Wave Plus? Charge Plus?
-
@Glockfan said:
Anybody else receive the wave plus with no + on the scales? LM shows wave + on the site, mine just says wave, with a little different lettering than the old.Just curious
They aren't done with production setup yet.
Sending out old frames with new plier heads just to fill demand at the moment
-
Anybody else receive the wave plus with no + on the scales? LM shows wave + on the site, mine just says wave, with a little different lettering than the old.
Just curious
They aren't done with production setup yet.
Sending out old frames with new plier heads just to fill demand at the moment
Thanks NK, I agree with you. I contacted LM, they wouldn’t give me a direct answer. They asked to see a pic, after seeing it, still no answer. They said I could send it in for replacement, but I told them nah nothings wrong with it. Just wondering.
Did see a YT vid of guy with the exact same thing, from Blade HQ. Think your right
-
I will be buying one of these new plus models in the relatively near future. The biggest reason I did not buy a Wave/Charge in the past was the pliers head, I had a Blast that did everything a Wave did minus the exterior blades. I think this will now be the perfect tool for when I need more than my Skeletool but don't want the weight of my Surge. It will replace my old Blast.
I was using the compare function on Leatherman's website and the comparing the Wave+, Charge+ and Charge+ TTI and in the pictures of them they are all nearly identical as far as blades and tools. Charges+/Charge+TTI has the gut hook the Wave does not but visual it appears all the same tool/blades. But when you look at the tables of features it shows that the Charge+ does not have scissors or the medium flat screw driver blade but instead has two large bit drivers (this is mirrored on the Charge+ page). Yet the video link earlier in the thread shows a Charge+ with the scissors and medium flat screw drive blade.
I am leaning towards the Black Oxide Wave+ but I really could make use of the gut hook so that draws me towards the Charge+ but I would not want to give up the scissors. It appears for now they are shipping Charge+ as pictured it will be interesting to see if they start shipping Charge+ as listed or if they correct the table.
-
The sheath looks good but the lack of side pockets for a bit extender is really weird. Did anybody already perform a test for those new pliers and replaceable wire cutters?
-
@alexanderre said:
The sheath looks good but the lack of side pockets for a bit extender is really weird. Did anybody already perform a test for those new pliers and replaceable wire cutters?They were doing two version of the new nylon sheath. One with two pocket, one for the tool, one for the card of extra bits. And then a version that has those to pockets and the addition of the two side elastics for bit extender, pens, etc.

This simpler one they are doing in Small, Medium, and Large

This one only comes in Medium and Large.
-
Why, in all of tarnation, does Leatherman keep putting cap crimpers on the TTi?
Leatherman should, AT LEAST, offer a non-capcrimper version of the TTi, but them ugly scales... I'm content with v1.0 scales. Have Rebar pliers in there too, although the tool does not close up completely ... probably cause I removed the metal-toothpick (LOL) for a much more needed awl. -
@Outback in Idaho said:
Why, in all of tarnation, does Leatherman keep putting cap crimpers on the TTi?
Leatherman should, AT LEAST, offer a non-capcrimper version of the TTi, but them ugly scales... I'm content with v1.0 scales. Have Rebar pliers in there too, although the tool does not close up completely ... probably cause I removed the metal-toothpick (LOL) for a much more needed awl.When I looked at Leatherman's booth at Shot Show I saw Wave+, Charge+ and Charge+ TTI all with and without the primer crimp pliers head. The Leatherman rep there said they have always offered them in both pliers heads. I didn't argue with him.
-
@Outback in Idaho said:
Why, in all of tarnation, does Leatherman keep putting cap crimpers on the TTi?
Leatherman should, AT LEAST, offer a non-capcrimper version of the TTi, but them ugly scales... I'm content with v1.0 scales. Have Rebar pliers in there too, although the tool does not close up completely ... probably cause I removed the metal-toothpick (LOL) for a much more needed awl.When I looked at Leatherman's booth at Shot Show I saw Wave+, Charge+ and Charge+ TTI all with and without the primer crimp pliers head. The Leatherman rep there said they have always offered them in both pliers heads. I didn't argue with him.
This must be his first job after coming down from a mountain..
-
I think I’m going to get a BO Wave + ::) 8)
-
@Grant Lamontagne said:
It's nice to see Leatherman continuing their longstanding tradition of producing tools that members here have already made. :DWhich I am certain were a process of "simultaneous development" and were not ideas sourced from here, naturally....

Def
Yeah! How many years did it take Leatherman to catch up this time? Still... why do they put that metal-toothpick in there? Don't supposed it's because they have nothing else to go in there that will fit? Wave/Charge with an awl, ditch that eyeglass screwdriver.
Leatherman could renovate the large bit driver to accommodate the mini screwdriver hole in there too. But what would they put in place of that. Surely not an awl, no no, can't put something in there that customers want. That would be unheard of.
Wave's scissors aren't the best overall anyhow, put an awl in there for the working man. Oops! Spoke out of turn again.

