newer version sheaths for the PST. The Micro one would of been better if it had a belt clip like the Juice sheaths at the very least. Guess one could use a leather punch and poke two holes in the flap crease and insert a split-ring to use for a different carry option.
-
Sheath came in today. The snap is good and sturdy, unlike previous snaps on leather sheaths.
Will say I'm not overly impressed with the elastic side pockets, as they are 1.75 inches long - not the length of the sheath like previous cases.
Looking at the sheath the left pocket is predetermined to be for flashlights as it has a loop big enough to slip an AAA battery inside. The tight elastic pocket is flat against the sheath.Personally, I prefer the flashlight on right side of the sheath, since I carry the MT on the right hip & Maxpedition case on left hip for smartphones. Getting in and out of a vehicle a lot, especially compacts, could mean a smaller flashlight could work its way out of this wider-looped pocket. Something to keep in mind if you cannot attach a wrist lanyard to your light.
Sheath using Serac S2 in dedicated light pocket

Sheath using LED Lenser M5 in dedicated light pocket - AA lights will have to stretch this pocket out to allow ease of re-insertion.

As light as the nylon sheath is, would recommend inserting MT pliers down. Leather sheaths inherently have more sturdiness & hold MTs pliers up or down. YMMV

The inner elastic material appears to be thicker than previous leather sheaths had.
New Sheath

Previous Charge Badged Leather Sheath - Notice how bad the elastic has gotten over the years. Blek! :ahhh

-
The bottoms have changed, there are no more holes.
Never was a fan of those
holes in the bottom, especially when carrying an MTO Charge Saw and other implements in the back pocket.

Side views of the new sheath with a ReCharge TTi inside. - Yes, I know my MT is a bit dirty, it had gotten used a lot. :D

Profile shots - Top

Bottom

-
Have not dug out a bit card. They are in the back of the TerraTrike Rover's rack pack where I had been carrying the Skeletool CX for its MT. Not a big fan of carrying a bit card in these sheaths. The bit kit + newer bit adapter is best kept in it's own nylon sheath.
About the only thing that I carrying in the back pocket was an MTO Charge Saw, and a PocketToolX Piranha. Since work has frowned down on large MTs and been okay with the Leatherman Flair I put the Piranha in one of those cheap nylon holsters.
Of the newer sheaths, was hoping the small version would fit the original PST, but the PST is 4 inches long ... :( So won't be getting a fancy nylon sheath for the Flair. And these smaller MTs float inside the medium sheath. On the bright side however, the Crunch fits nicely inside the Medium sheath. Might be ordering a single sheath just for the Crunch. :D And I see the small fits the Juice, hmm. Would be a better way of carrying the KF4 over them cheesy clip on sheaths.
Internal Capacities:
• Small: 3.25" x 1.25"x .75"
• Medium: 4.25" x 1.5" x .8"
• Large: 4.75" x 1.5" x .8"Lastly, the new snaps seem to be bite/snap/hold like the original sheaths way back in the early years. Use over time however may, or may not, change this. YMMV
-
Thnaks for the pics Outback
Nice review and compairson as well
I like the look of these new sheaths and may get a couple sizes to try for myself 
-
Got mine in yesterday with the wave plus, it does not have a rear pocket or side pockets, snap is good, fits the belt ok, no horizontal carry option. Wave and older charge fit good and snug, rebar fit is the best. No extra room to pu tin a croc or pirannah, bit kit at all.
-
@stugumby said:
Got mine in yesterday with the wave plus, it does not have a rear pocket or side pockets, snap is good, fits the belt ok, no horizontal carry option. Wave and older charge fit good and snug, rebar fit is the best. No extra room to pu tin a croc or pirannah, bit kit at all.Doesn't the sides have an elastic material, or are the sides nylon?
-
The sides are semi elastic, you could try shoving in a bit kit but you won't be able to snap it shut. I tried my croc, it barely closes and rubs against the tool going in and out. Will be ordering the pocketed one and a small as well.
-
Ahh, okay. I have the belt clip on a Charge TTi. Slide the PTX Piranha inside the back flap, and was able to snap the flap - however the snap was not a full positive snap since there was some resistance. The flap snaps better without the Piranha inside - had a full positive contact on all sides. Tried removing the pocket clip with the same results.
So having something like the Piranha in the back, or a thicker bit card is going to put some resistance on the snap - until the flap has some time to stretch. The flap is two ply, so might take some time to break in.
While the sides do stretch, the flap/main 2-ply nylon material does not. Good find stugumby.

-
Got the small in today with the 4 pocket also. As for the small box is marked 934927 black nylon small, the sheath iteslf has a sticker on it with same number, made in China. Test fit: juice S2 snug, with minor room for expansion outward for Xe6/Cs4 etc. The 4 pocket meduim was test fitted with a swisstool and a spirit, both fit with the spirit having some wiggle room. The juice sheath will hold a 84mm victorinox but not a 91mm.
-
heres some pics
top is with Juice S2 inserted
second is with juice S2
Next is juice cs4, no more room, if you put in a xe6 it will rip out the sides in a week
next is leap, look at the stretch already, barely able to snap it shut. -
Crunch fits well in the Medium, though been carrying it in an original Super Tool leather case.
Guess the small would not allow a PST to fit inside, and know the PST/Flair do okay in the Medium pocketed version - but there is also a wiggle room without having a foam insert placed inside, or a few loops of parachute cord (taped together) inside.
If shipping wasn't $10 I would of ordered a Medium for the Crunch. Should of gotten two sheaths... but I ordered a set of replacement cutters for a plumber friend. He doesn't make purchases online, and even though he offered to pay me, I reminded him of the many fellowship excursions we went on and that was a mere drop in the bucket to thank him. ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


