Hard time sharpening
-
Btw it's the OCD demon in me that won't let me rest until the knives I sharpen are as sharp as I want it to be, do it bothers me when I can't achieve that. :D >:D
-
Victorinox blade steel is a bit on the soft side. I haven't been able to get a SAK blade to the same point I do my other knives either, so I suspect the steel material and lack of grind have something to do with it. Somebody may chime in who can cut molecules in half with their SAK, but it sure as smurf won't be me.

-
Take a loop or something to magnify the apex. My guess is it might very well be a rounded over edge. What my guess is is when stropping you've slightly round your apex. Use a harder substrate, many use balsa wood no leather. If you are using leather it should be firn with little nap. Use a very light tough, almost no pressure and don't spend a bunch of time stropping. You'll need to correct the edge now then re-strop.
SAK steel is on the soft side so a lighter hand will be needed. What works for harder steels may not always work with SAKs. Re set your bevels and check the apex. Is it how you like it and are now just refining? If yes then lightly strop with only a few strokes on each side. You'll have to play around a bit some. You'll get there.
-
I'm a molecule cutter and can attest to the fact that SAKs can get just as sharp as any other knives. While I tend to avoid doing this, it will get a sharp edge: just sharpen one side with the diamonds until you can feel on obvious burr (the edge folding over to the other side) and then do the other side the same way and then use very light touches alternating sides to remove any burr.
-
Thank you for all the tips! It makes a bit more sense now! :)
Had no idea that the steel is softer than others. -
I have a Fallkniven DC4 myself, but i'm not a big fan of it for sharpening a SAK. I know other people here love them, so it's probably a matter of personal preference.
I sharpen my SAKs with a set of sharpening stones varying in grit. I have a set similar to this one. I don't always use all the grits, when a knife only needs a bit of touching up, I may only use 2000 and 5000. If the blade is chipped, burred, extremely blunt or otherwise in bad condition I start with the roughest grit and work my way up to 5000.
I always finish with stropping.
This will get your blades razor sharp.
-
The only thing I can add, it is an old timers trick. Try stroping on a smooth knothole free piece of 2x4.. There is a learning curve to this one as the amount of pressure used and the angle you drag the blade make a big difference. Drag the blade at about a 60 degree angle instead of 90. I will add hold the blade at 90 just dont drag at 90.
-
O just tried stroping it with according to my hands and feel, no pressure at all. I usually use the weight of the knife as pressure, but this time I almost had nothing there, and it actually improved!
Thanks for all the tips!
-
With SAKs I use ceramic rods/sticks like this but since I started stropping on old leather strips/belts I had a few years ago I also reached a new level of sharpness


-
I used to strop endlessly. I had to learn that enough was enough on some knives. I re beveled a Swisschamp I had and wow what a flipping scalpel. While Vic sends their knives really sharp this one was well beyond. I finished the edge off with green compound then Diamond spray. I've never had a SAK this sharp before. I typically use my Spyderco ceramic rods then a quick strop on green compound on a hard leather strop. Maybe 10 passes each side but not much more.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login