Leatherman PST chronology project
-
Hey guys need some help to identify the manufacturing date for this. Tried looking at the first post but some features doesn't match up.. Or maybe I am a little blind.. Got it off Ebay. Not the best condition specimen, but probably not that commonly seen. Thanks in advance! As far as I can tell, there's only "leatherman" stamped on the blade.


-
@Sam Lim said:
Hey guys need some help to identify the manufacturing date for this. Tried looking at the first post but some features doesn't match up.. Or maybe I am a little blind.. Got it off Ebay. Not the best condition specimen, but probably not that commonly seen. Thanks in advance! As far as I can tell, there's only "leatherman" stamped on the blade.That is what I call a Japanese v5 PST. There are no dates on the handles, but it was the last PST that was made for Leatherman in Japan. I would guesstimate as late 80's to early 90's. Some v5s had "hollow" rivets (the very early ones ?), but most had solid rivets like your example.
It is the most common JPST, but still not that common (there are a lot more PSTs made in the US). A nice piece of LM history

-
@Sam Lim said:
Hey guys need some help to identify the manufacturing date for this. Tried looking at the first post but some features doesn't match up.. Or maybe I am a little blind.. Got it off Ebay. Not the best condition specimen, but probably not that commonly seen. Thanks in advance! As far as I can tell, there's only "leatherman" stamped on the blade.
That is what I call a Japanese v5 PST. There are no dates on the handles, but it was the last PST that was made for Leatherman in Japan. I would guesstimate as late 80's to early 90's. Some v5s had "hollow" rivets (the very early ones ?), but most had solid rivets like your example.
It is the most common JPST, but still not that common (there are a lot more PSTs made in the US). A nice piece of LM history

👌 thanks! It's really confusing when there are so many versions but then thats what makes them so collectable!
-
@Sam Lim said:
Hey guys need some help to identify the manufacturing date for this. Tried looking at the first post but some features doesn't match up.. Or maybe I am a little blind.. Got it off Ebay. Not the best condition specimen, but probably not that commonly seen. Thanks in advance! As far as I can tell, there's only "leatherman" stamped on the blade.
That is what I call a Japanese v5 PST. There are no dates on the handles, but it was the last PST that was made for Leatherman in Japan. I would guesstimate as late 80's to early 90's. Some v5s had "hollow" rivets (the very early ones ?), but most had solid rivets like your example.
It is the most common JPST, but still not that common (there are a lot more PSTs made in the US). A nice piece of LM history

I agree with Greg in everything, except that it was the last PST that was made for Leatherman in Japan.
Last JPST version has "REG’D TM 1325473" on handles.
On Sam Lim's item is "US REG’D TM 1325473" - it's penultimate version of JPST and was produced in second half of 80's. -
@Sam Lim said:
Hey guys need some help to identify the manufacturing date for this. Tried looking at the first post but some features doesn't match up.. Or maybe I am a little blind.. Got it off Ebay. Not the best condition specimen, but probably not that commonly seen. Thanks in advance! As far as I can tell, there's only "leatherman" stamped on the blade.
That is what I call a Japanese v5 PST. There are no dates on the handles, but it was the last PST that was made for Leatherman in Japan. I would guesstimate as late 80's to early 90's. Some v5s had "hollow" rivets (the very early ones ?), but most had solid rivets like your example.
It is the most common JPST, but still not that common (there are a lot more PSTs made in the US). A nice piece of LM history

I agree with Greg in everything, except that it was the last PST that was made for Leatherman in Japan.
Last JPST version has "REG’D TM 1325473" on handles.
On Sam Lim's item is "US REG’D TM 1325473" - it's penultimate version of JPST and was produced in second half of 80's.Thanks! I had to re-read what you wrote and look up on "penultimate". Thats some deep vocabulary you have there.. 👍
-
@Sam Lim said:
Thanks! I had to re-read what you wrote and look up on "penultimate". Thats some deep vocabulary you have there.. 👍I thought how to write: last but one, next-to-last, second-to-last, second-last etc., but all online russian-to-english translators says this rich word: "penultimate" :)
-
-
. Nice ones!!! -
Great additions to your collection !

-
Great Find - well done !

-
2 very nice additions to the collection wow :o

-
Hello everyone! This thread is amazing, I recently inherited what looks like a brand new original PST and I was trying to figure out the year. It even has the original manual with it.
I think it’s a late 80’s US based on reading a lot of this thread but haven’t found one like this anywhere. BOTH handles are stamped the exact same Leatherman Tool, US Reg TM 1325473, Portland,OR. Ruler has inches and metric, knurled screws, drop point blade not clip, left hand?Can opener, small pivot, and no date stamp. Knife blade and pliers say Leatherman USA. Here are some pics, any guesses on year?
Also there’s very faint markings on one of the handles backsides that I can’t make out looks like just something ghosting into the metal.



