How do you open a tiny gate clip?
-
@lew said:
Thanks for the suggestions. I can get things on and off but with difficulty. Strangely, I can get things off more easily than on. I use it with the Workchamp and usually just let it dangle, but it's a pain when using the phillips and cap lifter. I could use the Rebar instead but I'm sort of doing an unofficial 30-day Workchamp challenge while carrying both. I could belt carry but that's where my Rebar is. Possible solution: Victorinox Multiclip under the Rebar sheath?
I think I like this. I'm going to carry this way for a week or so and see how it does.
-
I may have misunderstood. Do you need to be able to remove the knife from the clip frequently? (I guess I thought you left it on the gated clip.)
-
When I attach a split ring to a clip, I rarely press in the clip jaw/the wire part with a finger. I hold the clip body and the split ring, and simply push the split ring onto the clip (using the ring itself to press the jaw).
-
@Nix said:
I may have misunderstood. Do you need to be able to remove the knife from the clip frequently? (I guess I thought you left it on the gated clip.)Yes. I want to be able to pull out the knife, disconnect the clip, use the knife, and reconnect it. Not a problem with belt carry or the Multiclip. Works great with S-Biners but it rides too low in my pocket.
-
@Steinar said:
When I attach a split ring to a clip, I rarely press in the clip jaw/the wire part with a finger. I hold the clip body and the split ring, and simply push the split ring onto the clip (using the ring itself to press the jaw).Thanks. That's how I've been doing it, but I want to EASILY take my SAK on and off. I guess most people leave it on once attached and it's not a problem.
-
Ahhh....
Is it possible to snag the gate with the side of your thumbnail to remove the SAK?

Then, as Steinar suggests, use the split ring to press the gate open and pop the SAK back on the clip?
Seems like too much bother to me, all around. I just let SAKs sit in the bottom of my pocket. But, then, that's probably why I only carry 4-layer or smaller SAKs.
-
Is it possible to snag the gate with the side of your thumbnail to remove the SAK?

Then, as Steinar suggests, use the split ring to press the gate open and pop the SAK back on the clip?
Seems like too much bother to me, all around. I just let SAKs sit in the bottom of my pocket. But, then, that's probably why I only carry 4-layer or smaller SAKs.
It's too stiff for my thumbnail. The Workchamp is a bit of a brick when laying in my pocket. I don't know it's there with a pocket clip, belt clip, or a sheath. The funny thing is, I'm still running in circles to get the Workchamp carry just right; the Rebar/Raine Horizontal Knife Sheath combination was perfect from the start.
-
Workchamp is a 111mm, right?
That's a big tool. Probably best suited for a belt sheath/pouch.
-
Multiclip and P-7 both work great; very comfortable carry. Belt sheath is also comfortable, and if I ever decide to stop carrying the Rebar, I may try that.
-
Only room for 2 sheaths on my belt and my phone takes one.
-
I was thinking that an alternative approach would be to fix a clip on your belt and use a loop of cord to go from the clip down through the split ring on the SAK and then back to the clip on your belt.
I've done something like this in the past and it has worked out well.
-
When I attach a split ring to a clip, I rarely press in the clip jaw/the wire part with a finger. I hold the clip body and the split ring, and simply push the split ring onto the clip (using the ring itself to press the jaw).
Thanks. That's how I've been doing it, but I want to EASILY take my SAK on and off. I guess most people leave it on once attached and it's not a problem.
Hm. Got it. Could you use the side of the toothpick in the Workchamp to open the clip? Sounds a little cumbersome, I guess.
-
Or, if looks is not a priority, you could add one of these. I think they're ugly, but they're certainly quick and convenient.

-
@Nix said:
I was thinking that an alternative approach would be to fix a clip on your belt and use a loop of cord to go from the clip down through the split ring on the SAK and then back to the clip on your belt.I've done something like this in the past and it has worked out well.
I'll have to try that. I'm really liking the Vic Multiclip. It fits between and under the Rebar sheath and the SAK rides high enough in my pocket that I don't even know it's there. And, it's not too noticeable. My wife says she feels like she's married to a cop when she puts her arms around me when I'm carrying 3 sheaths.
-
Figured it out. I was letting the split ring dangle freely while trying to slip it on. By holding both the clip and the ring firmly, the ring slips by my fat fingers and on or off the clip. I've finally settled on how to carry my tools - time to worry about something else.
-
;) -
@lew said:
Figured it out. I was letting the split ring dangle freely while trying to slip it on. By holding both the clip and the ring firmly, the ring slips by my fat fingers and on or off the clip. I've finally settled on how to carry my tools - time to worry about something else.I was about to say that...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
