Skip to content
  • Categories
  • Recent
  • Popular
  • World
Skins
  • Light
  • Dark

Collapse

NodeBB

Multitool TLC

Scheduled Pinned Locked Moved The Mod Squad
109 Posts 1 Posters 136.5k Views
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • S
    S
    shadowulf
    wrote on last edited by
    #91

    @detron said:

    @TheAverageJoe said:

    Personally I swear by ballistol (a rather good oil) on edc items once every couple months. other items once when it looks like they need it. its the duct tape of oils imho (plus you could probably drink it its that food safe) another upside is it eats rust!

    was not familiar with this product, it does look safe, but the warning is sort of odd

    Ballistol does not contain ingredients considered hazardous by the FDA. It does not contain any ingredients which may be harmful for warm-blooded organisms, reptiles or aquatic organisms (if used as directed). If swallowed, DO NOT INDUCE VOMITING, ASPIRATION CAN OCCUR. CONSULT A PHYSICIAN IMMEDIATELY.

    if it is so safe, why do I need to contact a physician?

    Balistol has mineral spirits as an ingredient, fairly safe for external use, not good for internal use.

    It's one of my favorites for use with my "wood & steel" guns. It is safe for most finishes and handy for treating and removing rust. That said, it's okay for a protective oil. It can be washed off, but pretty durable otherwise.

    I've been tempted to run my LMs through the dishwasher, after a citrus degreaser. But usually, I rinse them in clean water and apply a good gun lube to the pivots. Then work the lube into the pivot, wiping the dirt/rust/grime away as it works out of the pivot joint.

    This usually works well for several months, but I try to do this every 3 to 4 months. It's a habit I got into being in a trade that uses hand tools all the time.

    1 Reply Last reply
    0
    • Joseph GonzalezJ
      Joseph GonzalezJ
      Joseph Gonzalez
      wrote on last edited by
      #92

      @NeitherExtreme said:
      Just had a funny picture run through my head. I know some people with access to an air compressor use them to clean out their tools. I don't have any to use, and I was thinking about where I could go to use one. I remebered that they have compressors at gas stations to fill tires, and then I just pictured myself standing in a parking lot outside a gas station using the compressor to clean multi-tools... 😄 Truly absurd! What won't I think of next.

      If you do it, make sure to post a video on YouTube! Be sure to include people's reactions after they walk up and ask you what you're doing! :facepalm:

      1 Reply Last reply
      0
      • B
        B
        benjigoh
        wrote on last edited by
        #93

        hi guys, anyone here has got problem with their LM developing spot rust? I currently own a Wave and started noticing that the LM is having rust spots all over it. I have taken it apart once and tried to remove as much of it as possible. However a couple of weeks later, the spots are back. And this time round I think they bought a couple of backups along. Any idea on how I can prevent them from appearing? Kinda reluctant to soak the whole unit into oil. TIA. Cheers 😉

        1 Reply Last reply
        0
        • V
          V
          Vidar
          wrote on last edited by Vidar
          #94

          Most stainless steels are stainless because the chrome will react with oxygen on the surface and make a thin surface film that prevents rust. If that surface film is disturbed or scratched the exposed chrome will again react with oxygen and form a new film. This works great in air.

          It might still rust in environments or in spots if the surface is contact with something that breaks down the film faster than it can heal. That might be case if coming into touch with aggresive acids or salts - and in particular if combined with blockage of oxygen, or generally little oxygen in the environment. (Most stainless will suffer in common sea water). Basically cleaning and polishing so nasty stuff don't get stuck often helps. (Victorinox doesn't polish their stuff just to make it look shiny).

          Another common issue is surface contamination with non-stainless steel. Such inclusions will rust, and they are easier to get than you'd think. Brushing using non stainless steel brushes, or tools/ sharpeners used with normal steel, rough contact with normal steel, or even worse welding spatter, will tend to start surface rust going.

          Not sure if any of those apply to your case, but things to have in mind for the common stainless steel types.

          1 Reply Last reply
          0
          • Don PabloD
            Don PabloD
            Don Pablo
            wrote on last edited by
            #95

            It is TLC related... :whistle:
            What's the highest sandpaper grit you need when polishing sak tools and scales? :think:
            1500? 9000?

            1 Reply Last reply
            0
            • Don PabloD
              Don PabloD
              Don Pablo
              wrote on last edited by
              #96

              I guess no one reads El stickies. 😄

              1 Reply Last reply
              0
              • M
                M
                Mechanickal
                wrote on last edited by
                #97

                @Pablo O'Brien said:
                I guess no one reads El stickies. 😄

                You should have known...

                1 Reply Last reply
                0
                • zoidbergZ
                  zoidbergZ
                  zoidberg
                  wrote on last edited by
                  #98

                  :rofl:

                  1 Reply Last reply
                  0
                  • dksD
                    dksD
                    dks
                    wrote on last edited by
                    #99

                    1 Reply Last reply
                    0
                    • Don PabloD
                      Don PabloD
                      Don Pablo
                      wrote on last edited by
                      #100

                      Spoiler alert: Pabs was in the tumble weed.

                      1 Reply Last reply
                      0
                      • M
                        M
                        Mechanickal
                        wrote on last edited by
                        #101

                        @Pablo O'Brien said:
                        Spoiler alert: Pabs was in the tumble weed.

