Show off your Sak mod's!
-
The bushings that I peen the pivot at, which side of the bushing should be turned outward? It's the wider right? F.... Ah well, will try a third time sometime later ;)
Sent from my SM-G935F using Tapatalk
Yes the wider side should look outwards.
Good luck!For a better illustration...

Sent from my iPhone using Tapatalk
Thanks.
The way I built it up is:
- Opener layer
- Knife layer
- Wood saw layer
- Knife layer
- Opener layer
So one of the recruits are reversed. This makes the small knife+ keyring thingie reversed too and some other results because of the way I want it in the layer order. The opener layers "has" to be the furthest out so I can use them the way they are intended (wood chisels) (picture 1)
Knife layers are pretty straight forward. Two wharncliffes, one clip point and one sheepfoot. Blades are currently functional but ugly AF. (picture 2)
Wood saw layer is probably the only one I have not screwed up yet [emoji28] (picture three)
Last but worst is that the clue that the toothpick/pincer is on opposite side of the keyring (picture 4) which means I pretty much assembled everything wrong HAHA!




I'm having a very good time with this, albeit very humbling. I wrong into the project with a clear idea what I wanted, clear expectations of success and a 100% "Jesus take the wheel" attitude and my ad hoc way of doing things. Some times things work out, some times they don't and you learn something instead.
Sent from my Victorinox Climber using Tapatalk
-
Ok! Forth time's the charm! We don't talk about the third.
Got it all together now, sorted out nailnicks and started evening out the rough areas.

Sent from my SM-G935F using Tapatalk
-
When you turned the bottle opener into a chisel, did you use a grinder or just a stone and/or sandpaper? And what angle?
I've been thinking about doing something similar with a spare Camper.
-
@ironraven said:
When you turned the bottle opener into a chisel, did you use a grinder or just a stone and/or sandpaper? And what angle?I've been thinking about doing something similar with a spare Camper.
And does it keep an edge? I tried getting an edge on the inside of the of the opener, like on the older models, but couldn't seem to get it any sharp. Might just be me though.
-
I used a Mora diamond sharpener. It didn't really take much time and while, due to the steel , you have to go over the edges when you whittle every now and then, the chisels really surprised me at how well they work!
The second set of openers on the other side of the layers are curved (concave) to give me more options. The canopener tool turned out to be too narrow to make concave so it it more V-shaped atm which is good for making lines.
I'm reassembling it all together tomorrow againto see if I can get a 5 layer 84mm to work. So far I've done rookie mistakes but learned each time so hopefully this v4.5 will be ending nicely. If not I might reconsider the wood saw layer to keep it more compact.
Speaking of compact ! I got impressed by someone's compact with wood saw earlier so I might do that as I will have a spare saw.
Back again about sharpening- uttering a Tormek t4 would be best but not needed. Victorinox steel is rather easy to reshape.
Sent from my wood fire using smoke signals
-
@stoneshank said:
I used a Mora diamond sharpener. It didn't really take much time and while, due to the steel , you have to go over the edges when you whittle every now and then, the chisels really surprised me at how well they work!The second set of openers on the other side of the layers are curved (concave) to give me more options. The canopener tool turned out to be too narrow to make concave so it it more V-shaped atm which is good for making lines.
I'm reassembling it all together tomorrow againto see if I can get a 5 layer 84mm to work. So far I've done rookie mistakes but learned each time so hopefully this v4.5 will be ending nicely. If not I might reconsider the wood saw layer to keep it more compact.
Speaking of compact ! I got impressed by someone's compact with wood saw earlier so I might do that as I will have a spare saw.
Back again about sharpening- uttering a Tormek t4 would be best but not needed. Victorinox steel is rather easy to reshape.
Sent from my wood fire using smoke signals
I see, guess I'll try to invest a little more time then and see if that solves it.
-
-
great mods
I made some stagalike scales from micarta for my Super Tinker
I'll do some for my waiter next 

-
@hiraethus said:
My latest creation:

Yeah, OK, it's a Climber and the only thing out of the ordinary is the ground-off keyring loop. But I made it from leftovers because a) I don't have a three layer SAK with scissors and 2) I haven't built a SAK for at least a year. Good to be back at it. :DAre those white scales? ???
-
No, yellow. smurfty photo. :P
-
Latest work! Used the wrong liner and will change the scales after it is used for a while.. Knife less and thanks Pablo for some tips
[It's not failure if you learn something from it]

-
@kottskrapa said:
Latest work! Used the wrong liner and will change the scales after it is used for a while.. Knife less and thanks Pablo for some tips[It's not failure if you learn something from it]

Nice work! Good to see more bladeless mods recently

-
Latest work! Used the wrong liner and will change the scales after it is used for a while.. Knife less and thanks Pablo for some tips
[It's not failure if you learn something from it]

Nice work! Good to see more bladeless mods recently

Thanks! Yes and I got really inspired.. Feels good to have an option other than the style ps for when not being able to bring something with a blade
[It's not failure if you learn something from it]
-
Very nice.

But then again, I’m biased. :D :P
What spring did you use for the openers, and have you done anything to the bottle opener end of it? -
@Pablo O'Brien said:
Very nice.

But then again, I’m biased. :D [emoji14]
What spring did you use for the openers, and have you done anything to the bottle opener end of it?I suspect you mean me.. I used the blade spring and did remove some material for the bottle opener and used som 0.4mm brass spacer.
[It's not failure if you learn something from it]
-

Can’t go wrong with that SAK, it looks.
Does it have a name? :DAny future mod plans?
-
@Pablo O'Brien said:

Can’t go wrong with that SAK, it looks.
Does it have a name? :DAny future mod plans?
It is made for the occasion of drinking beer and barbecuing in the park or when going to festivals etc when a blade is not really suitable. The scissors can still open up food packages.. Beer and barbecue so it is my B&B SAK and the full opening layer for all cans and bottles I come across.
No other mods so far. I'm quite happy with this one for "drunk" times and my expedition for pretty much all other days. The kids really like the magnifying glas and saw on that one and wants some of their own.
But I'm thinking of making a couple more blade less for the kids and let them use their fixed blade knife for a couple of more years before getting a proper SAK
[It's not failure if you learn something from it]
-
@Pablo O'Brien said:

Can’t go wrong with that SAK, it looks.
Does it have a name? :DAny future mod plans?
It is made for the occasion of drinking beer and barbecuing in the park or when going to festivals etc when a blade is not really suitable. The scissors can still open up food packages.. Beer and barbecue so it is my B&B SAK and the full opening layer for all cans and bottles I come across.
No other mods so far. I'm quite happy with this one for "drunk" times and my expedition for pretty much all other days. The kids really like the magnifying glas and saw on that one and wants some of their own.
But I'm thinking of making a couple more blade less for the kids and let them use their fixed blade knife for a couple of more years before getting a proper SAK
[It's not failure if you learn something from it]
Sounds like a good plan.

I was also thinking of extra bladeless SAKs, in this case for my younger siblings.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login