Scandinavian Knives
-
I always thought the Dokka looked like a great knife.

-
@Nix said:
(Funny how one 'finds' a knife stashed away in some bag, box, or drawer. "Oh, yeah, forgot about this one!")That reminded me of a drawer. So, brought to you by a spike in memory: Knives actually used for probably decades by generations gone by. One is definately a knife made for everyday chores, while the smaller one seems a bit more festive. Both should be old enough to potentially have been made from old truck leaf springs.
Fair warning: This might be a traumatic view for knife lovers or fragile souls. Parental guidance recommended. Pictures includes graphic displays of abusive sharpening with traditional water wheels, and might also show less than polished traditional knife workings.


-
(Funny how one 'finds' a knife stashed away in some bag, box, or drawer. "Oh, yeah, forgot about this one!")
That reminded me of a drawer. So, brought to you by a spike in memory: Knives actually used for probably decades by generations gone by. One is definately a knife made for everyday chores, while the smaller one seems a bit more festive. Both should be old enough to potentially have been made from old truck leaf springs.
Fair warning: This might be a traumatic view for knife lovers or fragile souls. Parental guidance recommended. Pictures includes graphic displays of abusive sharpening with traditional water wheels, and might also show less than polished traditional knife workings.
Cool knives [emoji106] Bet they have been part of a lot of memories [emoji16]
Sent fra min FRD-L09 via Tapatalk
-
Great post, Vidar!
Love the look of those old beauties.

-
Guardless saami style knives are meant to be handled safely by locking the pinky finger behind the grip during push cuts and similar movements where a standard grip could slip forwards.
This trick has roots back to the european bronze age where "short" handles are first encountered. This also allows for a very comfortable looser grip on the knife during things like chopping.
-Tom -
@T14 said:
Guardless saami style knives are meant to be handled safely by locking the pinky finger behind the grip during push cuts and similar movements where a standard grip could slip forwards.
This trick has roots back to the european bronze age where "short" handles are first encountered. This also allows for a very comfortable looser grip on the knife during things like chopping.
-TomGreat comments, Tom. I find that (with my big hands) I naturally do this with my pinky.
-
@T14 said:
Guardless saami style knives are meant to be handled safely by locking the pinky finger behind the grip during push cuts and similar movements where a standard grip could slip forwards.
This trick has roots back to the european bronze age where "short" handles are first encountered. This also allows for a very comfortable looser grip on the knife during things like chopping.
-TomThat's been my answer for a long time now, but I didn't know that was the traditional way of doing it. Good info mate.

-
@T14 said:
Guardless saami style knives are meant to be handled safely by locking the pinky finger behind the grip during push cuts and similar movements where a standard grip could slip forwards.
This trick has roots back to the european bronze age where "short" handles are first encountered. This also allows for a very comfortable looser grip on the knife during things like chopping.
-TomI'll have to try that now
-
(Funny how one 'finds' a knife stashed away in some bag, box, or drawer. "Oh, yeah, forgot about this one!")
That reminded me of a drawer. So, brought to you by a spike in memory: Knives actually used for probably decades by generations gone by. One is definately a knife made for everyday chores, while the smaller one seems a bit more festive. Both should be old enough to potentially have been made from old truck leaf springs.
Fair warning: This might be a traumatic view for knife lovers or fragile souls. Parental guidance recommended. Pictures includes graphic displays of abusive sharpening with traditional water wheels, and might also show less than polished traditional knife workings.
Ouch
Those look Finnish though, any word who made them?

-
@AlephZero said:
Those look Finnish though, any word who made them?
The small one might indeed be Finnish - the style looks a bit apart from the usual ones here. Those are Sami knives of course so I imagine very similar ones exist in Norway, Finland, Sweden and Russia alike.
The larger most likely an old Strømeng (Karasjok). No particular style clue, just a reasoned guess as most knives around here were bought from him back in the day. His knives had (and has) a good reputation for not chipping or breaking.
(I'm not sure if this is true, but a story goes that some tourist stopped by his workshop once. The tourist commented that the knives were expensive and wondered why. The smith asked if he had a knife already, and if he could take a look at it? The tourist said sure, and showed off some knife. The smith took it, laid it down edge up, and then chopped it in two with a Sami knife. "That is why it is expensive"... And "I see you need a new knife?" :D )
The pinky trick is handy for chopping - people with big hands might even put two fingers behind. I avoid thrusting with these knives personally, but as they are used to put down reindeer at times that certainly works too. For opening cans the initial hole is better done two handed - one to guide the knife down, and the other just slapping down on the broad handle end. (If you can't open a can without damage it is a bad Sami knife..)
(And now you know better than to hand over any precious knives to smiths looking to sell! :ahhh )
-
asking a smith (or a knifemaker) if you need a new knife is like asking a barber if you need a haircut
-
Great story, Vidar.

-
Strømeng has sourced a lot of their blades from Brusletto over the years. AFAIK they fell out over a case of an order of knives to the army. (I won't go into details since that would be pure rumor-mongering.) Traditionally, blades up north should be forged using Swedish car springs. :)
So tough blades, given their geometry, but neither hard nor very good at holding an edge. (And if old car springs have been used: A real risk of material fatigue weaknesses.)
-
this pinky behind the knife thing has me stumped a bit. can someone take a picture of what you actually meant because I have less control, feel a lot less safe and the small grip of my mora #1 feels even more cramped so I'm pretty sure I'm doing something wrong
-
@Steinar said:
Traditionally, blades up north should be forged using Swedish car springs. :)Indeed :) I guess there is a limit for how far back that tradition could go, but it seemed to have ended in the 80s or 90s or thereabouts. Everything after seems more polished and shiny. (Not that I've been paying much attention for the last something years). But as everyone knows, everything was better before - by now those blades were amazing great at everything :)
@Steinar said:
So tough blades, given their geometry, but neither hard nor very good at holding an edge. (And if old car springs have been used: A real risk of material fatigue weaknesses.)A big part of their use is tough chopping so that priority makes sense? I've never encountered it myself, but some blades did break - especially the longer ones. (Makes chopping all that more interesting and exciting..?)
@styx said:
this pinky behind the knife thing has me stumped a bit. can someone take a picture of what you actually meant because I have less control, feel a lot less safe and the small grip of my mora #1 feels even more cramped so I'm pretty sure I'm doing something wrongYou do get a less firm grip, but that makes it easier to chop and less chance of sliding? Well, at least with the Sami knives. I can't visualize how or if that works with a Mora #1 - I simply avoid that one.
Edit: I think I have succeded in removing all Mora #1 around here, but if I do find one still lingering I can try and take a picture.
-
wait, if it is for chopping then it might not work for other tasks as well
-
Vidar, this one is for you.
It's called the "Vidarr" as is purportedly inspired by Scandinavian designs. I don't know about that, but it does seem to have a touch of the medieval in it (as I look at it). Perhaps a bit of a Scandi Seax. Regardless, it's a beast of a knife.

I like it quite well, but....the handle is a bit narrow for me. With a saber grip, thumb up on the brass bolster, my pinky naturally falls on the back of the pommel. The angled pommel actually makes this fairly comfortable.
I took the shot outside in the snow on some pine boards to make it seem a bit more Scandinavian. Right?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