                        Seeing how many turns it made...
                        Plausible

                        1 Reply Last reply
                        0
                        • MastyrOfPuppitzM
                          MastyrOfPuppitzM
                          MastyrOfPuppitz
                          wrote on last edited by
                          #102

                          After over half a decade last week my Charge ALX got minor service. Sprayed with WD-40. Cleaned out using a paper towel, q-tips, and a Gum soft pick. Then I coated with WD-40 silicone spray and wiped off with a rag.

                          1 Reply Last reply
                          0
                          • JustinCaseJ
                            JustinCaseJ
                            JustinCase
                            wrote on last edited by
                            #103

                            @MastyrOfPuppitz said:
                            After over half a decade last week my Charge ALX got minor service. Sprayed with WD-40. Cleaned out using a paper towel, q-tips, and a Gum soft pick. Then I coated with WD-40 silicone spray and wiped off with a rag.

                            Good choice in lubricant :tu: The water resistant WD-40 SpeSmurfpillst silicone is fantastic! I really like it because is not as heavy as lithium lubricant. Barely spritzed on my multi-tools and pocket knives and they open/close super smooth. A great product for small tools.

                            1 Reply Last reply
                            0
                            • comisC
                              comisC
                              comis
                              wrote on last edited by
                              #104

                              Just read the WD40 comment, and just wanna share some of my experience.

                              Long ago I stored a Wave in a plastic drawer, thinking with the WD40 bath it took and the dry weather, it should be safe for long term storage.

                              I kinda forgot about that Wave in the drawer, and many months later, it developed rust across the entire handle and within the tools. All the other LMs have survived more humid weather with no lube(except joints), but how wrong I was about WD40 and its 'rust prevention'.

                              Till this day, I still don't thoroughly understand what might have happened, but hardly any rust spots have developed ever since I abandoned using WD40.

                              1 Reply Last reply
                              0
                              • S
                                S
                                Scorpion Regent
                                wrote on last edited by
                                #105

                                To clean out tight spaces I twist up a small scrap of paper into a rigid swab. Occasionally I rinse out my SAKs and GAK with water. For my every day MTs and knives I use what ever oil is handy, very often it's cooking oil. The tools and knives that get stuck in drawers I grease with Sil Glyde. I use compressed shop air to blow out dirt and grime a couple times a year. I have never encountered a knife or multi tool that required chemicals to clean, but I would use brake clean spray if I did.

                                1 Reply Last reply
                                0
                                • S
                                  S
                                  Scorpion Regent
                                  wrote on last edited by
                                  #106

                                  @comis said:
                                  Just read the WD40 comment, and just wanna share some of my experience.

                                  Long ago I stored a Wave in a plastic drawer, thinking with the WD40 bath it took and the dry weather, it should be safe for long term storage.

                                  I kinda forgot about that Wave in the drawer, and many months later, it developed rust across the entire handle and within the tools. All the other LMs have survived more humid weather with no lube(except joints), but how wrong I was about WD40 and its 'rust prevention'.

                                  Till this day, I still don't thoroughly understand what might have happened, but hardly any rust spots have developed ever since I abandoned using WD40.

                                  I had a similar experience with WD 40. I stored tools coated with WD 40 inside a sealed ammo can 6 months later they were covered in rust. I won't buy it any more and only use it as a last resort.

                                  1 Reply Last reply
                                  0
                                  • V
                                    V
                                    Vidar
                                    wrote on last edited by
                                    #107

                                    @Scorpion Regent said:
                                    I have never encountered a knife or multi tool that required chemicals to clean, but I would use brake clean spray if I did.

                                    I'll just add that one need to be careful with brake cleaning products, and in particular those for spraying which disperses all around in the air. Quite a few brake cleaning products contain hydrofluoric acid. While that no doubt makes them effective it also puts them firmly in the dangerous category.

                                    Hydrofluoric acid is not only an acid and a poison if you eat or breath it, but also a contact poison. Thus if you get some on your skin it will go into your system. Once entered in some way it does the full range from flu sympoms and skin destruction, via serious diseases and bone dissolving, to causing cardiac arrest or internal organ failure. Hydrofluoric acid do maim and kill people so please be aware of it and treat it with respect if you have to use it.

                                    Personally I don't consider cleaning wheels or anything else important enough to risk exposure, so I make sure any such products don't contain hydrofluoric acid before I get them. (To the degree I trust the brand product label in the first place that is).

                                    1 Reply Last reply
                                    0
                                    • T
                                      T
                                      TX Tool Crib
                                      wrote on last edited by
                                      #108

                                      After adding a cable cutting tool to my Leatherman Surge, I decided to modify it to fit my needs. I will be adding and modifying several things going forward in the hope of building my perfect multi tool.

                                      https://youtu.be/b5O_PaNl9x4

                                      1 Reply Last reply
                                      0
                                      • T
                                        T
                                        tom q vaxy
                                        wrote on last edited by
                                        #109

                                        @J-sews said:
                                        ....one grain between the pivots gives me the heebie-jeebies. ...

                                        omg; he said "heebie-jeebies!"

                                        1 Reply Last reply
                                        0

                                        Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                        Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                        With your input, this post could be even better 💗

                                        Register Login

                                        • Login

                                        • Don't have an account? Register

                                        • First post
                                          Last post
                                        0
                                        • Categories
                                        • Recent
                                        • Popular
                                        • World