-
@Outback in Idaho said:
Why, in all of tarnation, does Leatherman keep putting cap crimpers on the TTi?
Leatherman should, AT LEAST, offer a non-capcrimper version of the TTi, but them ugly scales... I'm content with v1.0 scales. Have Rebar pliers in there too, although the tool does not close up completely ... probably cause I removed the metal-toothpick (LOL) for a much more needed awl.When I looked at Leatherman's booth at Shot Show I saw Wave+, Charge+ and Charge+ TTI all with and without the primer crimp pliers head. The Leatherman rep there said they have always offered them in both pliers heads. I didn't argue with him.
Only way I got that to happen was sending in the Charge TTi after some stuff broke over the years. I asked if they could replace the pliers with standard pliers, no cap crimper! That one time they put normal pliers in.
-
@stugumby said:
Ok, so it seems a lot of viewers are commenting on the removable wire cutters. i have only broken 1 plier head in my days, it was on a Gerber mp 400 and it snapped under minimal pressure while holding a small bolt while replacing the rubber stripping on an abrams tank front track guard/fender. So my question is, what exactly breaks when one has the replaceable wire cutter? Is it the possibility that the screw snaps off and the cutter come apart, or the plier head itself snapping at the thinnest point just above the cutters? They seem to be indented into the head a bit to relieve the stress on the screw. I have a rebar, surge and signal with them and havent had any problems with pliers etc. Or perhaps its a twisting/flexing that could strip out the screw over time?I plan on getting both of them eventually, i have a self imposed ban on impulse buys, must sell one to buy one type of thing.
Also do the new sheaths have the horizontal carry option?
I am not sure what these MT designers had in mind when designing these replaceable cutters. On indexable mills or drills, the threaded hole is not exactly concentric with the insert hole. It means, there is a friction between the screw and the side of the insert hole, and the crew pushed the insert against the tool pocket's wall. So, the tool body will absorb the cutting shock, and the screw simply holds the insert in place. The screw is more likely stripped on the torx profile from being too tight than getting sheared off. I hope these tools were designed with same methodology.
-
here's my detailed photo session (picture heavy!) for Wave Charge PLUS models I made for polish knife forum....
Leatherman Charge/Wave PLUS z wymiennymi przecinakami - prezentacja i testy
Po raz kolejny, dzięki serwisowi Militaria.pl miałem okazję zapoznać się i zaprezentować Wam trochę bardziej szczegółowo najnowsze wersje bardzo popularnych i lubianych multitooli Leatherman. Modele Charge TTI PLUS, Charge PLUS, WAVE PLUS, WAVE PLUS BL...
knives.pl - ostra dyskusja (forum.knives.pl)


I hope that will help a bit to make a decision ;)
Tom -
@tap78 said:
here's my detailed photo session (picture heavy!) for Wave Charge PLUS models I made for polish knife forum....
Leatherman Charge/Wave PLUS z wymiennymi przecinakami - prezentacja i testy
Po raz kolejny, dzięki serwisowi Militaria.pl miałem okazję zapoznać się i zaprezentować Wam trochę bardziej szczegółowo najnowsze wersje bardzo popularnych i lubianych multitooli Leatherman. Modele Charge TTI PLUS, Charge PLUS, WAVE PLUS, WAVE PLUS BL...
knives.pl - ostra dyskusja (forum.knives.pl)


I hope that will help a bit to make a decision ;)
TomI can't get all the pics to load on that site... could you post the pics for 'LEATHERMAN WAVE PLUS - TESTING' here please.

-
@tap78 said:
here's my detailed photo session (picture heavy!) for Wave Charge PLUS models I made for polish knife forum....
Leatherman Charge/Wave PLUS z wymiennymi przecinakami - prezentacja i testy
Po raz kolejny, dzięki serwisowi Militaria.pl miałem okazję zapoznać się i zaprezentować Wam trochę bardziej szczegółowo najnowsze wersje bardzo popularnych i lubianych multitooli Leatherman. Modele Charge TTI PLUS, Charge PLUS, WAVE PLUS, WAVE PLUS BL...
knives.pl - ostra dyskusja (forum.knives.pl)


I hope that will help a bit to make a decision ;)
TomFantastic review and pics !
As I suspected the pliers with be plenty strong and up the most tasks.

-
@tap78 said:
here's my detailed photo session (picture heavy!) for Wave Charge PLUS models I made for polish knife forum....
Leatherman Charge/Wave PLUS z wymiennymi przecinakami - prezentacja i testy
Po raz kolejny, dzięki serwisowi Militaria.pl miałem okazję zapoznać się i zaprezentować Wam trochę bardziej szczegółowo najnowsze wersje bardzo popularnych i lubianych multitooli Leatherman. Modele Charge TTI PLUS, Charge PLUS, WAVE PLUS, WAVE PLUS BL...
knives.pl - ostra dyskusja (forum.knives.pl)


I hope that will help a bit to make a decision ;)
Tompicture heavy indeed! Such beautiful pics!

-
@tap78 said:
here's my detailed photo session (picture heavy!) for Wave Charge PLUS models I made for polish knife forum....
Leatherman Charge/Wave PLUS z wymiennymi przecinakami - prezentacja i testy
Po raz kolejny, dzięki serwisowi Militaria.pl miałem okazję zapoznać się i zaprezentować Wam trochę bardziej szczegółowo najnowsze wersje bardzo popularnych i lubianych multitooli Leatherman. Modele Charge TTI PLUS, Charge PLUS, WAVE PLUS, WAVE PLUS BL...
knives.pl - ostra dyskusja (forum.knives.pl)


I hope that will help a bit to make a decision ;)
TomNice set of excellent photos!

I find it interesting that the black Wave+ gets a different sheath. I was coming here to post about that when I saw this post. I was at Cabelas today and they had both of the new Wave+ and the regular silver one had Cabelas on the one handle and came with the new sheath while the Wave+ Black did not have Cabelas logo and came with the older sheath as picture is this excellent set of photos.
I really want a black Wave+ but I sort of want the new sheath also... ???
-
I just noticed that Leatherman got rid of the name plates on the Charge AL scales. So it is all cost cutting and efficiency now, huh?
-
I saw a video on youtube and it said only for sale in the US, is the + tools not coming to Europe?
-
@aikon2014 said:
I saw a video on youtube and it said only for sale in the US, is the + tools not coming to Europe?They are already here mate :D.



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login