-
@Shadowtek said:
Hello everyone! This thread is amazing, I recently inherited what looks like a brand new original PST and I was trying to figure out the year. It even has the original manual with it.I think it’s a late 80’s US based on reading a lot of this thread but haven’t found one like this anywhere. BOTH handles are stamped the exact same Leatherman Tool, US Reg TM 1325473, Portland,OR. Ruler has inches and metric, knurled screws, drop point blade not clip, left hand?Can opener, small pivot, and no date stamp. Knife blade and pliers say Leatherman USA. Here are some pics, any guesses on year?
Also there’s very faint markings on one of the handles backsides that I can’t make out looks like just something ghosting into the metal.
- Your item with clip point (saber) or short clip point knife blade - NOT drop point.
Please, add photo with full view of knife blade (on both your pictures blade type is not visible). - Your item have a date codes, it's may be poor visible, but they are there.
Anyway, it's quite usual version that was produced during period from 0495 to 0995 if it's clip point (saber) or from 0895 to 0396 if it's short clip point PST.
- Your item with clip point (saber) or short clip point knife blade - NOT drop point.
-
Welcome to
wowaboro is always great at placing dates in these
It would help if the whole knife was in view though
It does look like it would have datecodes in the handles to me as well
Check in them with a flashlight to make sure
It is a very nice looking PST though

-
Hello everyone! This thread is amazing, I recently inherited what looks like a brand new original PST and I was trying to figure out the year. It even has the original manual with it.
I think it’s a late 80’s US based on reading a lot of this thread but haven’t found one like this anywhere. BOTH handles are stamped the exact same Leatherman Tool, US Reg TM 1325473, Portland,OR. Ruler has inches and metric, knurled screws, drop point blade not clip, left hand?Can opener, small pivot, and no date stamp. Knife blade and pliers say Leatherman USA. Here are some pics, any guesses on year?
Also there’s very faint markings on one of the handles backsides that I can’t make out looks like just something ghosting into the metal.
- Your item with clip point (saber) or short clip point knife blade - NOT drop point.
Please, add photo with full view of knife blade (on both your pictures blade type is not visible). - Your item have a date codes, it's may be poor visible, but they are there.
Anyway, it's quite usual version that was produced during period from 0495 to 0995 if it's clip point (saber) or from 0895 to 0396 if it's short clip point PST.
Wow, so you are 100% right I think, I finally found the freaking date stamp and feel like a moron. It's got 0895 stamped on it. So i guess the rest is normal for it? here's a better picture of everything. I was on mobile before and it didn't play nice with the images.



- Your item with clip point (saber) or short clip point knife blade - NOT drop point.
-
Hello everyone! This thread is amazing, I recently inherited what looks like a brand new original PST and I was trying to figure out the year. It even has the original manual with it.
I think it’s a late 80’s US based on reading a lot of this thread but haven’t found one like this anywhere. BOTH handles are stamped the exact same Leatherman Tool, US Reg TM 1325473, Portland,OR. Ruler has inches and metric, knurled screws, drop point blade not clip, left hand?Can opener, small pivot, and no date stamp. Knife blade and pliers say Leatherman USA. Here are some pics, any guesses on year?
Also there’s very faint markings on one of the handles backsides that I can’t make out looks like just something ghosting into the metal.
- Your item with clip point (saber) or short clip point knife blade - NOT drop point.
Please, add photo with full view of knife blade (on both your pictures blade type is not visible). - Your item have a date codes, it's may be poor visible, but they are there.
Anyway, it's quite usual version that was produced during period from 0495 to 0995 if it's clip point (saber) or from 0895 to 0396 if it's short clip point PST.
Actually the plot thickens more, one handle says 0795 and one says 0895
- Your item with clip point (saber) or short clip point knife blade - NOT drop point.
-
Hello everyone! This thread is amazing, I recently inherited what looks like a brand new original PST and I was trying to figure out the year. It even has the original manual with it.
I think it’s a late 80’s US based on reading a lot of this thread but haven’t found one like this anywhere. BOTH handles are stamped the exact same Leatherman Tool, US Reg TM 1325473, Portland,OR. Ruler has inches and metric, knurled screws, drop point blade not clip, left hand?Can opener, small pivot, and no date stamp. Knife blade and pliers say Leatherman USA. Here are some pics, any guesses on year?
Also there’s very faint markings on one of the handles backsides that I can’t make out looks like just something ghosting into the metal.
- Your item with clip point (saber) or short clip point knife blade - NOT drop point.
Please, add photo with full view of knife blade (on both your pictures blade type is not visible). - Your item have a date codes, it's may be poor visible, but they are there.
Anyway, it's quite usual version that was produced during period from 0495 to 0995 if it's clip point (saber) or from 0895 to 0396 if it's short clip point PST.
Actually the plot thickens more, one handle says 0795 and one says 0895
Very normal to have handles with different datecodes in each side

- Your item with clip point (saber) or short clip point knife blade - NOT drop point.
-
Thanks! Didn’t know that, I’m learning so much.
-
A $1,200 PST...
-

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login